Instruction/ maintenance manual of the product SC-LX56 Pioneer
Go to page of 124
Operating Instructions AV Receiv er S C-LX 56.
2 The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
3 Thank you for buying this Pioneer product. Please read through these operating instructions so you will know how to operate your model properly. Contents 01 Before you start Checking what’s in the box ..............................................
4 10 Controlling the rest of your system About the Remote Setup menu ....................................................................................................................................... 76 Operating multiple receivers ..............
5 Flow of settings on the receiver Flow for connecting and setting the receiver The unit is a full-fledged AV receiver equipped with an abundance of functions and terminals. It can be used eas - ily after following the procedure below to make the connections and settings.
6 Checking what’s in the box ............................................................................................................ 7 Our philosophy ..............................................................................................
7 01 Before you start Checking what’s in the box Please check that you’ve received the following supplied accessories: ! Setup microphone (cable: 5 m) ! Remote control unit ! AAA size IEC R03 dry .
8 01 Before you start % Dolby Pro Logic llz compatible Adding a pair of speakers above the front left and right speakers adds expressiveness in the vertical direction to the previous horizontally-oriented sound field. The height channel strengthens the sound field’s sense of three- dimensionality and air, producing presence and expansion.
9 01 Before you start Operating range of remote control unit The remote control may not work properly if: ! There are obstacles between the remote control and the receiver’s remote sensor. ! Direct sunlight or fluorescent light is shining onto the remote sensor.
10 Remote control .............................................................................................................................. 11 Display ...............................................................................................
11 02 Controls and displays Remote control This section explains how to operate the remote control for the receiver. RECEIVE R D. AC CESS CH LEVE L DIMMER HDMI OUT SLEEP SIGNAL SEL MCACC AU T O/ALC/ DIRECT TH X AU TO S.RTR V ST ANDARD ADV SURR SPEAKER S D.
12 02 Controls and displays 10 MULTI-ZONE select buttons Switch to perform operations in ZONE 2 and ZONE 3 ( page 72 ). 11 Remote control LED Lights when a command is sent from the remote control. 12 Switches the remote to control the receiver (used to select the white commands).
13 02 Controls and displays Display HDMI DIGIT AL ANALOG L C R SL SR XL XR XC LFE AU TO DIGIT AL PL US AU TO SURROUND STREAM DIRECT PROL OGIC x Neo: 6 THX AD V .
14 02 Controls and displays Front panel MASTER VOLUME STANDBY /O N INPUT SELECTOR i Pod iPhone iPad HDMI ADVANCE D MCAC C FL OF F PHONES SPEAKERS MULTI-ZONE CONTROL ON/OFF MCACC SETUP MIC ENTER TUNE T.
15 02 Controls and displays 20 iPod iPhone iPad USB terminals Use to connect your Apple iPod/iPhone/iPad as an audio and video source ( page 36 ), or connect a USB device for audio and photo playback ( page 36 ). 21 HDMI input/MHL connector Use for connection to a compatible HDMI device (Video camera, etc.
16 Connecting your equipment ......................................................................................................... 17 Rear panel ......................................................................................................
17 03 Connecting your equipment Connecting your equipment This receiver provides you with many connection possibilities, but it doesn’t have to be difficult. This chapter explains the kinds of components you can connect to make up your home theater system.
18 03 Connecting your equipment Determining the speakers’ application This unit is equipped with speaker terminals for 11 channels, allowing users to select a variety of speaker layouts/ usage patterns according to their tastes. The terminals to which the speakers should be connected differ accord - ing to the speaker layout/usage pattern.
19 03 Connecting your equipment [D] 7.2 channel surround system (Surround back) & ZONE 2 connection (Multi Zone) ! Speaker System setting: 7.1ch + ZONE 2 With these connections you can simultaneously enjoy 7.2-channel surround sound in the main zone with stereo playback on another component in ZONE 2.
20 03 Connecting your equipment Placing the speakers Refer to the chart below for placement of the speakers you intend to connect. L SW 2S W 1 C FHL FWL SL SBL SBR SB SR FWR R FHR 30 30 60 60 60 120 120 ! Place the surround speakers at 120º from the center.
