Instruction/ maintenance manual of the product PSW650 Polk Audio
Go to page of 8
PSW S E R I E S PSW650 Instruction Manual 5601 METRO DRIVE, BALTIMORE, MAR YLAND 21215, USA, 410-764-5275, F AX: 410-764-5266 http://www .polkaudio.com RM1006-1.
FEA TURES: • T wo 10 inch direct radiating subwoofer drivers for deep bass, smooth response and low distortion. • Dual Power Port ™ bass ports for deep bass and high acoustic efficiency with low distortion. • High current 250 watt power amplifier .
Strip 1/2" of insulation from each of the two conductors on both ends to expose the bare wire. T wist the exposed wire of each conductor to form two un-frayed strands. Connect two conductors to the receiver or amp (refer to the owner’ s manual supplied with your electronics for assistance with proper hookup).
The “high pass crossover” switch (Figure 5) on the PSW650 gives you the option of filtering bass from your main front speakers for the purpose of increasing power handling and lowering distortion at high volume levels. If you are using small front main speakers, select “80Hz.
If the subwoofer output jack is filtered, we suggest using hook up OPTION #1 or #2 . If it is unfiltered, connect the subwoofer output jack to either of the line level “IN” jacks (Figure 8) . With Dolby Digital systems, select subwoofer as “on” or “yes” in the “speaker set up” or “bass management” function of your electronics.
SUBWOOFER ADJUSTMENTS SUBWOOFER LEVEL CONTROL Subwoofer level is adjustable via the knob located on the front of the sub- woofer under the logo pod. Play a piece of music that has an average amount of bass content. Start with the knob set to “5” and the “bass boost” switch set to 0.
13 PSW650 Driver Complement: 2 - 10"(25cm) woofers Amplifier Power: 250 watts Enclosure T ype: dir ect radiating, vented Port T ype: dual, r ear firing, Power Port ™ Overall Frequency Response:.
POLK AUDIO LIMITED W ARRANTY “Polk Audio,” “The Speaker Specialists,” and “Power Port” are trademarks of Britannia Investment Corporation used under license by Polk Audio Incorporated.
An important point after buying a device Polk Audio PSW650 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Polk Audio PSW650 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Polk Audio PSW650 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Polk Audio PSW650 you will learn all the available features of the product, as well as information on its operation. The information that you get Polk Audio PSW650 will certainly help you make a decision on the purchase.
If you already are a holder of Polk Audio PSW650, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Polk Audio PSW650.
However, one of the most important roles played by the user manual is to help in solving problems with Polk Audio PSW650. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Polk Audio PSW650 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
