Instruction/ maintenance manual of the product HTP-330 Pioneer
Go to page of 62
HTP-330 S-ST330 SX-SW330 Operating Instructions Audio Multi-channel Receiver Subwoofer Speaker System HTP-330.book 1 ページ ２００７年３月２７日 火曜日 午後６時８分.
D3-4-2-1-1_En-A The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
Contents 3 En English Contents 01 Speaker Setup Guide Safety precautions when setting up . . . . . . . . . . . . . . . 4 Home theater sound setup . . . . . . . . . . . . . . . . . . . . . 4 Front surround setup (recommended) . . . . . . . . . . . . 4 Standard surround setup .
Speaker Setup Guide 01 4 En Chapter 1 Speaker Setup Guide Safety precautions when setting up When assembling the speakers, lay them down flat on their side to avoid accidents or injury. Make sure to use a stable surface when assembling, setting up, and placing the speakers.
Speaker Setup Guide 01 5 En English 1 Attach the smaller non-skid pads to the base of each of the front, center and surround speakers. The four large non-skid pads are for the receiver subwoofer (as shown). Use the adhesive side of the pads to attach them to the base (flat surface) of each speaker.
Speaker Setup Guide 01 6 En Standard surround setup This is a standard multichannel surround sound speaker setup for optimal 5.1 channel home theater sound. The center speakers can be installed independently in the center if desired. 1 Attach the smaller non-skid pads to the base of each of the front, center and surround speakers.
Speaker Setup Guide 01 7 En English Wall mounting the speakers The front, center and surround speakers have a mounting hole which can be used to mount the speaker on the wall.
Connecting up 02 8 En Chapter 2 Connecting up Basic connections Important • When connecting this system or changing connections, be sure to switch power off and disconnect the power cord from the wall socket. After completing all connections, connect the power cord to the wall socket.
Connecting up 02 9 En English 1 Fasten the spacers to the display unit and connect. If the display unit is difficult to view, the spacers can be attached to allow changing of the viewing angle. Peel off the protective paper from the spacers and press the spacers onto the depressions on the bottom of the display unit.
Connecting up 02 10 En • Connect the other end to the color-coded speaker terminals on the rear of the receiver subwoofer. Make sure to insert completely. The small lug at the wire-end of the speaker plug should face up or down depending on whether it’s being plugged into one of the upper or lower speaker terminals.
Connecting up 02 11 En English • Do not connect the supplied speakers to any amplifier other than the one supplied with this system. Connection to any other amplifier may result in malfunction or fire. • The center speakers and front/surround speakers are designed with different impedance values.
Controls and displays 03 12 En Chapter 3 Controls and displays Display unit 1 STANDBY/ON Press to switch the system on/into standby. 2 Front panel display See below for details. 3 IR remote sensor (page 14) 4 AUDIO INPUT (page 23) Press repeatedly to select one of the external audio inputs ( DVD/DVR1 , DVD/DVR2 , DIGITAL or ANALOG ).
Controls and displays 03 13 En English Remote control 1 STANDBY/ON Press to switch the receiver subwoofer on or into standby. 2 MUTE Press to mute all audio from the speakers. Press again to cancel and restore the sound. 3 VOLUME +/– Use to adjust the volume.
Controls and displays 03 14 En Using the remote control Please keep in mind the following when using the remote control: • Make sure that there are no obstacles between the remote and the remote sensor on the unit. • Remote operation may become unreliable if strong sunlight or fluorescent light is shining on the unit’s remote sensor.
Getting started 04 15 En English Chapter 4 Getting started System demo setting Switches the automatic demo feature on or off (this starts when you plug in for the first time). 1S witch the system into standby. 2 Press SETUP . 3 Use the / (cursor left/right) buttons to select DEMO from the menu, then press ENTER .
Listening to your system 05 16 En Chapter 5 Listening to your system Auto listening mode The Auto listening mode is the simplest way to listen to any source as it was mastered: the output from the speakers mirrors the channels in the source material.
Listening to your system 05 17 En English Using Front Stage Surround Advance The Front Stage Surround Advance modes are effective when you are using the Front surround speaker setup as described on page 4. • Press F.S.SURR to select a Front Stage Surround Advance mode.
Listening to your system 05 18 En Listening with Acoustic Calibration EQ You can listen to sources using the Acoustic Calibration EQ set in Using the Auto MCACC setup for optimal surround sound on page 15. 1 Press SOUND . 2 Use the / (cursor left/right) buttons to select MCACC EQ then press ENTER .
Listening to the radio 06 19 En English Chapter 6 Listening to the radio Listening to the radio The tuner can receive both FM and AM broadcasts, and lets you memorize your favorite stations so you don’t have to manually tune in every time you want to listen.
Listening to the radio 06 20 En Changing the frequency step If you find that you can’t tune into stations successfully, the frequency step may not be suitable for your country/ region. 1S witch the system into standby. 2 Press SETUP . 3 Use the / (cursor left/right) buttons to select ‘AM 9K/10K’, then press ENTER .