21 03 Connecting your equipment Bi-amping your speakers Bi-amping is when you connect the high frequency driver and low frequency driver of your speakers to different amplifiers for better crossover performance.
22 03 Connecting your equipment Installing your speaker system At the very least, front left and right speakers only are necessary. Note that your main surround speakers should always be connected as a pair, but you can connect just one surround back speaker if you like (it must be con - nected to the left surround back terminal).
23 03 Connecting your equipment [C] 7.2 channel surround system & Front Bi-amping connection (High quality surround) ! Select ‘ 7.1ch Front Bi-Amp ’ from the Speaker System menu. See Speaker system setting on page 90 to do this. ! When only connecting one surround back speaker, connect it to the SURROUND BACK L (Single) terminals.
24 03 Connecting your equipment [E] 7.2 channel surround system (Front height/Front wide) & ZONE 2 connection (Multi Zone) ! Select ‘ 7.1ch FH/FW + ZONE 2 ’ from the Speaker System menu.
25 03 Connecting your equipment [G] 5.2 channel surround system & ZONE 2/ZONE 3 connection (Multi Zone) ! Select ‘ 5.1ch + ZONE 2+3 ’ from the Speaker System menu.
26 03 Connecting your equipment About the video converter The video converter ensures that all video sources are output through the HDMI OUT terminal. If the TV is only connected to the receiver’s composite VIDEO MONITOR OUT jacks, all the other video devices must be connected through composite connections.
27 03 Connecting your equipment Connecting your TV and playback components Connecting using HDMI If you have an HDMI or DVI (with HDCP) equipped component (Blu-ray Disc player (BD), etc.), you can connect it to this receiver using a commercially available HDMI cable.
28 03 Connecting your equipment Connecting your DVD player with no HDMI output This diagram shows connections of a TV (with HDMI input) and DVD player (or other playback component with no HDMI output) to the receiver. HDMI BD IN LA N ( 10/10 0 ) OUT 2O UT 1 DC OUTPUT fo r WIRELESS LA N ( OUTPUT 5 V 0.
29 03 Connecting your equipment ! In order to listening to HD audio with this receiver, connect an HDMI cable, and use analog video cable for video signal input. Depending on the player, it may not be possible to output video signals to both HDMI and other video output (composite, etc.
30 03 Connecting your equipment ! If your HDD/DVD recorder, BD recorder, etc., is equipped with an HDMI output terminal, we recommend con - necting it to the receiver’s HDMI DVR/BDR IN terminal. When doing so, also connect the receiver and TV by HDMI (see Connecting using HDMI on page 27 ).
31 03 Connecting your equipment ! Even if your set-top box is equipped with an HDMI output terminal, in some cases the sound is output from the digital audio output (optical or coaxial) and only the video is output from the HDMI output terminal. In this case, make the HDMI and digital audio connections as shown below.
32 03 Connecting your equipment Connecting additional amplifiers This receiver has more than enough power for any home use, but it’s possible to add additional amplifiers to every channel of your system using the pre-outs. Make the connections shown below to add amplifiers to power your speakers.
33 03 Connecting your equipment Connecting external antennas To improve FM reception, connect an external FM antenna to FM UNBAL 75 W . ANTENNA AM LOOP FM UN BA L 75 ANTENNA AM LOO P FM UNB AL 75 75 .
34 03 Connecting your equipment 3 Connect a TV monitor to the VIDEO ZONE 2 OUT jack on this receiver. ZONE 2 OUT SUBWOOFER ZONE 2 OUT SUBW OOFER RL AU DIO IN LINE LEVEL INPUT VIDEO IN Sub zone ( ZONE .
35 03 Connecting your equipment Secondary MULTI-ZONE setup (ZONE 3) % Connect a separate amplifier to the AUDIO ZONE 3 OUT jacks on this receiver. You should have a pair of speakers attached to the sub zone amplifier as shown in the following illustration.
