Instruction/ maintenance manual of the product KS-6215 POSIFLEX Business Machines
Go to page of 20
Part 1 FCC Notes: This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions manual, may cause interference to radio communications.
Part 2 ALERT TO OUR HONORABLE CUSTOMERS: l Please always read thoroughly all the instructions and documents delivered with the product before you do anything about it. Don’t take any premature action before you have a full understanding of the consequences.
Part 3 IN TRODUCTION PRODUCT PICTURES Front Views for KS - 6315/6217; AMD LX - 700 for KS - 6115 1. one optional Compact Flash memory card connector 2.
Part 4 Rear Views Bottom Views PARTS IDENTIFICATION 1. Main unit 2. Touch panel / LCD panel 3. Opti onal side mount kit e.g. SD - 400 4. Power indicator 5. Universal base stand 6. Slim base stand 7. Cable cover 8. Removal hollow in cable cover 9. Lock / release lever for tilt angle adjust 10.
Part 5 20. Auxiliary cable exit 21. Rubber feet 22. Optional CDROM drive PRODUCT FEATURES Standard Features: a) CPU: VIA C 7 1.0 G Hz or above b) Fanless structure w ith Aluminum die cast main unit casing for harsh environment or metal c) Data storage device: SATA HDD 3.
Part 6 11. 2 SATA ports for Serial ATA HDD in base or external device m) Touch control functions : left/right button, double click, drag & draw n) Dual display support (per OS capability) o) VGA m.
Part 7 INSTALLATION GUIDES CAUTION: Before any installation or cable connection to the set, please always make cert ain that the system is turned off and the external power source to the set is remove.
Part 8 SEPARATING MAIN UNIT In order to settle the touch terminal properly in a point of sale system, all the cable connections have to be routed through its base, either slim or universal.
Part 9 CABLE PASSAGE Please route all cables through the cable passage to main unit in desktop mount application. Hold them together with the cable tie. Pass all cables (but those for HDD and UPS bat tery) through the cable exit to external connections.
Part 10 pay particular attention to the environment requirements for UPS battery in next chapter “USING THE TOUCH POS”. BASE MOUNT UPGRADE KIT On rear edge of the stand assembly for desktop mount application, there is a rear connect cover.
Part 11 guide to mount the interface bracket and fix it to the rear connect area of the system as in the right picture. Route the VGA through the cable exit of the base stand to the main unit.
Part 12 arr owed in same picture. Gently arrange the excessive length of this cable back in the hole and screw - fit it back to the position originally occupied by the cover . Please reserve the cover if there is chance to have the side mount kit removed in the future.
Part 13 The area required for wall mount application is determined by the main unit dimensions and is 3 78 mm in width and 3 12 mm in height for KS - 6215 and is 4 10 mm in width and 3 55 mm in height for KS - 6217.
Part 14 there be any difficulty in using the Posiflex supplied USB interface CDROM drive in recovery, please try disable the USB 2.0 function of system BIOS setup by going to “ Integrated Peripheral.
Part 15 USING THE TOUCH TERMINAL APPLICATION ENVIRONMENT It is very important that you check the following operational guidelines: Ventilation This terminal must NOT be operated in an environment with restricted ventilation.
Part 16 Emergency treatment: The battery is constructed maintenance free and leakproof. It is well protected in KS system as long as the ambient temperature remains below 30 ° C and the ventilation of the KS system remains free.
Part 17 The relationship between the indicator status and other conditions is summarized in following table: Indicator St atus System Status External Power UPS Battery Powering Up Off Off Off Not pres.
Part 18 Automatic Power On Control The system may also turn on according to some preset c onditions such as Modem Ring Up and Alarm Clock Wake Up or LAN Wake Up.
Part 19 SERIAL PORTS – COM1/2 /3/4 In KS system , there are 4 serial ports in form of 10 pin RJ45 jacks available. All serial port s can supply a +5 V DC through pin 9 after proper jumper setting change. All ports are standard RS232 serial ports after the conversion cables as status at delivery .
Part 20 TOUCH PANEL All paragraphs below are applicable for models with touch panel only. The user of those models without touch panel can ignore them and consider this user ’ s manual ends here. Mou se Emulation The touch panel in KS system uses internal USB interface as standard and occupies no external port .
An important point after buying a device POSIFLEX Business Machines KS-6215 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought POSIFLEX Business Machines KS-6215 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data POSIFLEX Business Machines KS-6215 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, POSIFLEX Business Machines KS-6215 you will learn all the available features of the product, as well as information on its operation. The information that you get POSIFLEX Business Machines KS-6215 will certainly help you make a decision on the purchase.
If you already are a holder of POSIFLEX Business Machines KS-6215, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime POSIFLEX Business Machines KS-6215.
However, one of the most important roles played by the user manual is to help in solving problems with POSIFLEX Business Machines KS-6215. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device POSIFLEX Business Machines KS-6215 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
