Instruction/ maintenance manual of the product AT-LINE-PRO2 Atlona
Go to page of 16
User Manual CV/SV/PC/HD/HDMI 1080p Scaler Box AT-LINE-PRO2 atlona.com Toll free: 1-877-536-3976 Local: 1-408-962-0515.
1. Introduction .................................................. 2 2. Features .................................................. 2 3. Package Contents .................................................. 2 4. Operation Controls and Functions ........
Atlona Scaler Box is designed to upscale digital/analog video signal from Composite, S-Video, PC, Component (HD) and HDMI input sources, to digital HDMI output of wide-range HDTV and PC resolutions, up to 1080p and WUXGA (1920 x 1200.
4.1 Front Panel 1. POWER Button and LED Indicator: Press the button to turn ON/OFF the power of the unit. The LED will illuminate when the power is turned on. 2. IR remote control sensor. 3. Input Selection Buttons and LED Indicators: Press each of the buttons (CV/SV/COMP/PC/HDMI) to select the desired input source.
4.2. Rear Panel 1. HDMI OUT and CO-AX OUT: Connect the HDMI OUT port to the HDMI input port of your display such as HDTV. Connect the CO-AX OUT port to the Coaxial (S/PDIF) input port of your amplifier for separate digital audio output.
4.3. OSD Operation 1st Tier Option 2nd Tier Option Adjustment VIDEO PICTURE MODE USER / STANDARD / VIVID / MOVIE CONTRAST 0 ~ 100 of Contrast Level BRIGHTNESS 0 ~ 100 of Brightness Level HUE 0 ~ 100 o.
4.4. Remote Control 1. POWER: Press the button once to power on the AT-LINE-PRO2. Press again to enter standby mode. 2. INPUT: Press the button repeatedly to toggle through various input sources. 3. HD Input: Press the button to directly select component input.
* The connection between AT-LINE-PRO2 and remote controller with RS-232 modem cable. Pins definition of modem cable AT-LINE-PRO2 Remote Controller PIN Definition PIN Definition 1 NC 1 NC 2 TxD 2 RxD 3.
(A) Set Commend: Command Code Response Description S POWER 0 > POWER OFF POWER OFF S POWER 1 > POWER ON POWER ON S SOURCE 0 > SOURCE CV CV INPUT S SOURCE 1 > SOURCE SV SV INPUT S SOURCE 2 .
Command Code Response Description S PICTURE MODE 0-3 > PICTUREMODE STANDARD- USER 0:STANDARD; 1 :MOVIE; 2:VIVID; 3:USER, PICTURE MODE OUTPUT S CONTRAST 0-100 > CONTRAST 0-100 CONTRAST 0-100 ADJU.
(B) Status Commend Command Code Response Description R POWER > POWER ON SHOW POWER STATUS R SOURCE > SOURCE CV-HDMI SHOW SOURCE STATUS R OUTPUT > OUTPUT NATIVE-WUXGA SHOW OUTPUT STATUS R SIZE.
6.1. General Specification • Frequency bandwidth: 1.65Gbps (single link) • Input Ports: Composite x 1 / L7R x 1 S-Video x 1 / L/R x 1 Component (3 RCA) x 1 / UR x 1 PC D-Sub (15-pin) x 1 / 3.
Resetting the device to original settings: While the unit is plugged in to the Power Supply: 1. Press and hold the MENU button. 2. Unplug the Power Supply from the backand wait 5 seconds. 3. Plug the Power Supply back in and release the MENU button. 4.
Safeguards Precautions FCC regulations state that any unauthorized changes or modifications to this equipment, not expressly approved by the manufacturer, could void the user’ s authority to operate this equipment. Operate this product using only the included external power supply.
Atlona, Inc. (“Atlona”) Limited Pr oduct Warranty Policy Coverage Atlona warrants its products will substantially perform to their published specifications and will be free from defects in materials and workmanship under normal use, conditions and service.
Atlona, Inc Pr oduct Registration Thank you for purchasing this Atlona product. - We hope you enjoy it and will take an extra few moments to register your new purchase. Registration creates an ownership record if your product is lost or stolen and helps ensure you’ll receive notification of performance issues and firmware updates.
An important point after buying a device Atlona AT-LINE-PRO2 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Atlona AT-LINE-PRO2 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Atlona AT-LINE-PRO2 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Atlona AT-LINE-PRO2 you will learn all the available features of the product, as well as information on its operation. The information that you get Atlona AT-LINE-PRO2 will certainly help you make a decision on the purchase.
If you already are a holder of Atlona AT-LINE-PRO2, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Atlona AT-LINE-PRO2.
However, one of the most important roles played by the user manual is to help in solving problems with Atlona AT-LINE-PRO2. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Atlona AT-LINE-PRO2 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