36 03 Connecting your equipment Connecting optional Bluetooth ADAPTER When the Bluetooth ® ADAPTER (AS-BT100 or AS-BT200) is connected to this receiver, a product equipped with Bluetooth wireless technology (portable cell phone, digital music player, etc.
37 03 Connecting your equipment Connecting an MHL-compatible device An MHL-compatible mobile device can be connected to enjoy full-HD videos, high quality multi-channel audio, and photos etc., with charge the battery on the receiver. Use the MHL cable included with the receiver to connect the device.
38 03 Connecting your equipment 1 Connect the IR receiver sensor to the IR IN jack on the rear of this receiver. OUT IN 1 IN 2 IR OUT IN 1 IN 2 IR IN IR Closet or shelving unit Non- Pi oneer component IR receiver 2 Connect the IR IN jack of another component to the IR OUT jack on the rear of this receiver to link it to the IR receiver.
39 Changing the OSD display language (OSD Language) ............................................................... 40 Automatically conducting optimum sound tuning (Full Auto MCACC) .................................... 40 The Input Setup menu .......
40 04 Basic Setup Changing the OSD display language (OSD Language) The language used on the Graphical User Interface screen can be changed. ! The explanations in these operating instructions are for when English is selected for the GUI screen.
41 04 Basic Setup Install the microphone on a stable floor. Placing the microphone on any of the following surfaces may make accurate measurement impossible: ! Sofas or other soft surfaces. ! High places such as tabletops and sofa tops. The Full Auto MCACC display appears once the microphone is connected.
42 04 Basic Setup The Input Setup menu You only need to make settings in the Input Setup menu if you didn’t hook up your digital equipment according to the default settings (see Input function default and possible settings on page 42 ).
43 04 Basic Setup Operation Mode Setup This receiver is equipped with a great number of functions and settings. The Operation Mode feature is provided for users who find it difficult to master all these functions and settings. One of two settings can be selected for the Operation Mode : Expert and Basic .
44 Playing a source ............................................................................................................................. 45 Playing an iPod ......................................................................................
45 05 Basic playback Playing a source Here are the basic instructions for playing a source (such as a DVD disc) with your home theater system. INPUT SELECT iPod USB CBL SA TM HL TUNE R ADPT CD TV RECEIVER BDR BD DV DD VR NET HDMI VO LUME RECEIVE R AU TO /ALC / DIRECT RECEIVER 1 1 Switch on your system components and receiver.
46 05 Basic playback Playing an iPod This receiver has the iPod iPhone iPad USB terminal that will allow you to control playback of audio content from your iPod using the controls of this receiver. Here we describe the procedure for playback on an iPod.
47 05 Basic playback Playing a USB device It is possible to play files using the USB interface on the front of this receiver. ! Compatible USB devices include external magnetic hard drives, portable flash memory drives (particularly key drives) and digital audio players (MP3 players) of format FAT16/32.
48 05 Basic playback About playable file formats The USB function of this receiver supports the following file formats. Note that some file formats are not available for playback although they are listed as playable file formats. Music files Category Extension Stream MP3 <a> .
49 05 Basic playback Listening to the radio The following steps show you how to tune in to FM and AM radio broadcasts using the automatic (search) and manual (step) tuning functions. If you already know the frequency of the station you want, see Tuning directly to a station below.
50 05 Basic playback Searching for RDS programs One of the most useful features of RDS is the ability to search for a particular kind of radio program. You can search for any of the program types listed above. 1 Press TUNER to select the FM band. ! RDS is only possible in the FM band.
51 05 Basic playback ! If the Bluetooth wireless technology device’s security code is “0000”, there is no need to make the security code setting on the receiver. Press ADPT to set the ADAPTER PORT input, then conduct the pairing operation on the Bluetooth wireless technology device.
52 Enjoying various types of playback using the listening modes ................................................ 53 Selecting MCACC presets .............................................................................................................. 55 Choosing the input signal .
53 06 Listening to your system Enjoying various types of playback using the listening modes Using this receiver, you can listen to any source in surround sound. However, the options available will depend on your speaker setup and the type of source you’re listening to.
