Instruction/ maintenance manual of the product 70 Polycom
Go to page of 10
Installing the iPower ™ 70 Room Camera.
Copyri ght © 20 00-2002: P olycom , Inc. Polyc om, Inc. , 4750 Wi llow Roa d, Plea sant on, CA 9458 8 www .pol ycom .com Polycom and the Poly com log o are register ed tradem arks of Polycom , Inc. Concorde, V enue, and W orldCar t are trademar ks of PictureT el Corporat ion.
3 About this Booklet This boo klet describes how to insta ll the iPower ® 70 r oom camera. The iPower 70 is a pan -tilt-zoom (PTZ) camera that is used with a iPower co llaboration s ystem as a mai n or an auxilia ry camera.
INSTALLING THE IPOWE R 70 ROOM CAMERA 4 Before Inst alling Wa r n i n g Before you begin this procedure, make sure you turn off your collaborati on system’s power sw itch.
Unpac k ing t he Box 5 Unp ack ing the Box T o remove the ca mera from the box: 1. With two hands, gras p the outside edges of the packing material and gently lift the unit from the box. 2. Carefully r emove the came ra from the pack ing material an d place it on a flat surface.
INSTALLING THE IPOWE R 70 ROOM CAMERA 6 Import a nt Note About Moving the Camera The iPower 70 camera is design ed to be contr olled (moved) from the collaborat ion system wi r eless keypad, the keybo ard, or the remote control. Be sure that your system is turned on befor e yo u move the camera.
Attaching the Camera to a Monitor 7 Att achin g the Camera to a Monitor Note: If you ar e installing a s econd mon itor for a iPower 90 0 system, be sur e to install the iPower 70 ca mera on the NTSC or P AL monito r and not on the VGA monitor .
INSTALLING THE IPOWE R 70 ROOM CAMERA 8 Connecting the Camera Cable Caution Whenever you plug a cable into th is camera, hold the camera by its base, not by the camera head. T o connect the camera cable: 1. Plug the 8-p in camera cable (labeled w ith the icon on bo th cable col lars) into the 8-pin camera conn ector on the back of the c amer a.
Con nectin g an Addi ti onal Power Cabl e 9 Connecting an Additional Power Cable Although the camera cable provides power to the iPower 70 camera, if you are using a camera cable longer than 32 .8 feet ( 10 meters), you must use an additional power cable for the camera.
INSTALLING THE IPOWE R 70 ROOM CAMERA 10 Service and Support For support or service, please contact your Polyco m service provider or ca ll Polycom T echnical Support. Y ou can find phone numbers for T echnica l Support in your area at the Polycom web site, www .
An important point after buying a device Polycom 70 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Polycom 70 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Polycom 70 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Polycom 70 you will learn all the available features of the product, as well as information on its operation. The information that you get Polycom 70 will certainly help you make a decision on the purchase.
If you already are a holder of Polycom 70, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Polycom 70.
However, one of the most important roles played by the user manual is to help in solving problems with Polycom 70. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Polycom 70 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
