Instruction/ maintenance manual of the product X-CM32BTD-K Pioneer
Go to page of 44
X-CM32BTD -K/-W CD Receiver System Operating Instructions Discov er the benefits of registering your product online at http://www .pioneer .co.uk (or http://www .
WARNING This equipment is not waterproof . T o prevent a fire or shock hazard, do not place any container filled with liquid near this equipment (such as a vase or flower pot) or expose it to dripping, splashing, rain or moisture.
Information for users on collection and disposal of old equipment and used batteries These symbols on the products, packaging, and/or accompanying documents mean that used electrical and electronic products and batteries should not be mixed with general household waste.
4 En Thank you for buying this Pionee r product. Please read through these operating inst ructions so that you will know how to operate your model prope rly. After you have finished reading the instructions, put them in a safe place for future reference.
Before you start 01 5 En English Français Español Chapter 1: Before you start What’s in the b ox Please confirm that the followi ng accessories are in the box when you open it.
Part names and functions 02 6 En Chapter 2: Part names and functions Remote control 1 STANDBY/ON Switches the receiver between standby and on (page 19). 2 Input function button s Use to select the input source to this receiver (page 19). iPod (X-CM42BTD only) Use to switch between the iPod c ontrols and the receiver controls (page 16).
Part names and functions 02 7 En English Français Español 10 Playback contro l buttons Use to control each function af ter you have selected it using the input function buttons (page 19). 11 Tuner control buttons ST/MONO Use to switch the sound mode between stereo and monaural.
Part names and functions 02 8 En Attaching the Non-skid pads Apply the accessory non-skid pads to the bottom surfaces of the speakers. Important • Use the speaker is usually in an upright position. When placing speakers upright When placing the speakers vertically upright, attach the non- skid pads to the bottom surface of t he speakers.
Part names and functions 02 9 En English Français Español Front panel 1M a i n d i s p l a y 2 Volume co ntrol Use to set the listening volume (page 13). 3 Volume illumin ation Light when the power on. 4 Headphone socket Use to connect headphones. When the headphones are connected, there is no sound output from the speakers.
Part names and functions 02 10 En Top panel 1 iPod/iPhone connector port (X-CM42BTD only) To connect the iPod/iPhone, press the PUSH OPEN tab (page 17). 2 STANDBY/ON Switches the receiver between standby and on (page 19). 3 Playback control buttons Selects the desired track or file to be played back.
Connections 03 11 En English Français Español Chapter 3: Connections CAUTION • Be sure to t urn off the powe r and unplug th e power cord from the power outlet whenever making or changing connections. • Connect the power cord after all the connections between devices have been completed.
Connections 03 12 En Connecting antennas • Connect the DAB/FM wire antenna as shown below. • To improve reception and sound quality, connect external antennas (see Using external antennas ). 1 Connect the DAB/FM wire antenna into the DAB/FM antenna soc ket.
Getting started 04 13 En English Français Español Chapter 4: Getting started To turn the power on Press the STANDBY/ON to turn the p ower on. After use: Press the STANDBY/ON to enter the power stand-by mode. Note • In standby mode, if iPod/iPhone/iPad is connected, the unit turns charge mode.
Getting started 04 14 En Sound contro ls Equalizer When the EQUALIZER is pressed, the current mode setting will be displayed. To change to a different mode, press the EQUALIZER repeatedly until the desired sound mode appears. P.bass control When the power is first turned on, the unit will enter t he P.
Getting started 04 15 En English Français Español Calling the wake-up timer It can be used to re-use an existing timer setting. 1 As well as steps 1 through 3 in “S etting the wake-up timer”. 2 Press / to select “TIMER ON”, then pre ss ENTER.
iPod/iPhone/iPad playback 05 16 En Chapter 5: iPod/iPhone/iPad playback Merely by connecting your iPod/i Phone/iPad to this unit, you can enjoy high-quality sound fr om yo ur iPod/iPhone/iPad. Confir ming what iPod/i Phone/ iPad models are supported The iPod/iPhone/iPad playable on this unit are shown below.
iPod/iPhone/iPad playback 05 17 En English Français Español Connecting iPod/iPhone to the top panel (X-CM42BTD only) 1 Press the PUSH OPEN. 2 Open the iPod/ iPhone connector por t.
iPod/iPhone/iPad playback 05 18 En 2 Set up to stand the iPod/iPhone/iPad. When using an i Pod/iPhone Make sure the iPod/iPhone cable is aligned along the groove for it on the back of the stand that comes with the unit. When using iPad Make sure to place the iPad in a horizontal dir ection on the stand.