54 06 Listening to your system Using the Home THX modes THX and Home THX are technical standards created by THX Ltd. for cinema and home theater sound.
55 06 Listening to your system Using Stream Direct Use the Stream Direct modes when you want to hear the truest possible reproduction of a source. All unneces - sary signal processing is bypassed, and you’re left with the pure analog or digital sound source.
56 06 Listening to your system Better sound using Phase Control This receiver’s Phase Control feature uses phase correction measures to make sure your sound source arrives at the listening position in phase, preventing unwanted distortion and/or coloring of the sound.
57 Introduction ................................................................................................................................... 58 Playback with Network functions ....................................................................
58 07 Playback with NETWORK features Introduction This receiver is equipped with the LAN terminal and you can enjoy the following features by connecting your components to these terminals.
59 07 Playback with NETWORK features Playback with Network functions Important ! About one minute is required between turning the power on and completion of startup. ! When you play back audio files, ‘ Connecting... ’ is displayed before playback starts.
60 07 Playback with NETWORK features 4 Access the special Pioneer Internet radio site from your computer and perform the registration process. http://www.radio-pioneer.com Access the above site and use the access code in step 3 to perform user registration, following the instructions on the screen.
61 07 Playback with NETWORK features Pioneer is not responsible for any malfunction of the player and/or the NETWORK features due to communica - tion error/malfunctions associated with your network connection and/or your PC, or other connected equipment.
62 About the Control with HDMI function ....................................................................................... 63 Making Control with HDMI connections ...................................................................................
63 08 Control with HDMI function About the Control with HDMI function Synchronized operations below with a Control with HDMI-compatible Pioneer TV or Blu-ray Disc player are pos - sible when the component is connected to the receiver using an HDMI cable.
64 08 Control with HDMI function Before using synchronization Once you have finished all connections and settings, you must: 1 Put all components into standby mode. 2 Turn the power on for all components, with the power for the TV being turned on last.
65 08 Control with HDMI function Cautions on the Control with HDMI function ! Connect the TV directly to this receiver. Interrupting a direct connection with other amps or an AV converter (such as an HDMI switch) can cause operational errors. ! Only connect components (Blu-ray Disc player, etc.
66 Setting the Audio options ............................................................................................................ 67 Setting the Video options ....................................................................................
67 09 Using other functions Setting the Audio options There are a number of additional sound settings you can make using the AUDIO PARAMETER menu. The defaults, if not stated, are listed in bold.
68 09 Using other functions Setting What it does Option(s) LFE (LFE Attenuate) Some audio sources include ultra-low bass tones. Set the LFE attenu - ator as necessary to prevent the ultra-low bass tones from distorting the sound from the speakers. The LFE is not limited when set to 0 dB, which is the recommended value.
69 09 Using other functions l ! You can’t use the Virtual Wide mode when the headphones are connected to this receiver or when any of the stereo, Front Stage Surround Advance, Sound Retriever Air or Stream Direct modes is selected. ! You can only use the Virtual Wide mode if the surround speakers are on and the FW setting is set to NO .
70 09 Using other functions Setting What it does Option(s) V.ADJ (Advanced Video Adjust) Sets the optimum picture quality for the type of monitor that is con - nected. Select PDP for plasma displays, LCD for liquid crystal moni - tors, FPJ for front projectors, PRO for professional monitors.
71 09 Using other functions Setting What it does Option(s) ASP (Aspect) <g> Specifies the aspect ratio when input signals are output at the HDMI output. Make your desired settings while checking each setting on your display (if the image doesn’t match your monitor type, cropping or black bands appear).
72 09 Using other functions Using the MULTI-ZONE controls The following steps use the front panel controls to adjust the sub zone volume and select sources.
73 09 Using other functions Using the sleep timer The sleep timer switches the receiver into standby after a specified amount of time so you can fall asleep without worrying about the receiver being left on all night. Use the remote control to set the sleep timer.
74 09 Using other functions Setting Default Phase Control ON Auto Sound Retriever iPod/USB, INTERNET RADIO, MEDIA SERVER, FAVORITES, ADAPTER PORT input function ON Other input functions OFF Sound Delay 0.
