Instruction/ maintenance manual of the product EVR-100 Pogo
Go to page of 48
Digital Voice Recorder(EVR-100).
Thank you for choosing Pogo’s exciting new digital product, the RipFlash Trio Digital Voice Recorder(EVR-100). For optimum performance please read the User Guide before operating the recorder.
Highlights and features Components and accessories Player controls Mode menus Power sources Power On/Off Playback/Stop Hold On Hold Off Search and Seek Volume controls Setting Menu Mode change Using the Internal Microphone Using the External Microphone Using Line-in Recording a.
The RipFlash Trio Digital Voice Recorder is a portable digital audio player as well as digital voice recorder. Users can save recorded voices as MP3 files, making the RipFlash Trio a very useful/power.
RipFlash Trio Primary Settings User Guide External Microphone Telephone Recording Adapter Line in/out cable Telephone Recording Cable Earphone Connector USB Cable PC install CD disc USB Power Converter Ni-MH 1.
6.
7.
8.
Slide the battery cover in the direction of the arrow. Open the battery cover in the downward direction as the picture indicates. Insert the rechargeable battery as shown in the picture. Adjust the (+)(-) polarities of the batteries in the compartment.
Connect the USB cable to the USB connector (port) of the PC when the PC is powerd on(as shown in the picture on the left.) Connect the USB cable to the USB power converter. Connect the USB cable to the USB port of PC when the player is powerd on. Press the MODE button on the player and select the following mode(s) in order: [SYSTEM]-[CHARGE]-[ON].
To power on, press the REC button for 2 seconds. To power off, press the PLAY/STOP Button 2 or more seconds. Pressing the PLAY/STOP button will play a file when the RipFlash Trio is powered on. Press the MODE button to go to the Menu. Select HOLD ON, and then press the PLAY/STOP button.
Press the MODE button to exit the menu. Press any buttons(except MODE button) to make sure KEY HOLD message is displayed on the LCD. While the Hold button is on, press the MODE button. Press the FF/REW button to move to OFF , then press the PLAY/STOP button.
During playback in the Stop mode, press the FF/REW button to navigate to the desired file. Adjust the volume by pressing (+)/(-) buttons. (If press (+)/(-) for a long time, volume level continuously goes up.) Press and hold the FF/REW button until the desired time, the RipFlash Trio will start playback from that point.
VOICE MODE Voice Recording and Playback. FM RADIO MODE User can save FM frequencies and record/listen to FM broadcasting as well. FM PLAY MODE Play back recorded FM radio and/or broadcasting. ERASE MODE Erase each files and/or folder of VOICE MODE, AUDIO MODE and FM PLAY MODE.
Press the MODE button to move to MENU in Voice Mode. Press the FF/REW button to move to SOURCE menu, and then press the PLAY/STOP button to select. Press the FF/REW button to move to MIC menu; press the PLAY/STOP to select it and press the MODE button to exit MENU.
Use the same method described for the external microphone: set [MENU]-[SOURCE]-[MIC]. Connect the external microphone to external jack of the RipFlash Trio using earphone connector. In the STOP state of VOICE MODE(or AUDIO MODE), press the REC button to start recording.
Connect the audio cable to the microphone jack of the RipFlash Trio using the earphone connector( ). Connect the other head of the audio cable to telephone adapter( ). Connect the incoming telephone line (a service line) to the telephone adapter( ). Connect the telephone cable between the telephone and telephone adapter( ).
Connect the audio cable to micro- phone jack of the RipFlash Trio using the earphone connector(a) and connect the other head of audio cable to the earphone jack of the audio devices. Press the REC button to start recording. To pause recording, press the REC/ Pause button.
Quickly press the MODE button. Press the FF/REW button to move to the M/S menu and then press the PLAY/STOP button. Press the FF/REW button to choose either MONO or STEREO, and then press the PALY/STOP button. Press the MODE button to exit the menu. Make sure the icon on the LCD.
Press the MODE button. Press the FF/REW button to move to the QUALITY menu, and then press the PLAY/STOP button. Press the FF/REW button to select among LQ, MQ and HQ, and then press the PLAY/STOP button. Press the MODE button to exit menu, make sure the icon is on the LCD.
Quickly press the MODE button. Press the FF/REW button to move to SYSTEM menu, and then press the PLAY/STOP button. Press the FF/REW button to move to VOR menu, then press the PLAY/STOP button and select VOR ON. Then press the PLAY/STOP button. Press the FF/REW button to select your desired time and press the PLAY/STOP button.
Press the MODE button 2 seconds to change to VOICE MODE(or AUDIO MODE, FM PLAY MODE). Press the FF/REW button to select the desired file and then press the PLAY/STOP button to play. (To stop, press PLAY/STOP button again.) To change the play speed, press the MODE button up to 2 seconds during playback.
Press the MODE button. Press the FF/REW button to navigate to REPEAT and then press the PLAY/STOP. Press the FF/REW button to select NORMAL-ONE-ALL- INTRO and then press the PLAY/STOP button. Press the MODE button to exit the menu(make sure the REPEAT icon is on the LCD display).