Disc playback 06 19 En English Français Español Chapter 6: Disc playback This system can play back a st andard CD, CD-R/RW in the CD format and CD-R/RW with MP3 or WMA files, but cannot record on them. So me audio CD-R an d CD-RW discs may not be playable due to the state of the disc or the device that was used for recording.
Disc playback 06 20 En Advanced CD or MP3/WM A disc playback Direct track search By using the numeric buttons, the desired tracks on the current disc can be played. Use the numeric buttons on the remote control to select the desired track whilst playing the selected disc.
Disc playback 06 21 En English Français Español Programmed play (CD or M P3/WMA) You can choose up to 32 selections for play back in the order you like. 1 Whilst in the sto p mode, press MEMORY / PROGRAM on the remote co ntrol to enter the programming save mo de.
Disc playback 06 22 En Specify the folder to play Specify the folder to play, do the follwing steps. 1 Press CD , and load an MP3/ WMA disc. 2 Press FOLDER , and press / to select desired playback fo lder. 3 Press ENTER . Playback will start from the first song of th e selected folder.
USB playback 07 23 En English Français Español Chapter 7: USB playback Playing USB sto rage devices It is possible to listen to two-channel audio using the USB interface on the front of this receiver. • Pioneer does not guarantee th at any file recorded on a USB storage device will play or that power will be supplied to a USB storage device.
USB playback 07 24 En Specify the folder to play Specify the folder to play, do the follwing steps. 1 Press USB , and connect the U SB storage device. 2 Press FOLDER , and press / to select desired playback fo lder. 3 Press ENTER . Playback will start from the first song of th e selected folder.
Using the tuner 08 25 En English Français Español Chapter 8: Using the tuner Listening to the radio broadcasts The following steps sh ow you how to tune in to FM and D AB+ radio broadcasts using the au tomatic (search) and manual (step) tuning functions.
Using the tuner 08 26 En To reca ll a me mori sed sta tio n 1 Press PRESET +/– to select the de sired station. To scan the preset stations The stations saved in the memory can be scanned automatically. (Preset memory scan) 1 Press and hold PRESET +/– .
Using the tuner 08 27 En English Français Español • If no station can be found, “NO FOUND” will appear for 4 seconds. Information provided by RDS Each time the RDS DISPLAY is pressed, the disp.
Using the tuner 08 28 En Listening to the DAB+ About DAB+ (Digital Audio Broadcasting) Digital Audio Broadcasting is a digital transmission system where audio signals are converted to digital signals for broadcasting. DAB+ is broadcast as a group of data called multiplex (ensemble) which may contain one or more stations (services).
Using the tuner 08 29 En English Français Español Changing the information display You can switch DAB+ display information. Press the DAB DISPLAY button. Each time the b utton is pressed, the i nformation displa y changes in the following order. When "NO SIG" appears, the DAB DISPLAY button does not allow you to change the display.
Other connections 09 30 En Chapter 9: Other connections CAUTION • Before making or changing the connections, switch off the power and disconnect the power cord from the AC outlet. Connecting auxilia ry components Connect the front panel A UDIO IN mini-plug jack to your auxiliary playback component.
Bluetooth ® Audio playback 31 En English Français Español 10 Chapter 10: Bluetooth ® Audio playback Music playback using Bluetooth wireless technology The unit is capable of playing back music stored on Bluetoot h capable devices (cell phones, digital music players etc.
