Instruction/ maintenance manual of the product 7418 Porter-Cable
Go to page of 13
ESP AÑOL: PÁGINA 13 FRANÇAISE : P AGE 25 Double Insulated Disc Grinder Instruction manual The Model and Serial No. plate is located on the main housing of the tool. Record these numbers in the spaces below and retain for future reference. Model No.
2 GENERAL SAFETY RULES WARNING: READ AND UNDERSTAND ALL INSTRUCTIONS. Failure to follow all instructions listed below, may result in electric shock, fire and/or serious personal injury.
3 2. Dress properly. Do not wear loose clothing or jewelry. Contain long hair. Keep your hair, clothing, and gloves away from moving parts. Loose clothes, jewelry, or long hair can be caught in moving parts. 3. Avoid accidental starting. Be sure switch is OFF before plugging in.
4 SPECIFIC SAFETY RULES AND SYMBOLS 1. ALWAYS USE PROPER GUARD WITH GRINDING WHEEL. A guard protects operator from broken wheel fragments. 2 . ACCESSORIES MUST BE RATED FOR AT LEAST THE SPEED RECOMMENDED ON THE TOOL WARNING LABEL. Wheels and other accessories running over rated speed can fly apart and cause injury.
5 ______ – – – – .......................... alternating current 3 .......................... three-phase alternating current 3 N .......................... three-phase alternating current with neutral .......................... direct current n 0 .
6 8. CLEAN UP ALL REMOVED PAINT and dust by wet mopping the floors. Use a wet cloth to clean all walls, sills and any other surfaces where paint or dust is clinging. DO NOT SWEEP, DRY DUST OR VACUUM. Use a high phosphate detergent or trisodium (TSP) to wash and mop areas.
7 FUNCTIONAL DESCRIPTION FOREWORD Porter-Cable disc grinders are designed for numerous grinding operations. Typical applications are auto body grinding, smoothing welding beads, removing gates and flash from castings, and removing rust.
TO INST ALL WHEEL GUARD A TYPE 27 wheel guard is furnished with the tool. A TYPE 1 wheel guard is available as an accessory for cut-off wheels. Both guards are installed and adjusted in the same manner. WARNING: Always use an approved, and properly adjusted wheel guard where required (see ACCESSORIES Section of this manual).
4. Position inner flange (A) Fig. 6 onto spindle (B), with round hub facing outward, away from machine. Rotate flange until it drops into place on the spindle. CAUTION: Use Type 1 Wheel Guard when using Type 1 cut-off Wheels. 5. Position grinding wheel on spindle.
MAINTENANCE KEEP TOOL CLEAN Periodically blow out all air passages with dry compressed air. All plastic parts should be cleaned with a soft damp cloth. NEVER use solvents to clean plastic parts. They could possibly dissolve or otherwise damage the material.
ACCESSORIES A complete line of accessories is available from your Porter-Cable • Delta Supplier, Porter-Cable • Delta Factory Service Centers, and Porter-Cable Authorized Service Stations. Please visit our Web Site www.porter-cable.com for a catalog or for the name of your nearest supplier.
12 NOTES 300918- 08-13-02.qxd 9/13/02 3:26 PM Page 12.
The following are trademarks of PORTER-CABLE • DELTA (Las siguientes son marcas registradas de PORTER-CABLE • DELTA S.A.) (Les marques suivantes sont des marques de fabriquant de la PORTER-CABLE • DELTA): Auto-Set ® , BAMMER ® , B.
An important point after buying a device Porter-Cable 7418 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Porter-Cable 7418 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Porter-Cable 7418 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Porter-Cable 7418 you will learn all the available features of the product, as well as information on its operation. The information that you get Porter-Cable 7418 will certainly help you make a decision on the purchase.
If you already are a holder of Porter-Cable 7418, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Porter-Cable 7418.
However, one of the most important roles played by the user manual is to help in solving problems with Porter-Cable 7418. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Porter-Cable 7418 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
