Instruction/ maintenance manual of the product LM-6601 POSIFLEX Business Machines
Go to page of 10
Part 1 I. FEATURES • 12.1” LCD monitor with tilt adjust for 2 nd display attached to FT series POS system • Spill proof and easy maintenance structure allowing easy cleaning • High quality TFT.
Part 2 II. CARTON CONTENTS 1. LCD Monitor panel unit (Main unit assembled with Stand) 2. L shape support bracket for LM - 6601 onto FT system 3. User ’ s Manual 4. VGA Cable: 21863241710 5. Fixing Screws:10684038123 (#6 - 32 12L) x 2 III. PARTS IDENTIFICAT ION IV.
Part 3 V. HARDWARE INSTALLATION A. VGA Port Power Preparat ion 1. Inquire for technical support from your dealer to set the power support in the VGA port of the FT system following the rele vant Technical Manual of the FT system.
Part 4 VI. APPLICATION A. TILT ANGLE ADJUST T he tilt angle of LM - 6601 can be easily adjust ed against a set of friction hinge . Just turn the panel at will. B. Power & OSD buttons “OSD” button : To enter OSD setup menu , or to perform the function selected in OSD operation.
Part 5 “BRIGHTNESS / CONTRAST ADJUST SUBMENU”: There are 3 icons in this submenu: . Press “OSD” button to select item or return to main menu. Press “N E XT” button to selec t among brightness, contrast and exit.
Part 6 “SEPARATE COLOR ADJUST”: When this item is selected, there will be 3 adjustment indication bars between the main menu area and the video signal mode. Press “N E XT” button to select among the 3 colors Red, Green and Blue respectively. Press “+” button to intensify that color.
Part 7 adjust submenu”. “HORIZONTAL POSITION”: When this item is selected, there will be only the horizontal position icon with a n adjustment indication bar under it between the main menu area and the video signal mode. Press “+” or “ - ” button to shift the screen display to right or left.
Part 8 “RESET TO DEFA ULT”: Pressing “OSD” button on this icon will set all parameters back to the status when the monitor left factory. “SMOOTHNESS / SHARPNESS ADJUST”: When this item is .
Part 9 VII. SUPPORTED DISPLAY MOD ES For video signals beyond the supported display modes, there will be a message “Out Of Range” on middle of screen. Maximum supported color depth is 18 bits or 262,144 colors. Supported display modes are as in the table: Display Resolution Refresh Rate (H z) Horizontal Frequency (KHz) 640*400 70 3 1.
Part 10 警告使用者 這是甲類的資訊產品 ， 在居住的環 境中使用時， 可能會造成射頻干 擾， 在這種情況下 ， 使用者會被要 求採取某些適當的對策 。 .
An important point after buying a device POSIFLEX Business Machines LM-6601 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought POSIFLEX Business Machines LM-6601 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data POSIFLEX Business Machines LM-6601 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, POSIFLEX Business Machines LM-6601 you will learn all the available features of the product, as well as information on its operation. The information that you get POSIFLEX Business Machines LM-6601 will certainly help you make a decision on the purchase.
If you already are a holder of POSIFLEX Business Machines LM-6601, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime POSIFLEX Business Machines LM-6601.
However, one of the most important roles played by the user manual is to help in solving problems with POSIFLEX Business Machines LM-6601. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device POSIFLEX Business Machines LM-6601 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
