Instruction/ maintenance manual of the product PXL2430MW Planar
Go to page of 40
www .planar .c om USER'S GUIDE 使用手册 LED T ouch Monitor 触控屏液晶显示器 PXL2430MW.
Content Operation Instr uctions ......................................................................................................... .......................................... 1 Unpacking In structions ............................................
Operation Instructions Thank you for purchasing the PX L 2430MW multi-touch LED monitor. Please read this guide thoroughly before installation. FCC RADIO FREQUENCY INTERFERENCE STATEMENT WARNING: (FOR.
Unpacking Instructions Move the LED Monitor out of the package and take off the plastic bag and Polystyrene Foam. Pull the base from Parallel versus Panel to Vertical. Adjust the Panel between 0° leaning forward and 20° leaning backward.
Front View of the Product ① ② ③ ④ ⑤⑥⑦ ① T ouch P en Slot ② OSD Turn On/ Off ③ Volume Adjust/ Scroll Down/ Adjust Decrease ④ Preset Mode/ Scroll UP/ Adjust Increase ⑤ Input sele.
Rear View of the Product ⑧ ⑨ ⑩ ⑪ ⑫ ⑬ ⑭ ⑧ Power Input ⑨ U SB - Type A to B ⑩ Headphone Jack ⑪ Audio Input ⑫ HDMI input (HDMI 19 pin) ⑬ DVI Input (DVI 24 pin) ⑭ VGA Input (D-.
Quick Installation 1. Connect either VGA, DVI or HDMI Video Source from the monitor to the computer. Make sure both monitor and computer are powered OFF. 2. Connect the audio cable from audio output of computer to the audio input of the monitor. 3. Connect the USB cable from the computer to the monitor.
Basic Operation and Calibration/Reset Instructions Before using the Touchscreen LED Monitor: Connect external equipment properly. Insert the power plug, and the power LED indicator will light orange. Power On/Off To turn the Touchscreen LED Monitor on/off: Press POWER button on the front.
Option 2: OSD & Power button lock – all 5 buttons including the “POWER” button are locked. Press and hold the 1 button and the ▼ button for 10 seconds to lock all 5 buttons. The Touchscreen LED Monitor will show a “Lock Out” message for 3 seconds and the message will disappear automatically.
Advanced Operation—OSD Menu You can use the OSD menu to adjust various settings for your Touchscreen LED Monitor. Press the 1 button to display the OSD Menu, and use ▲▼ to select the desired OSD menu.
Color Adjust: To select the color for improving brightness and color saturation between 9300K, 6500K, 5400K, and User Color. 9300K: Adds blue to screen image for cooler white. 6500K: Adds red to screen image for warmer white and richer red. 5400K: Adds green to screen image for a darker color.
Setup Menu: To set up Language, OSD Position , OSD Time Out and OSD Background. Language Select: To allow users to choose from available languages. OSD Position: Press ▼ or ▲ button to select between horizontal and vertical OSD Position adjustment.
Supporting Timing Modes STANDARD RESOLUTION VGA 720 x 400 @ 70Hz VGA 640 x 480 @ 60Hz MAC 640 x 480 @ 67Hz VESA 640 x 480 @ 72Hz VESA 640 x 480 @ 75Hz VESA 800 x 600 @ 56Hz VESA 800 x 600 @ 60Hz VESA .
Technical Information Panel 23.6” TFT (wi th L ED ba ck lig ht ) Power Management On: 21 Watts (typical), 40 Watts (maximum) Standby Mode: < 0.5 Watt Off: < 0.5 Watt Displayable Resolution Full HD 1920 x 1080 max. Vertical Frequency 60Hz max. Pixel Dimension 0.
Wall-Mount Installation Instructions Wall Mount Arm not included Turn the power OFF then disconnect the cables from the Touchscreen LED Monitor before performing the procedure below. 1. Lay the Touchscreen LED Monitor face down on a soft surface. 2. Remove the two pieces of flake and Hinge Cover.
Troubleshooting No power Make sure A/C power cord is securely connected to the power adapter and the power supply is firmly connected to the Touchscreen LED Monitor . Plug another electrical device into the power outlet to verify that the outlet is supplying proper voltage.
Product Registration and Technical Support Register Your Planar Products Today Thank you choosing Planar. To assure you receive all the benefits of your Planar product and services, register your Planar product today. Visit our website to register your product at http://www.
目录 操作说明 .............................................................................................................................. 1 开箱说明 .........................................................................................
操作说明 感谢您购买 PXL2430MW 多点触控屏液晶显示器。请在安装前认真阅读本指南。 FCC 无线电频率干扰声明 警告 : （仅针对有 FCC 证明的型号） 本显.
开箱说明 从包装箱中取出 触控屏液晶 显示器，取下塑料袋，然后取下 保丽龙 。 将基座从与面板平行的方向推到与其垂直的方向。 显示屏可.
产品前视图 ① ② ③ ④ ⑤⑥⑦ ① 触控笔插槽 ② 屏幕显示菜单开 / 关 ③ 音量调整 / 向下滚动 / 降低 ④ 预设模式 / 向上滚动 / 增加 ⑤ 输入源选择 / .
