Instruction/ maintenance manual of the product 3120 Attwood
Go to page of 2
3 ® Quasar 12-V olt 2-Mile Na vigational Light Without Wire Leads: 3100-3104, 3130-3134 With 7" Wire Leads: 3120-3124, 3150-3154 Attwood marine hardware, navigational lighting, bilge pumps, and other marine accessories are specified more than any other brand by America’s best-known boat manufacturers as original equipment.
2. Test lights for proper operation from dash-mounted control switch. MAINTENANCE Replace bulb, when necessary, with standard 8-watt automotive festoon type (Attwood #9230-7). WIRING INSTRUCTIONS The power source must be 12-volt DC ONLY. Use marine grade wire connectors only.
An important point after buying a device Attwood 3120 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Attwood 3120 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Attwood 3120 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Attwood 3120 you will learn all the available features of the product, as well as information on its operation. The information that you get Attwood 3120 will certainly help you make a decision on the purchase.
If you already are a holder of Attwood 3120, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Attwood 3120.
However, one of the most important roles played by the user manual is to help in solving problems with Attwood 3120. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Attwood 3120 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center