Instruction/ maintenance manual of the product PL1702 Planar
Go to page of 17
PL1702.
1 Contents Preface ................................................. 2 Installation .............................................. 4 Unpacking ............................................................................................................
2 Preface This manual is designed to assist users in setting up and usin g the LCD Monitor. Information in this document has been carefull y checked for accuracy; however, no guar antee is given to the corre ctness of the contents. The information in this document is subject to change without notice.
3 Important Safety Instructions Please read the following in structions carefully. This manual should be retain ed for future use. 1. To clean the LCD Monitor screen: -- Power off the LCD Monitor and unplug the AC Cord. -- Spray a non-solvent cleaning solution onto a rag.
4 Installation Unpacking Before unpacking the LCD Monitor, prepare a suitable wor kspace for your Monitor and computer. You need a stable and clean surface near a wall power outlet. Make sure that the LCD Monitor has enough space around it for sufficient airflow.
5 Connecting the LCD Monitor and Base When you open the box, take the base and put on the desk first. Then connect the LCD Monitor and base.(See fig.1-1 ) Figure 1-1 Viewing Angle Adjustment The LCD Monitor is designed to allow users to have a comfortable viewing angle.
6 Connecting the AC Power 1. Connect the power cord to the LCD Monitor.(See Fig. 1-6) 2. Connect the powe r cord to an AC power source . Connecting the Audio Cable 1. Connect the audio cable to the “LINE OUT “ jack on your PC's audio card or to the front panel' s “AUDIO OUT” jack of your CD ROM drive.
7 Display Controls User Controls A brief description and the location of all LC D Monitor functions controls and indicators: Figure 2-1 1 Power LED will be Green when the monitor is on, Yellow when in power saving mode, and Dark when the monitor is off.
8 Function Description Icon Function Function Description Brightness 101 scales of brightness are availa ble to choose from (0 to 100). Contrast 101 scales of contrast are available to choose from (0 to 100). H. Position This function let's you adjust the display's horizontal position.
9 OSD Lock Out Function When monitor is in normal display, you ca n enable the “OSD Lock Out” function. Option 1 : OSD lock – all 4 buttons are locked except the “POWER” button. Press and hold the , and buttons for same time 3 seconds to lock the buttons.
10 Technical Information Specifications LCD Panel Size 17" (43 cm) Display Type Active matrix color TFT LCD Resolution 1280 x 1024 Display Dot 1280 x (RGB) x 1024 Display Area (mm) 337.92 x 270.336 (H x V) Display Color 16.7M (RGB 6 bits+FRC) Lamp Voltage (typical) 660 Vrms Lamp Current (typical) 7.
11 Power Management Mode Power Consumption* AC Input LED Color DPM ON 48W maximum 240 VAC GREEN DPM OFF 2W maximum 240 VAC Yellow DC switch off 1W maximum 240 VAC Dark Disconnected 2W maximum 240 VAC Dark Meeting VESA DPM requirements measured from AC Input end of AC power cord.
12 Standard Timing Table If the selected timing is NOT included in table below, th is LCD monitor will use the most suitable available timing. SYNC TOTAL ACTIVE SYNC FRONT BACK PIXEL TIMING FH(kHZ) FV(HZ) POLARITY (DOT/ LINE) (DOT/ LINE) WIDTH (DOT/LINE) PORCH (DOT/LINE) PORCH (DOT/LINE) FOREQ (MHZ) 640x350 31.
13 1280x960 60.00 + 1800 1280 112 96 312 108.00 (60Hz) 60.00 + 1000 960 3 1 36 1280x960 70.00 + 1800 1280 112 96 312 126.00 (70Hz) 70.00 + 1000 960 3 1 36 1280x960 75.
14 Troubleshooting This LCD Monitor has pre-adjusted using factory standard VGA timings. Due to the output timing differences among various VGA cards in the market, users may initial ly experien ce an unstable or unclear displa y whenever a new display mode or new VGA card is selected.
15 Product Registration and Technical Support Register Your Planar Products Today Thank you choosing Planar. To assure you receiv e all the benefits of your Planar product and services, re gister your Planar product today. Visit our website to register your product at http://www.
HDPNRD3700I.
An important point after buying a device Planar PL1702 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Planar PL1702 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Planar PL1702 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Planar PL1702 you will learn all the available features of the product, as well as information on its operation. The information that you get Planar PL1702 will certainly help you make a decision on the purchase.
If you already are a holder of Planar PL1702, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Planar PL1702.
However, one of the most important roles played by the user manual is to help in solving problems with Planar PL1702. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Planar PL1702 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