75 About the Remote Setup menu .................................................................................................... 76 Operating multiple receivers .......................................................................................
76 10 Controlling the rest of your system About the Remote Setup menu The Remote Setup mode is set by pressing the number button while pressing RCU SETUP . The different items on the Remote Setup menu are described below. For their setting procedures, refer to the explanations for the respective items.
77 10 Controlling the rest of your system 4 Repeat steps 2 through 3 for the other components you want to control. To try out the remote control, switch the component on or off (into standby) by pressing u SOURCE . If it doesn’t seem to work, select the next code from the list (if there is one).
78 10 Controlling the rest of your system Direct function ! Default setting: On You can use the direct function feature to control one component using the remote control while at the same time, using your receiver to playback a different component.
79 10 Controlling the rest of your system Controlling components This remote control can control components after entering the proper codes (see Setting the remote to control other components on page 76 for more on this). Use the input function buttons to select the component.
80 10 Controlling the rest of your system Audio/Video components Button(s) LD CD/CD-R/SACD MD/DAT TAPE u SOURCE POWER ON/OFF POWER ON/OFF POWER ON/OFF POWER ON/OFF Number buttons numerics numerics num.
81 Making receiver settings from the Advanced MCACC menu .................................................... 82 Automatic MCACC (Expert) ........................................................................................................... 82 Manual MCACC setup .
82 11 The Advanced MCACC menu Making receiver settings from the Advanced MCACC menu The Advanced MCACC (Multi Channel ACoustic Calibration) system was developed in Pioneer’s laboratories with the aim of making it possible for home users to perform adjustments of the same level as in a studio easily and with high precision.
83 11 The Advanced MCACC menu PHONES SPEAKERS MU LT I- ZO NE CO NTROL ON/OFF MCACC SETUP MIC TUNER EDIT USB iPod iPhone iPad AU TO SURR/A LC / STREAM DIREC T ST ANDAR D SURROUND AD VA NCED SURROUND iP od iPhone iP ad DIRECT CO NTRO L BAND 5V 2.
84 11 The Advanced MCACC menu Manual MCACC setup You can use the settings in the Manual MCACC setup menu to make detailed adjustments when you’re more familiar with the system. Before making these settings, you should have already completed Automatically con - ducting optimum sound tuning (Full Auto MCACC) on page 40 .
85 11 The Advanced MCACC menu Standing Wave ! Default setting: ON / ATT 0.0dB (all filters) Acoustic standing waves occur when, under certain conditions, sound waves from your speaker system resonate mutually with sound waves reflected off the walls in your listening area.
86 11 The Advanced MCACC menu 3 If you selected ‘Reverb Measurement’, select EQ ON or EQ OFF, and then START. The following options determine how the reverb characteristics of your listening area .
87 11 The Advanced MCACC menu Speaker Distance Use this to display the distance from the different channels to the listening position. See Speaker Distance on page 91 for more on this. 1 Select ‘Speaker Distance’ from the MCACC Data Check menu. 2 When ‘MCACC’ is highlighted, use k / l to select the MCACC preset you want to check.
88 11 The Advanced MCACC menu 4 Select ‘OK’ to confirm and copy the settings. When MCACC Memory Copy? is displayed, select YES . If NO is selected, the memory is not copied. Completed! shows in the GUI screen to confirm the MCACC preset has been copied, then you automatically return to the Data Management setup menu.
89 Making receiver settings from the System Setup menu ............................................................ 90 Manual speaker setup ...............................................................................................................
90 12 The System Setup and Other Setup menus Making receiver settings from the System Setup menu The following section describes how to change the speaker-related settings manually and make various other settings (input selection, OSD language selection, etc.
91 12 The System Setup and Other Setup menus 2 Choose the set of speakers that you want to set, then select a speaker size. Use k / l to select the size (and number) of each of the following speakers: ! Front – Select LARGE if your front speakers reproduce bass frequencies effectively, or if you didn’t connect a subwoofer.