Bluetooth ® Audio playback 32 En 10 Note • This unit will be displayed as “X- CM32”, “X-CM325” or “X- CM42” on all Bluet ooth capable devices that you have. Pairing will start. •P l a c e t h e Bluetooth capable device close to the unit.
Bluetooth ® Audio playback 33 En English Français Español 10 Radio wave caution This unit uses a 2.4 GHz radio wave frequency, which is a band used by other wireless systems (see list below). To prevent noise or interrupted co mmunication, do not use this unit nearby such devices, or make sure these devices are switched off during use.
Additional information 11 34 En Chapter 11: Additional information Troubleshooting Incorrect operations are often mistaken for trouble and malfuncti ons. If you think that there is something wrong with this component, check the points below. Sometimes the trouble may lie in another component.
Additional information 11 35 En English Français Español When a USB storage device is connected When an iPod/iPhone/iPad is connected Probl em Check Remedy USB storage device is not recogn ized. Is the USB storage device proper ly connected? Connect the de vice securely (all the way in).
Additional information 11 36 En When the Bluetooth wireless technology device is connected or operated Playable disc s and formats • Only the discs that have been finalized can be played. • Discs recorded in packet write mode (UDF format) are not compatible with th is unit.
Additional information 11 37 En English Français Español Cautions on use When moving this unit When moving this unit, be sure to first check that there is no disc loaded and disconnect the iPod/iPhone/iPad. Then press STANDBY/ON , wait for “STANDBY” disappears on main display to turn off, then unplug the po wer cord.
Additional information 11 38 En Handling discs Storing • Always pla ce discs in their c ases and store them vertically, avoi ding hot, humid pl aces, places expose d to direct sunligh t and extremely col d places. • Be sure to read the cautions inc luded with the disc.
Additional information 11 39 En English Français Español Specifications • Amplifier section RMS Power Output: . . . . . . . . . . . . . . . . . . . . . . . 15 W + 15 W (1 kHz, 10 %, T.H.D., 8 ) • Tuner section Frequency Range (FM). . . . . .
Additional information 11 40 En X-CM32_VXE8_En.book 40 ページ ２ ０１４年３月 １２日 水曜 日 午後２時５２ 分.
Additional information 11 41 En English Français Español X-CM32_VXE8_En.book 41 ページ ２ ０１４年３月 １２日 水曜 日 午後２時５２ 分.
PIONEER HOME ELECTRONICS CORPORATION Declaration of Conformi t y with regard to the R& T TE Directive 1 999/5/EC Manufacturer: 1-1, Shin-ogura, Saiwai-ku, Kawasaki-shi, Kanagawa 212-0031, Japan EU Representative’s: Pioneer Europe NV Haven 1087, Keetberglaan 1, 9120 Melsele, Belgium http://www .
Português: Čeština: Eesti: Magyar: Latviešu valoda: Lietuvių kalba: Malti: Slovenčina: Slovenščina: Română: бъ лгарски: Polski: Norsk: Íslenska: Pioneer declara que este [*] está conforme com os requisitos essenciais e outras disposições da Directiva 1999/5/CE.
Printed in China © 2014 PIONEER HOME ELECTRONICS CORPORA TION. All rights reser ved. http://www .pioneer .co.uk http://www .pioneer .eu < Y OM200145-0018 > PIONEER HOME ELECTRONICS CORPORA TION 1-1, Shin-ogura, Saiwai-ku, Ka wasaki-shi, Kanagaw a 212-0031, Japan PIONEER ELECTRONICS (USA) INC.
An important point after buying a device Pioneer X-CM32BTD-K (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Pioneer X-CM32BTD-K yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Pioneer X-CM32BTD-K - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Pioneer X-CM32BTD-K you will learn all the available features of the product, as well as information on its operation. The information that you get Pioneer X-CM32BTD-K will certainly help you make a decision on the purchase.
If you already are a holder of Pioneer X-CM32BTD-K, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Pioneer X-CM32BTD-K.
However, one of the most important roles played by the user manual is to help in solving problems with Pioneer X-CM32BTD-K. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Pioneer X-CM32BTD-K along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
