Instruction/ maintenance manual of the product POE-152 Planet Technology
Go to page of 11
- 1 - IEEE 802.3af Pow er ov er Ethernet Injector POE-152 User’s Manual.
- 2 - Trademarks Copyright PLANET Technol ogy Corp. 200 6. Contents subjec t to revisio n without prior notice. PLANET is a registered trademark of PLANET Technology Corp.
- 3 - TA BLE OF CONTENTS 1. INTRODUCT ION ........................ ....................................................... ....................................................... .... 4 1.1 C HECKLIST ................................... ..............
- 4 - 1. INTRODUCTION 1.1 Check list Thank y ou for purchasing our POE-152 IEEE 802.3af Power over Ethernet Injector, y our Power over Ethernet Injector pack age shall contains followi ng contents: Ch.
- 5 - 1.4 Spec ification Model POE-152 Ethernet Con nector 2 x RJ-45( 1 for da ta + DC out, 1 for Data in ) Ethernet Dat a rate 10/100/1 000Mbps( vary on Ethern et device a ttached) Input volta ge DC 48V, 0.
- 6 - 2. HA RDWA RE INSTA LLA TION This product provides three different running speeds – 10Mbps, 100Mbps, 1000Mbps in the same device and auto- matica lly distin guishes the spe ed of in coming connec tion. This sectio n describ es the hardware fea tures of POE-152.
- 7 - 2.2 POE -152, the Injector ins tallation 1. Connec t a stan dard network c able from Switch/workstation to “Etherne t” port of POE-152. 2. Connec t the lon g cable that will be u sed to c onnect t o the rem ote device to the po rt “Ethernet + DC” .
- 8 - Figure 3: Connectio n architecture over POE-152/152S Notice: 1. According to IEEE 802.3a f s tandard, the POE-152 wi ll not inject power to the cable if not connecting to IEEE 802.3af devices. 2. Please ensure the output vo ltage is correct bef ore apply ing power to remote device.
- 9 - 3.TROUBLESH OOTING This c hapter contains inf ormation to help you solve issues. If the POE-152 is n ot functioni ng properly, make sure the POE-152 was set u p accord ing to i nstructio ns in th is man ual. The PoE LED is not lit Solution : Check th e cable connec tion between POE-15 2 and IEEE 8 02.
- 10 - A PPENDIX A NETWORKING CONN ECTION A .1 Sw itch‘s RJ-45 Pin Assignments 1000Mbps, 1000B ase T Contact MDI MDI-X 1 BI_DA+ BI_DB+ 2 BI_DA- BI_DB- 3 BI_DB+ BI_DA+ 4 BI_DC+ BI_DD+ 5 BI_DC- BI_DD-.
- 11 - There are 8 wires on a s tandard UTP/STP cable and each wire is col or-coded . The f ollowing shows the p in alloc ation and col or of stra ight cab le and c rossover c able con nection : Figur.
An important point after buying a device Planet Technology POE-152 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Planet Technology POE-152 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Planet Technology POE-152 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Planet Technology POE-152 you will learn all the available features of the product, as well as information on its operation. The information that you get Planet Technology POE-152 will certainly help you make a decision on the purchase.
If you already are a holder of Planet Technology POE-152, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Planet Technology POE-152.
However, one of the most important roles played by the user manual is to help in solving problems with Planet Technology POE-152. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Planet Technology POE-152 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