92 12 The System Setup and Other Setup menus 2 Choose the X-Curve setting you want. Use k / l to adjust the setting. The X-Curve is expressed as a downwards slope in decibels per octave, starting at 2 kHz. The sound becomes less bright as the slope increases (to a maximum of –3.
93 12 The System Setup and Other Setup menus Proxy Hostname / Proxy Port This setting is required when you connect this receiver to the Internet via a proxy server. Enter the IP address of your proxy server in the ‘ Proxy Hostname ’ field. Also, enter the port number of your proxy server in the ‘ Proxy Port ’ field.
94 12 The System Setup and Other Setup menus The Other Setup menu The Other Setup menu is where you can make customized settings to reflect how you are using the receiver. 1 Press on the remote control, then press HOME MENU. A Graphical User Interface (GUI) screen appears on your TV.
95 12 The System Setup and Other Setup menus ! If an update file is provided on the Pioneer website, download it onto your computer. When downloading an update file from the Pioneer website onto your computer, the file will be in ZIP format. Unzip the ZIP file before saving it on the USB memory device.
96 12 The System Setup and Other Setup menus The low frequency component output from the AUDIO ZONE 2 OUT terminals is cut. When a subwoofer is con - nected in Zone 2, we recommend setting this to “ ON ”. This is only valid when Zone 2 is connected using the AUDIO ZONE 2 OUT terminals.
97 Troubleshooting ............................................................................................................................ 98 Power ..................................................................................................
98 13 FAQ Troubleshooting Incorrect operations are often mistaken for trouble and malfunctions. If you think that there is something wrong with this component, check the points below. Sometimes the trouble may lie in another component. Investigate the other components and electrical appliances being used.
99 13 FAQ Symptom Remedy No sound from subwoofer. Check that the subwoofer is connected properly, switched on and the volume turned up. If your subwoofer has a sleep function, make sure it is switched off. Make sure that the Subwoofer setting is YES or PLUS (see Speaker Setting on page 90 ).
100 13 FAQ ADAPTER PORT terminal Symptom Remedy The Bluetooth wireless technology device cannot be connected or oper - ated. Sound from the Bluetooth wire - less technology device is not emitted or the sound is interrupted. Check that no object that emits electromagnetic waves in the 2.
101 13 FAQ Symptom Remedy The various system settings are not stored. Do not pull out the power cord while conducting the settings. (The settings will be stored when both the main zone and sub zone turn off. Turn off all zones before pulling out the power cord.
102 13 FAQ Symptom Remedy No picture or sound. This receiver is HDCP-compatible. Check that the components you are connecting are also HDCP-compatible.
103 13 FAQ USB interface Symptoms Causes Remedies The folders/files stored on a USB memory device are not displayed. The folders/files are currently stored in a region other than the FAT (File Allocation Table) region. Store the folders/files in the FAT region.
104 13 FAQ Symptoms Causes Remedies Audio playback is undesir - ably stopped or disturbed. The audio file currently being played back was not recorded in a format playable on this receiver. Check whether the audio file was recorded in a format sup - ported by this receiver.
105 13 FAQ Wireless LAN Network cannot be accessed via wireless LAN. Wireless LAN converter’s power is not on. (Wireless LAN converter’s “Power”, “WPS” and “Wireless” indica - tors are not all lit.
106 Surround sound formats ............................................................................................................. 107 About THX ....................................................................................................
107 14 Additional information Surround sound formats Below is a brief description of the main surround sound formats you’ll find on BDs, DVDs, satellite, cable and terrestrial broadcasts, and video cassettes. Dolby The Dolby technologies are explained below.
108 14 Additional information THX Select2 Plus Before any home theatre component can be THX Select2 Plus certified, it must incorporate all the features above and also pass a rigorous series of quality and performance tests.
109 14 Additional information Windows 7 Windows and the Windows logo are trademarks of the Microsoft group of companies. MHL MHL, the MHL Logo, and Mobile High-Definition Link are trademarks or registered trademarks of MHL LLC in the United States and other countries.