Press the PLAY/STOP button to play the selected file in VOICE MODE. Press the REC button to set the start point(the beginning of a section). Press the REC button once again to set the end point(the ending of a section). The specific section you selected will be played repeatedly.
the Press MODE button quickly in AUDIO MODE to move to the MENU. Press the FF/REW button to select SPEAKER, and then press the PLAY/STOP button. Press the FF/REW button to navigate to SPEAKER ON. Press the PLAY/STOP to select. Press the MODE button to exit the MENU.
Press the MODE button in AUDIO MODE. Press the FF/REW button to move to EQ and then press the PLAY/STOP button to select. Press the FF/REW button to move to the desired equalizer mode and press the PLAY/STOP button to select. Press the MODE button to exit the MENU.
Press the MODE button. Press the FF/REW button to navigate to REPEAT, then press the PLAY/STOP. Press the FF/REW button to select NORMAL-ONE-ALL- INTRO and then press the PLAY/STOP button. Press the MODE button to exit the menu. The REPEAT icon on the LCD should be lit.
In FM RADIO MODE, press the FF/REW button to select a channel. Press the FF/REW button two seconds (or longer). The frequency will go up/down and will seek channels automatically (Auto-seeking function). After selecting a channel press the MODE button.
Once the preset channels have been selected, press the PLAY/STOP button to change the channel. Press the REC button to record FM broadcasting while listening to FM radio. To pause recording, press the REC button again. To resume recording, press the REC button once.
Press the MODE button for 2 seconds to change from FM MODE to FM PLAY MODE. Press FF/REW button to select the appropriate file. Press the PLAY/STOP button to play recorded FM radio file. Repeat, A B repeat, EQ function is available in the FM PLAY MODE (as it is in AUDIO MODE).
Press the MODE button for 2 seconds to change to ERASE MODE. Press the Volume(+)(-) button to select the folder erased (VOICE FOLDER, AUDIO FOLDER, FM FOLDER.) If select ERASE ALL is selected, all files in the selected folder will be erased. Press the FF/REW button to move to ERASE FILE and then press the PLAY/STOP button.
Place the installation CD into your CD-ROM drive. The installation dialogue box (VR Manager InstallSheild Wizard) will be displayed on Monitor. If the dialogue box does not display, double click [Start]-[My Computer]-[CD-ROM]-[autorun.exe] on the PC. Reboot your PC when the installation is complete.
connect the provided USB cable to a USB port of your PC. Power on the RipFlash Trio and open the USB rubber cap, then connect the USB cable to the USB port. Make sure the USB CONNECT message appears on the LCD display. Connect the USB cable to the player in the STOP state.
Double click the VR Manager Icon to execute the manager program. If the internal memory is formatted, all previously downloaded fonts will be removed as well. To restore lost fonts download the fonts again from the VR Manager by following these steps: Select [Tool]-[Font]- [Download].
Select the Music folder from the VR Manager. Select the file to be downloaded from the PC, then click the download button. The DOWNLOADING status window will be displayed.
Select a folder to save uploaded file. Select the file to upload from each folder. then click upload button. The UPLOADING status window will be displayed.
37 Select a folder to delete file. Select the file to be deleted and click the DELETE button. The REMOVING status window will be displayed. Erased/deleted files can not be recovered.
The MoodLogic software connects to a data service that can identify your digital music files and automatically categorize and correctly label your songs. MoodLogic allows you to easily filter your songs based on their Genre, Artist, Tempo, Release Year, and Mood.
To manually create a playlist, click the New Playlist button and name the playlist. Then, go to the Search View and find your favorite tracks. Drag the songs you like and drop them onto your newly created playlist. Transferring songs and mixes to your RipFlash.
MoodLogic is music mix management software. It is designed to enhance the experience with your RipFlash. The MoodLogic Light Version is included with your MP3 Manager CD. It is recommended that you install MoodLogic to manage your songs and create mixes.
Using the full version of MoodLogic, you can split your playlists into various sizes to fit your RipFlash storage capacity. This option is available from your Instant MusicMix View, from all saved playlists, and the Search View.
1. Safety Precautions Do not use or place product : - In high temperature(above 60 ) - Inside a car with closed windows(during the summer) - In areas with high humidity(such as bathrooms) - In direct sunlight or near the heaters - In dusty places Do not drop the product.
1. Check the battery and recharge if necessary. 2. Make sure the battery is properly inserted to match the (+),(-) polarities. 3. Make sure the battery cover is properly shut. Remove the battery and wait awhile before replacing. 1. Check the status of the HOLD switch.
44 MP3/WMA CATEGORY ITEM SPECIFICATION Stereo 20Hz ~ 20KHz 6mW(L) + 6W(R) : 16 , Max. Volume 85dB (with A-weighting filter) Channels Frequency Range Earphone Out S/N Ratio FM Radio Frequency Range Earphone Out S/N Ratio Reciver Type 87.5 ~ 108MHz (Korea/USA/Europe) 76 ~ 90MHz (Japan) 6mW(L) + 6mW(R) : 16 , Max.
.
.
.
www.pogoproducts.com.
An important point after buying a device Pogo EVR-100 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Pogo EVR-100 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Pogo EVR-100 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Pogo EVR-100 you will learn all the available features of the product, as well as information on its operation. The information that you get Pogo EVR-100 will certainly help you make a decision on the purchase.
If you already are a holder of Pogo EVR-100, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Pogo EVR-100.
However, one of the most important roles played by the user manual is to help in solving problems with Pogo EVR-100. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Pogo EVR-100 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
