Instruction/ maintenance manual of the product SX-200 Polycom
Go to page of 17
July 2008 Edition 1725-36137-001 Version E Mitel SX-50, -200, -2000 System LinkPlus Interface Guide SpectraLink 6000 System SpectraLink 8000 System.
LinkPlus Interface Guide: Mi tel SX-50, -200, -2000 System PN: 1725-36137-001_E.doc 2 Trademark Information Polycom® and t he logo design s SpectraLink® LinkPlus Link NetLink SVP Are trademarks and registe red trademarks of Polycom, Inc. in the Un ited States of Am erica and various c ountries.
PN: 1725-36137-001_E.doc 3 About this Guide Polycom is the market leader in multi-cellular wireless telephone systems for the workplace. We manufacture a range of products to suit any size installation. All Polycom products use our Lin kPlus digital integration technology to inte grate with various digital switch platforms.
LinkPlus Interface Guide: Mi tel SX-50, -200, -2000 System PN: 1725-36137-001_E.doc 4 Related Documents SpectraLink 6300 MCU : Operator’s Console (1725-36125-001) SpectraLink 6100 MCU: Installation and Operation (1725-36097-001) SpectraLink 6020 Wireless Telephone and Accessories User Guide (1725-36092-001) Available at http://www.
About this Guide PN: 1725-36137-001_E.doc 5 Icons and Conventions This manual uses the following icons and conventions. Caution! Follow these instructions carefully to avoid danger. Note these instructions carefully. Label This typeface indicates a key, label, or button on SpectraLink hardware.
.
PN: 1725-36137-001_E.doc 7 Plan the Interface The system administrator programs the telephone system for use with the Wireless Telephone System using the normal administration terminal or procedures. Programming can be done after the hands ets are registered.
LinkPlus Interface Guide: Mi tel SX-50, -200, -2000 System PN: 1725-36137-001_E.doc 8 “model” handsets then use the mod el as a template to program the other handsets. • All handsets are different : All handsets are programmed differently, so each handset will be programmed individually.
Plan the Interface PN: 1725-36137-001_E.doc 9 The Wireless Telephone Display The SpectraLink Wireless Telephone will display the telephone number as it is dialed. Certain characters may be used by the system tha t are not implemented in the handset. Flashi ng characters are not implemented on the handset, nor is rolling or scrolling of text.
LinkPlus Interface Guide: Mi tel SX-50, -200, -2000 System PN: 1725-36137-001_E.doc 10 Feature Programming Requirements When planning the interface, the fo llowing information must be taken into account: Line sequences The handset uses two types of key seq uences to access PBX features and multiple lines.
Plan the Interface PN: 1725-36137-001_E.doc 11 Function Menu Programming SpectraLink 6300 MCU Note that the function menu defaults set for the handset s associated with the SpectraLink 6300 MCU can be changed via the SpectraLink Operator’s Console.
LinkPlus Interface Guide: Mi tel SX-50, -200, -2000 System PN: 1725-36137-001_E.doc 12 Hold The Hold feature should be programmed to the Hold key as shown on the key-map diagrams so that when the Hold key or softkey is pressed on the handset, the call is placed on hol d.
PN: 1725-36137-001_E.doc 13 Interface Implementation This section describes the recommended programming to use the Wireless Telephone System (CPM interface module or SCX-416 MCU) with a Mitel PBX. The procedures assume: • The Mitel SX-200, SX-50, or SX-2000 system is installed and operational in an approved configuration.
LinkPlus Interface Guide: Mi tel SX-50, -200, -2000 System PN: 1725-36137-001_E.doc 14 Configuration. Scroll to Telephone Switch Type and press enter to change this field, from the Submenu of PBX types, select Mitel. Refer to SpectraLink 8000 Telephony Gateway: Administration Guide for SRP for details on configuring th e Telephone Switch Type.
Interface Implementation PN: 1725-36137-001_E.doc 15 The handset function menu default settings are s hown in the table below; these may be changed as described above in Function Menu Programming .
.
PN: 1725-36137-001_E.doc 1 7 Extension Assignments Worksheet Shelf: _______ Interface Module: _______ Handset # Ext. # Name Interface Module Circuit # Comment Handset Serial # Handset 1 1 Handset 2 2 .
An important point after buying a device Polycom SX-200 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Polycom SX-200 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Polycom SX-200 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Polycom SX-200 you will learn all the available features of the product, as well as information on its operation. The information that you get Polycom SX-200 will certainly help you make a decision on the purchase.
If you already are a holder of Polycom SX-200, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Polycom SX-200.
However, one of the most important roles played by the user manual is to help in solving problems with Polycom SX-200. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Polycom SX-200 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