Surround sound settings 07 21 En English Chapter 7 Surround sound settings Using the Setup menu From the Setup menu you can access all the surround sound settings of the system 1 , including channel levels, speaker distances, dynamic range adjustment and dual mono audio playback.
Surround sound settings 07 22 En 3 Use / (cursor up/down) to select a setting. Select one of the following: • DRC OFF (default) – No dynamic range adjustment (use when listening at higher vo.
Other connections 08 23 En English Chapter 8 Other connections Important • When connecting this system or changing connections, be sure to switch power off and disconnect the power cord from the wall socket. After completing all connections, connect the power cord to the wall socket.
Other connections 08 24 En Using this unit with a Pioneer plasma display If you have a Pioneer plasma display 1 , you can use an SR+ cable 2 to connect it to this unit and take advantage of various co.
Other connections 08 25 En English Automatic plasma display input switching In order that the plasma display can switch automatically to the correct input when you switch the input function of the receiver subwoofer, you need to tell it how your system is connected.
Additional information 09 26 En Chapter 9 Additional information Setting the sleep timer The sleep timer switches off the receiver subwoofer after a specified time so you can fall asleep without worrying about it. 1 1 Press the SLEEP button to select an option.
Additional information 09 27 En English Installation and maintenance Hints on installation We want you to enjoy using this system for years to come, so please bear in mind the following points when choosing a location: Do... Use in a well-ventilated room.
Additional information 09 28 En Preset code list Please note that there are cases where only certain functions may be controllable after assigning the proper preset code, or the codes for the manufacturer in the list will not work for the model that you are using.
Additional information 09 29 En English Troubleshooting Incorrect operations are often mistaken for trouble and malfunctions. If you think that there is something wrong with this component, check the points below. Sometimes the trouble may lie in another component.
Additional information 09 30 En Tuner Error Messages Glossary Manufactured under license from Dolby Laboratories. “Dolby”, “Pro Logic” and the double-D symbol are trademarks of Dolby Laboratories. “DTS” and “DTS Digital Surround” are registered trademarks of DTS, Inc.
Additional information 09 31 En English Specifications SX-SW330 Audio Multi-channal Receiver Subwoofer •A mplifier section RMS Power Output: Front, Center, Surround . . . . . . . . . . . . . 100 W per channel (1 kHz, 10 % T.H.D., 4 Ω ) Subwoofer .
D3-4-2-1-7c_A_ChH 5 cm 5 cm 5 cm HTP-330.book Page 2 Tuesday, March 27, 2007 2:32 PM.
目錄 3 ChH 中文 目錄 01 揚聲器設置指南 設置時應注意的安全措施 . . . . . . . . . . . . . . . . . . . . . . . 4 家庭劇院音效設置 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 前環繞設置 （建議使用） .
揚聲器設置指南 01 4 ChH 第 1 章 揚聲器設置指南 設置時應注意的安全措施 組裝揚聲器時 ， 請將揚聲器平放以免發生意外或受傷 。請 務必在平穩的表面.
揚聲器設置指南 01 5 ChH 中文 1 將較小的防滑墊黏貼於每個前置、 中置與環繞揚聲器 的底部。四片大型防滑墊用於接收重低音 （如圖示） 。 請使用防.
揚聲器設置指南 01 6 ChH 標準環繞設置 此為標準多聲道環繞音效揚聲器設置 ， 適用於 5.1 聲道的 家庭劇院音效。 中置揚聲器可以視需要單獨安裝在中央.
揚聲器設置指南 01 7 ChH 中文 將揚聲器固定於牆上 前置 、 中置和環繞揚聲器有固定孔 ，可用於將揚聲器固定 於牆上。 固定前 • 請記住，揚聲器系統.
接線 02 8 ChH 第 2 章 接線 基本連接 重要 • 對此系統進行接線或變更接線時，請務必關閉電源，並將電源線插頭自牆上電源插座上拔除。 完成所有接線.
接線 02 9 ChH 中文 1 固定顯示裝置的墊塊並連接。 如果很難看到顯示裝置的畫面 ，您可以安裝墊塊以變更觀 看角度。 撕下墊塊的防護紙，然後將墊塊按.
接線 02 10 ChH • 將另一端接 上 接收重低音後 方有顏色代碼 的 揚聲器 端子。請確定將電線完全插入。 揚聲器插頭電線端的小柄方向為朝上或朝下，需.
接線 02 11 ChH 中文 6 若有其他要連接的 DVD 播放器或影音來源 1 裝置 ， 請 先進行連接，稍後再插上電源。 關於連接數位來源裝置的方式，請參閱 第 23 .
控制與顯示 03 12 ChH 第 3 章 控制與顯示 顯示裝置 1 STANDBY/ON 按下可開啟系統電源或切換至待機狀態。 2 前面板顯示 詳情請參閱下圖。 3I R 遙控感應器.
控制與顯示 03 13 ChH 中文 遙控器 1 STANDBY/ON 按下可開啟接收重低音電源或切換至待機狀態。 2 MUTE 按下可使揚聲器所有音效靜音 。 再按一次便可取消.
控制與顯示 03 14 ChH 使用遙控器 使用遙控器時，請務必記住下列事項： • 請確定遙控器與裝置上的遙控感應器間無阻礙物。 • 若有強光或螢光燈照射.
