Instruction/ maintenance manual of the product LM-2010 POSIFLEX Business Machines
Go to page of 10
Part 1 I. FEATURES • Light weight and high luminance LCD monitor for industrial and commercial use • Application covers POS, POIS (Kiosk), f actory Automation etc.
Part 2 II. MODEL NUMBERS LM - 2110: 10.4” LCD Monitor w/ stand LM - 2010: 10.4” LCD Monitor w/ support bracket for Posiflex hybrid terminals HT series III. CARTON CONTENTS 1. LCD Monitor panel unit 2. Base stand (for LM - 2110) or support bracket (for LM - 2010) 3.
Part 3 accompanying drawings . Use proper tool to cut the bridges off with the screw hole cover and VGA cable hole cover from the top cover and pole cover at points indicated by each pair of arrows in the drawings. Sand/Cut smooth the inside of the holes resulted.
Part 4 4. Adjust for bes t viewing tilt angle and engage the on screen display (OSD) adjustment for best display effect whenever necessary. The monitor will sign for “No Signal” status and go into power saving mode in 5 seconds when there is no video signal.
Part 5 “BRIGHTNESS / CONTRAST ADJUST SUBMENU”: There are 3 icons in this submenu: Press “OSD” button to select item or return to main menu. Press “NXT” button to select among brightness, contrast and exit.
Part 6 “SEPARATE COLOR ADJUST”: When this item is selected, there will be 3 adjustment indication bars between the main menu area and the video signal mode. Press “N XT” button to select among the 3 colors Red, Green and Blue respectively. Press “+” button to intensify that color.
Part 7 adjust submenu”. “HORIZONTAL POSITION”: When this item is selected, there will be only the horizontal position icon with an adjustment indication bar under it between the main menu area and the video signal mode. Press “+” or “ - ” button to shift the screen display to right or left.
Part 8 “RESET TO DEFAULT”: Pressing “OSD” button on this icon will set all parameters back to the status when the monitor left factory. “SMOOTHNESS / SHARPNESS ADJUST”: When this item is s.
Part 9.
Part 10 警告使用者 這是甲類的資訊產品，在居住的環 境中使用時 ， 可能會造成射頻干 擾，在這種情況下，使用者會被要 求採取某些適當的對策 。 T314.
An important point after buying a device POSIFLEX Business Machines LM-2010 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought POSIFLEX Business Machines LM-2010 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data POSIFLEX Business Machines LM-2010 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, POSIFLEX Business Machines LM-2010 you will learn all the available features of the product, as well as information on its operation. The information that you get POSIFLEX Business Machines LM-2010 will certainly help you make a decision on the purchase.
If you already are a holder of POSIFLEX Business Machines LM-2010, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime POSIFLEX Business Machines LM-2010.
However, one of the most important roles played by the user manual is to help in solving problems with POSIFLEX Business Machines LM-2010. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device POSIFLEX Business Machines LM-2010 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
