Instruction/ maintenance manual of the product PRS-D1000M Pioneer
Go to page of 8
Setting the Unit <ENGLISH> Thank you for purchasing this PIONEER product. Before attempting operation, be sure to read this manual. In case of trouble When the unit does not operate properly , contact your dealer or the nearest autho- rized PIONEER Service Station.
Connecting the Power T erminal •A lw ays use the special red battery and ground wire ([RD-223] and [RD-222]), which are sold separately . Connect the battery wire directly to the car battery positiv e terminal (+) and the ground wire to the car body .
Connecting the Unit <ENGLISH> Connecting the Speaker Wires Connect the speaker leads and set MODE SELECT switch and PO WER MODE switch to suit the configuration according to the figures sho wn below and the next page. •W hen synchronously connecting two or more amplifiers in combination, only use these amplif iers.
Specifications <ENGLISH> Power source ........................................................................................................ 14.4 V DC ( 10.8 V to 15.1 V allowable) Grounding system .............................................
Ajuste de esta unidad <ESP AÑOL> Antes de usar este producto <ESP AÑOL> Muchas gracias por la adquisición de este producto PIONEER. Antes de tratar de operarlo, lea atentamente este manual.
Conexión del terminal de alimentación • Siempre utilice el cable de batería rojo especial y los cables de tierra ([RD-223] y [RD-222]), vendi- dos separadamente. Conecte el cable de batería directamente al terminal positiv o de la batería del v ehículo (+) y el cable de tierra a la carrocería del v ehículo.
Conexión de la unidad <ESP AÑOL> Conexión de los cables de altavoces Conecte los hilos de altav oz y ajuste el interruptor MODE SELECT y el interruptor PO WER MODE de acuerdo con la configuración que se utilice ref iriéndose a las figuras que se muestran a continuación y en la página siguiente.
PRECAUCION • No lo instale en: — Donde podría lesionar al conductor o a los pasajeros si se detiene el vehículo brusca- mente. — Donde podría interferir con el conductor , como por ejemplo en el piso en frente al asiento del conductor .
An important point after buying a device Pioneer PRS-D1000M (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Pioneer PRS-D1000M yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Pioneer PRS-D1000M - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Pioneer PRS-D1000M you will learn all the available features of the product, as well as information on its operation. The information that you get Pioneer PRS-D1000M will certainly help you make a decision on the purchase.
If you already are a holder of Pioneer PRS-D1000M, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Pioneer PRS-D1000M.
However, one of the most important roles played by the user manual is to help in solving problems with Pioneer PRS-D1000M. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Pioneer PRS-D1000M along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
