Instruction/ maintenance manual of the product LX1250TI Planar
Go to page of 35
.
Preface: This manual is designed for use with the LX1250TI industrial display. Information in this document has been carefully checked for accuracy; however, no guarantee is given to the correctness of the contents. The information in this document is subjec t to change without notice.
LX1250TI User Manual 3 USAG E N OTICE .....................................................................................................................................................................................................................
LX1250TI User Manual 4 USAGE Notic e Precautions To maximize the life and safe use of your unit, always be sure to follow the warnings, precautions and maintenance recommendations in this user’s guide. In a Vehicle: The monitor should be visible to the driver only if it is used for navigation, system control or vehicle information.
LX1250TI User Manual 5 Introduction About Planar’s LX1250TI Rugged Touch Monitor The LX1250TI is a high-performance, rugged touch monitor intended for d emanding environments, such as those inside mining vehicles. The monitor features a 12.1-in ch diag onal liquid crystal display with XGA resolution, bright enough to be read in full sunlight.
LX1250TI User Manual 6 Figure 1 Rendering of the display Reference Document # 076 -0672-00 f or detail ed draw ings. Front View (Descriptions): 1. Backlight control + 2. Backlight Control – 3. LED: Green When video present; Amber when there is no video signal present and the monitor will go into standby mode .
LX1250TI User Manual 7 All mounting & str ain relief holes M4 x 8 mm.
LX1250TI User Manual 8 Product highlig hts Designed for demanding transportation environment Optimized for in cab sunlight viewability One button Display/CPU power on/off Control of backlight dimming .
LX1250TI User Manual 9 Package Overview The following items are shipped with the display: Monitor Quick Start Guide NOTE: No cables ship with the monitor. Cables are purchased separately . Installation Before Installi ng Keep the following in mind while installing the m onitor.
LX1250TI User Manual 10 No cables or power supply are shipped with this monitor, they are available as accessories for order separately. Electrical & SW Ins tallation : Prior to end unit installation verify display works with computing system. 1. Power up display: a.
LX1250TI User Manual 11 Using the displ ay: 1. Once installed and cabled. The display is read y to use. 2. Apply system power. 3. Display & Touc h screen are active Using the Touchscreen 1. The LX1200TI touchscreen a llows y ou to operate the computer by touching the scre en with a I nger or stylus, rather than using a mouse or keyboard.
LX1250TI User Manual 12.
LX1250TI User Manual 13 The following table defines the factory set values for the adjustable parameters. *Backlight retains previous brightness settings. Auto Power On The display automatically turns on when power is restored after a power failure and maintains all operational settings.
LX1250TI User Manual 14.
LX1250TI User Manual 15.
LX1250TI User Manual 16.
LX1250TI User Manual 17.
LX1250TI User Manual 18.
LX1250TI User Manual 19.
LX1250TI User Manual 20.
LX1250TI User Manual 21.
LX1250TI User Manual 22.
LX1250TI User Manual 23 Troubleshooting the Monitor.
LX1250TI User Manual 24 If you are experiencing trouble with the LX1200TI monitor, refer to the following. If the problem persists, please contact your local dealer or o ur service center. Problem: No image appears on screen • Make sure the brightness is not turne d all the way down.
LX1250TI User Manual 25 Performance Conditions Performance characteristics are guaranteed over the envir onmental specification range. This product will be in used in the following condi tions: Dusty .
LX1250TI User Manual 26 Volume Control None: through OS control only . Only available on LX1250TI, LX1251, does not have Audio. Function Buttons on Front of display The LX1250TI will have buttons and LEDs on the front of the display for user interaction.
LX1250TI User Manual 27 Touchscreen controller Built into touch screen frame Externally accessible for firmware updat es Video Controller board Requires standard VGA Auto sync on power up and any video mode change.
LX1250TI User Manual 28 Pin Description Pin Description Pin Description 4 Audio in 23 RX2- 17 Gnd Logic 4 3 Audio out 16 RX2+ 20 H plug detect 2 H- sync VGA 25 DVI VGA SCL 19 +5 V DVI 1 V- sync VGA 24.
LX1250TI User Manual 29 USB Manufacture: LTW Part number: LTWUB-20PMFP-SC8002 Description: USB, B TYPE, Female, IP-68 rated Physical Specifications Optical requirements Maximum luminance through touchscreen: 650 cd/m2 (nits) typical Maximum luminance at full dimming Less than 5 nits.
LX1250TI User Manual 30 Voltage Transients Protected against voltage transients above +/-30V for 100ms Reverse polarity protection The display shall have reverse polarity protection as long as there is a slow blow fuse for power 12 V use fuse 2A 24 V use fuse 1A Maximum Power Consumption Maximum: <10 W @ 12 or 24V Typical power consumption: 7.
LX1250TI User Manual 31 VESA Mount A VESA mount feature must be included on the LX1250TI, located on the back cover. Standard 100 and 75 mm VESA mount M4 x .7 threaded hole pattern. The holes shall be blind. Additional M4 threaded mounting or cable management locations on rear of display also inclu ded to support vertical cable routing.
LX1250TI User Manual 32 Regulatory Compliance Electromagnetic Compatibility (EMC) Must be verified to comply with the following: Emissions 47 CFR. Part 15, Subpart B, Class A CE EMC Directive 2004/108.
LX1250TI User Manual 33 Reliability The MTBF of the LX1250TI shall be 30,000 hours at 25°C demonstrated by test or calculation, excluding brightness degradation.
LX1250TI User Manual 34 Product Specifications Overview 5 Display Type LCD Active Matrix Flat Panel Display (TFT) Viewable Size 12.1 inch Display Viewing Area 246 (W) x 184 (H) mm Display Color 262 K .
LX1250TI User Manual 35 020 -1121-00 A.
An important point after buying a device Planar LX1250TI (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Planar LX1250TI yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Planar LX1250TI - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Planar LX1250TI you will learn all the available features of the product, as well as information on its operation. The information that you get Planar LX1250TI will certainly help you make a decision on the purchase.
If you already are a holder of Planar LX1250TI, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Planar LX1250TI.
However, one of the most important roles played by the user manual is to help in solving problems with Planar LX1250TI. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Planar LX1250TI along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
