Instruction/ maintenance manual of the product 2640 Porter-Cable
Go to page of 9
Double Insulated Drywall Scr ewdrivers Instruction manual The Model and Serial No. plate is located on the main housing of the tool. Record these numbers in the spaces below and retain for futur e reference. Model No. ______________________________________ T ype ___________________________________________ Serial No.
2 IMPORT ANT SAFETY INSTRUCTIONS WARNING: When using electric tools, basic safety pr ecautions should always be followed to reduce the risk of fir e, electric shock and personal injury , including the.
3 9. USE SAFETY GLASSES. W ear safety glasses or goggles while operating power tools. Also face or dust mask if operation creates dust. All persons in the area wher e power tools are being operated should also wear safety glasses and face or dust mask.
4 3. SOME WOOD CONT AINS PRESERVA TIVES WHICH CAN BE TOXIC. T ake extra care to prevent inhalation and skin contact when working with these materials. Request, and follow , any safety information available from your material supplier . MOTOR Many Porter -Cable tools will operate on either D.
5 2. Squeeze trigger switch (A) Fig. 1, to start motor , as the trigger switch is squeezed, the driver speed increases. The scr ewdriver bit will not rotate until engaged in a fastener and forward pr essure is applied to the tool. T o stop motor , release trigger switch.
6 3. Pull bit holder (B) Fig. 2, with bit straight out. If it is dif ficult to remove, grip with pliers and pull. NOTE: Bit (C) Fig. 2, may be removed fr om bit holder by pulling straight out. 4. Push new bit holder in spindle until ball in spindle snaps in groove in bit holder .
7 5. Apply forwar d pressur e to drive screw until depth stop r ests on the surface of the work. The depth stop should be adjusted so that the fastener head is sunk below the surface of the wallboard without cutting into the finished face. TO REMOVE SCREWS 1.
8 ACCESSORIES The testing of this tool has been accomplished with the following accessories. For safest operaton, it is recommended that only these accessories be used with the product. WARNING: Since accessories other than those listed have not been tested with this product, use of such accessories could be hazardous.
The following are trademarks of PORTER-CABLE • DEL T A Corporation (Las siguientes son marcas registradas de PORTER-CABLE • DEL T A S.A.) (Les marques suivantes sont des marques de fabriquant de l.
An important point after buying a device Porter-Cable 2640 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Porter-Cable 2640 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Porter-Cable 2640 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Porter-Cable 2640 you will learn all the available features of the product, as well as information on its operation. The information that you get Porter-Cable 2640 will certainly help you make a decision on the purchase.
If you already are a holder of Porter-Cable 2640, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Porter-Cable 2640.
However, one of the most important roles played by the user manual is to help in solving problems with Porter-Cable 2640. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Porter-Cable 2640 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