開始操作 04 15 ChH 中文 第 4 章 開始操作 系統展示設定值 此 設定可切換 自動展示功 能 （此功 能 在第一次插 上電源 時會啟動） 。 1 將系統切換為待.
使用系統收聽音效 05 16 ChH 第 5 章 使用系統收聽音效 自動聆聽模式 自動聆聽模式是聆聽任何系統控制來源的最簡單方式 ：揚 聲器的輸出會反映出來源.
使用系統收聽音效 05 17 ChH 中文 使用前段環繞聲模式 如第 4 頁 所述使用前環繞揚聲器設置時，可以使用 「前段環繞聲」模式。 • 按下 F.S.SURR 以選擇前段環繞聲模式。 重複按下以選擇 FOCUS5.
使用系統收聽音效 05 18 ChH 使用 「音場補正等化」功能 您可以使用在第 15 頁的 使用自動 MCACC 設定以達最佳 環繞音效 中設定的 「音場補正等化」功能.
收聽廣播 06 19 ChH 中文 第 6 章 收聽廣播 收聽廣播 調諧器可接收 FM 與 AM 廣播 ， 並讓您能將最愛收聽的電 台記憶下來，如此便不需在每次收聽時進行手.
收聽廣播 06 20 ChH 改變頻率間隔 若發現無法調諧電台 ， 則本系統的頻率間隔可能不適用於 您所在的國家地區。 1 將系統切換為待機狀態。 2 按下 SETU.
環繞音效設定值 07 21 ChH 中文 第 7 章 環繞音效設定值 使用 「設定」選單 您可以從 「 設定 」 選單存取系統中所有環繞音效設定值 1 ， 包括聲道位準 .
環繞音效設定值 07 22 ChH 3 使用 / ( 上下游標 ) 選擇設定值。 請選擇以下其中一項設定值： • DRC OFF （預設） － 無動態範圍調整 （以高音量聆 .
其他接線 08 23 ChH 中文 第 8 章 其他接線 重要 • 對 此系統進行接線 或變更接線時，請務必關閉電 源， 並將電源線插頭自牆上電源插座上拔除。完成所.
其他接線 08 24 ChH 將此裝置連接先鋒電漿顯示器 若有先鋒電漿顯示器 1 ，可使用 SR+ 連接線 2 連接本裝置 ， 利用各種便利功能操控本裝置 ， 如電漿顯.
其他接線 08 25 ChH 中文 電漿顯示器自動輸入切換 使電漿顯示器能在您轉換成接收重低音的輸入功能時 ，自 動切換至正確的輸入源 ， 您需要讓顯示器感.
其他資訊 09 26 ChH 第 9 章 其他資訊 設定睡眠定時器 睡眠定時器經過特定時間後將會切斷接收重低音的電源 ， 您可放心入睡。 1 1 按下 SLEEP 按鍵選擇任.
其他資訊 09 27 ChH 中文 安裝與維護 安裝提示 我們希望您能夠在日後享受本系統所帶來的樂趣 ， 因此選 擇安裝地點時，請記住以下要點： 請 在通風.
其他資訊 09 28 ChH 預設代碼表 請注意，指定正確預設代碼後，可能只有特定功能可供控制，或者表中的製造商代碼無法用於您目前的機型。 製造商 代碼.
其他資訊 09 29 ChH 中文 故障排除 人們經常錯將不正確之操作當成系統故障或異常。如果您認為本機有任何異常之處，請按以下各點進行檢查 。有時可 .
其他資訊 09 30 ChH 調諧器 錯誤訊息 詞彙表 由 Dolby Laboratories 授權製造 。 「杜比」 、 「 Dolby 」、 「 Pro Logic 」 與雙 D 標誌是 Dolby Laboratories 的商標 。 "DTS" 和 "DTS Digital Surround" 為數碼影院系統公司 (DTS, Inc.
其他資訊 09 31 ChH 中文 規格 SX-SW330 音效多聲道接收重低音 • 擴大器部分 RMS 功率輸出： 前置、中置、環繞 . . . . . . . . . . . . . . . . . . . . . . 每聲道 100 W （ 1 kHz ， 10 % T.H.D. ， 4 Ω ） 重低音 .
<ARE7636-A> Pu blished by Pioneer Corporation. Copyright © 2007 Pioneer Corporation . All rights reserved. PIONEER CORPORATION 4-1, Meguro 1-Chome, Meguro-ku, Tokyo 153-8654, Japan PIONEER ELECTRONICS (USA) INC. P.O. BOX 1540, Long Beach, California 90801-1540, U.
An important point after buying a device Pioneer HTP-330 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Pioneer HTP-330 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Pioneer HTP-330 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Pioneer HTP-330 you will learn all the available features of the product, as well as information on its operation. The information that you get Pioneer HTP-330 will certainly help you make a decision on the purchase.
If you already are a holder of Pioneer HTP-330, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Pioneer HTP-330.
However, one of the most important roles played by the user manual is to help in solving problems with Pioneer HTP-330. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Pioneer HTP-330 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
