Instruction/ maintenance manual of the product PJT195RW Planar
Go to page of 21
.
1 Contents Preface ......................................................................................... 2 Installation ................................................................................... 4 Unpacking ...............................
2 Preface This manual is designed to assist users in setting up and usin g the LCD Monitor. Information in this document has been carefull y checked for accuracy; however, no guar antee is given to the correctness of the contents. The information in this document is subject to change without notice.
3 Important Safety Instructions Please read the following in structions carefully. Th is manual should be retained for future us e. 1. To clean LCD Monitor screen; -- Power off LCD Monitor and unplug the AC Cord. -- Spray a non-solvent cleaning solution onto a rag.
4 Installation Unpacking Before unpacking the LCD Monitor, prepare a suitable wor kspace for your Monitor and computer. You need a stable and clean surface near a wall power outlet. Make sur e that LCD Monitor has enough space around it for sufficient airflow.
5 Viewing Angle Adjustment The LCD Monitor is designed to allow users to have a comfortable viewing angle. The viewing angle can be adjusted from -2°to +90°.(See fig. 1-1) Figure 1-1 Warning Do not force the LCD Monitor over its maximum viewing angle settings as stated above.
6 Connecting the AC Power 1. Connect the power cord to the LCD Monitor.(See Fig. 1-5) 2. Conn ect the power cord to an AC po wer source. Figure1-5 Connecting the Audio Cable 1. Connect the audio cable to the "LINE OUT" jack on your PC's audio card or to the front panel' s “AUDIO OUT” jack of your CD ROM drive.
7 Display Controls User Controls A brief description and the location of all LC D Monitor functions controls and indicators: Figure 2-1 1 Power LED will be Green when monitor is on, be yellow when in power saving mode, be dark when monitor in off mode.
8 Adjusting the Monitor's Display Main OSD Main Menu icon Sub Menu item Sub Menu item Description STANDARD Default Setting. Reflec ts native display capability. MOVIE Displays scenes in clearest detail. Pictures and photographs appear in vibrant colors with sharp detail.
9 FULL Selects wide format for display. Expansion Mode ASPECT Selects 4:3 format for display. Auto Adjustment Auto adjusts the H/V Position, Phase and Clock of picture. (available in analog mode only) H. Position Adjusts the horizontal position. (available in analog mode only) V.
10 Information Shows the resolution, H/V frequency and input port of current input timing. Icon Function Description 9300 CIE coordinated Color Temperature of 9300°K Sets the CIE coordinate color tem.
11 OSD Lock Out Function When monitor is in normal display, you can enable the “OSD LOCK OUT” function. Option 1 : OSD & Power button lock-all 5 buttons including the “POWER” button are locked.
12 Technical Information Specifications LCD Panel Size 19W" Display Type Active matrix color TFT LCD Resolution 1440 x 900 Display Dot 1440x (RGB) x 900 Display Color 16.7M with FRC or Dithering Video Input Signal Analog RGB 0.7Vp-p Input Impedance 75 Ohm ± 2% Polarity Positive, Negative Amplitude 0 - 0.
13 Power Management Mode Power Consumption* AC Input LED Color DPM On 42 W maximum 240 VAC Green DPM Off 2 W maximum 240 VAC Yellow DC switch off 1 W maximum 240 VAC Dark * Meeting VESA DPM requirements measured from A C Input end of AC power cord. S y n c I n p u t A n a l o g Signal Separate TTL compatible horizontal and vertical synchronization.
14 Standard Timing Table If the selected timing is NOT included in table below, th is LCD monitor will use the most suitable available timing. SYNC WIDTH FRONT PORCH BACK PORCH TIMING NAME FH (KHz) FV (Hz) SYNC POLARITY TOTAL/ ACTIVE (DOT / LINE) (DOT / LINE) PIXEL FOREQ.
15 SYNC WIDTH FRONT PORCH BACK PORCH TIMING NAME FH (KHz) FV (Hz) SYNC POLARITY TOTAL/ ACTIVE (DOT / LINE) (DOT / LINE) PIXEL FOREQ.(MHz) 1024x768 60.023 + 1312 1024 96 16 176 VESA-768-75Hz 75.029 + 800 768 3 1 28 78.75 1024x768 60.24 – 1328 1024 96 32 176 80 1152x864 54.
16 Troubleshooting This LCD Monitor has been pre-adjusted using factor y standard VGA timings. Due to the output timing differences among various VGA cards in the market, users may initial ly experien ce an unstable or unclear displa y whenever a new display mode or new VGA card is selected.
17 Touch Screen Driver Installation The PJT155R/ PJT175R/ PJT195RW is available with USB connection. The touch software is located on the enclosed CD-ROM for these operating systems: Windows® 7, VISTA, XP, 2000, ME, 98, NT4.
18 PJT155R/ PJT175R/ PJT195RW Install Instructions If you are using a PC running Wind ows® 7, VISTA, XP, 2000, ME, 98, NT4.0, follow the instructions below: 1. Power on the PC. 2. Be sure the USB cable is connected from the PC to the LCD display. 3. Download the driver online and execute.
19 Product Registration and Technical Support Register Your Planar Products Today Thank you choosing Planar. To assure you receiv e all the benefits of your Planar product and services, re gister your Planar product today. Visit our website to register your product at http://www.
Customer Service 24x7 Online T echnical Suppor t: http://ww w .planar.com/support 1195 NW Compton Drive Beaverton, OR 97006-1992 T el: 1-866-PLANAR1 (866-752-6271), or +1 503-748-5799 outside the United States, Hours: 24 hours a day , 7 days a week 2012 Planar Systems , Inc.
An important point after buying a device Planar PJT195RW (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Planar PJT195RW yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Planar PJT195RW - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Planar PJT195RW you will learn all the available features of the product, as well as information on its operation. The information that you get Planar PJT195RW will certainly help you make a decision on the purchase.
If you already are a holder of Planar PJT195RW, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Planar PJT195RW.
However, one of the most important roles played by the user manual is to help in solving problems with Planar PJT195RW. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Planar PJT195RW along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