产品后视图 ⑧ ⑨ ⑩ ⑪ ⑫ ⑬ ⑭ ⑧ 电源输入（交流输入） ⑨ 上行 USB 端口（连接到电脑） ⑩ 耳机插孔 ⑪ 音频输入 ⑫ HDMI 输入 (HDMI 19 针 ) ⑬ DVI 输.
快速安装 1. 将显示器的 VGA 、 DVI 或 HDMI 视频源连接到计算机。务必确保显示器和计算机关闭。 2. 将音频线的一端插入计算机的音频输出端，另一端插入显示器的音频输入端。 3. 將 USB 连接线從计算机连接到显示器。 4.
基本操作和校准 / 复位说明 在使用触控屏液晶显示器之前： 正确地连接外部设备。 插入电源插头，电源 LED 指示灯将亮橙色。 通电 / 断电 为打.
选项 2 ： “ OSD 和电源”按钮锁——所有 5 个按钮，包括“电源”按钮，全被锁定。 按住 1 按钮和 ▼ 按钮，保持 10 秒，以锁定所有 5 个按钮。 触控屏.
高级操作 — OSD 菜单 您可以使用 OSD 菜单，调整触控屏液晶显示器的各种设置。 按 1 按钮，以显示 OSD 菜单，并使用 ▲▼ 来选择所需的 OSD 菜单。 按钮.
色彩调整 : 在 9300K 、 6500K 、 5400K 和用户自定义色彩中选择不同设置以增加亮度 和色彩饱和度。 9300K ： 向屏幕图像中增加蓝色以呈现冷白色。 6500K ： .
设定菜单: 用于设置语言选择、菜单位置、菜单显示时间和菜单背景色。 语言选择 : 让用户从提供的语言中选择。 菜单位置 : 按 ▼ 或 ▲ 按钮调整水平.
支持的时钟模式 标准 分辨率 VGA 720 x 400 @ 70Hz VGA 640 x 480 @ 60Hz MAC 640 x 480 @ 67Hz VESA 640 x 480 @ 72Hz VESA 640 x 480 @ 75Hz VESA 800 x 600 @ 56Hz VESA 800 x 600 @ 60Hz VESA 800 x.
技术信息 液晶显示屏 59.94cm (23.6”) TFT ( 带有 LED 背光灯 ) 电源管理 接通： 21W （标准值）， 40W （最大值） 待机模式： < 0.5W 断开： < 0.5W 可显示的分辨率 全高清最大 1920 x 1080 ，场频最大 60Hz 像素尺寸 0.
符合 RoHS 规范声明 本产品有毒有害物质或元素的名称及含量标识如下表 : 有毒有害物质或元素 部件名称 铅 （ Pb ） 汞 （ H g ） 镉 （ Cd ） 六价铬 （ Cr.
壁掛安裝說明 不包括壁挂安装臂 在开始执行下述程序之前，先关闭电源，然后断开触控屏 液晶显示器的电缆。 1. 将触控屏液晶显示器面朝下放在一个软表面上。 2. 取下两件薄片和铰链盖。 3.
故障排除 电源不通 确认交流电源线已可靠连接到电源插座和触控屏显示器。 将另外一件电器的电源线插头插入插座，以此确认插座能提供正常的.
产 品注册和技术 支持 立即注册您的 Planar 产品吧 感谢您选择 Planar 产品。为保证您享受 Planar 产品和服务的所有益处，请立即注册您的 Planar 产品。 请访问我们的网站 http://www.planar.com/support/product_registration.
1 7.
注意事项 - 本条款和条件直接影响您作为 Planar 产品最终用户的权利、义务和补救措施。在本文 中，“最终用户”指产品仅供个人使用，而不得转售、.
缺陷产品的运费。请核实 RMA 退货标签上的序列号与被退缺陷产品的序列号是否一致。请贴上 随提前更换产品一同发送的预付 RMA 退货标签。 3) 对于 33 .
4) 因下列事项造成损坏、恶化或故意： a. 事故、滥用、误用、疏忽、不当通风、火灾、水灾、灾祸、雷电或其他自然灾害、接 触烟雾（香烟等）、擅自修改产品（包括未经授权安装）或未遵照随产品提供的说明 书。 b.
有关更多信息或最近的 Planar 服务中心名称，请联系您的 Planar 经销商，或致电 Planar （免费） 1- 866-PLANAR1 (1-866-752-6271) （免费）或 (1-503-748-5799) ，或发送电子邮件至 PlanarSupport@Planar.com 。 保修续展服务 有关保修续展服务，请查阅 Planar 网站： http://www.
020-1123-00B 2001132358P.
An important point after buying a device Planar PXL2430MW (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Planar PXL2430MW yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Planar PXL2430MW - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Planar PXL2430MW you will learn all the available features of the product, as well as information on its operation. The information that you get Planar PXL2430MW will certainly help you make a decision on the purchase.
If you already are a holder of Planar PXL2430MW, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Planar PXL2430MW.
However, one of the most important roles played by the user manual is to help in solving problems with Planar PXL2430MW. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Planar PXL2430MW along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