110 14 Additional information Speaker Setting Guide In order to achieve an even better surround effect, it is important to accurately position the speakers and make their volume and tone characteristics uniform so as to finely focus the multi-channel sound.
111 14 Additional information About messages displayed when using network functions Refer to the following information when you come up with a status message while operating the Network functions. Status messages Descriptions Connection Down The selected category or Internet radio station cannot be accessed.
112 14 Additional information Precautions when using the Wireless LAN converter (AS-WL300) Precautions regarding wavelength ! This wireless LAN converter is designed to prevent other persons from eave.
113 14 Additional information Declaration of Conformity with regard to the R&TTE Directive 1999/5/EC Indoor Use Only Utiliser à l’intérieur seulement Manufacture r: PIONEER CORPORA TION 1-1, S.
114 14 Additional information Glossary Audio formats/Decoding Dolby The Dolby technologies are explained below. See http://www.dolby.com for more detailed information. Dolby Digital Dolby Digital is a multichannel digital audio coding system widely used in cinemas, and in the home for DVD and digital broadcast soundtracks.
115 14 Additional information Auto Sound Retriever The Auto Sound Retriever feature employs DSP technology to restore sound pressure and smooth jagged arti - facts left over after compression.
116 14 Additional information Wireless LAN/Wi-Fi “Wi-Fi” (Wireless Fidelity) is a trademark coined by the Wi-Fi Alliance trade association to increase recognition of wireless LAN standards.
117 14 Additional information Features index Operation Mode See Operation Mode Setup on page 43 . AVNavigator See About using AVNavigator (included CD-ROM) on page 9 . Full Auto MCACC See Automatically conducting optimum sound tuning (Full Auto MCACC) on page 40 .
118 14 Additional information Specifications Amplifier section Multi channel simultaneous power output (1 kHz, 1 %, 8 W ) 9 ch total ......................................................................................................................
119 14 Additional information Preset code list You should have no problem controlling a component if you find the manufacturer in this list, but please note that there are cases where codes for the manufacturer in the list will not work for the model that you are using.
120 14 Additional information Naonis 0145 NEC 0147, 0229 Neckermann 0125, 0138, 0141, 0145, 0149, 0150, 0152, 0155, 0229 NEI 0149, 0152, 0155 Neufunk 0154, 0155 New Tech 0142, 0149, 0154, 0155, 0229 N.
121 14 Additional information BD If operations are not possible using the preset codes below, you may be able to conduct operations with the preset codes for the DVD , DVR (BDR, HDR) .
122 14 Additional information Satellite Set Top Box Pioneer 6220, 6219, 6204 @sat 6251 @Sky 6238 ABsat 6180 Acoustic Solutions 6217 ADB 6174 Akai 6214 Akura 6228 Alba 6176, 6200, 6180, 6217 Allsat 621.
123 14 Additional information Starland 6180 Starlite 6214 Stream 6212 Stream System 6251 Strong 6220, 6228, 6256, 6200, 6180, 6245, 6217, 6239 Sumin 6199 Sunny 6251 Sunsat 6180 Sunstar 6174, 6256 Supe.
© 2012 PIONEER CORPORA TION. All rights reser ved. <ARB7481-A> PIONEER CORPORA TION 1-1, Shin-ogura, Saiwai-ku, Ka wasaki-shi, Kanaga wa 212-0031, Japan PIONEER ELECTRONICS (USA) INC. P. O. BO X 1540, Long Beach, California 90801-1540, U. S.A. TEL: (800) 421-1404 PIONEER ELECTRONICS OF CANAD A, INC.
An important point after buying a device Pioneer SC-LX56 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Pioneer SC-LX56 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Pioneer SC-LX56 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Pioneer SC-LX56 you will learn all the available features of the product, as well as information on its operation. The information that you get Pioneer SC-LX56 will certainly help you make a decision on the purchase.
If you already are a holder of Pioneer SC-LX56, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Pioneer SC-LX56.
However, one of the most important roles played by the user manual is to help in solving problems with Pioneer SC-LX56. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Pioneer SC-LX56 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
