Instruction/ maintenance manual of the product 4802 Attwood
Go to page of 2
S3 ELECTRONIC BILGE SWITCH 4801 / 4802 SA VE THESE INSTRUCTIONS INST ALLA TION INSTRUCTIONS 09/01 69460 Rev . B T his electronic bilge switch converts any standard bilge pump to automatic operation. Pump must operate on 12 OR 24 volts D.C. (see chart).
INTERRUPTEUR DE CALE ÉLECTRONIQUE S3 4801 / 4802 CONSERVEZ CES DIRECTIVES DIRECTIVES D’INST ALLA TION 09/01 69460 Rev . B Cet interrupteur de cale électronique convertit la pompe de cale standard en un fonctionnement automatique. La pompe doit fonctionner sur un courant continu de 12 OU 24 volts (reportez-vous au tableau).
An important point after buying a device Attwood 4802 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Attwood 4802 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Attwood 4802 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Attwood 4802 you will learn all the available features of the product, as well as information on its operation. The information that you get Attwood 4802 will certainly help you make a decision on the purchase.
If you already are a holder of Attwood 4802, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Attwood 4802.
However, one of the most important roles played by the user manual is to help in solving problems with Attwood 4802. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Attwood 4802 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
