Instruction/ maintenance manual of the product DJM-400 Pioneer
Go to page of 16
Operating Instructions DJ MIXER DJM-400.
2 The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
3 Location Install the unit in a well-ventilated location where it will not be exposed to high temperatures or humidity. ÷ Do not install the unit in a location which is exposed to direct rays of the sun, or near stoves or radiators. Excessive heat can adversely affect the cabinet and internal components.
4 CONNECTIONS CONNECTION PANEL CONNECTIONS POWER OFF ON AC IN MASTER OUT MONO STEREO 2 1 L R L R LINE PHONO LINE PHONO MIC2 MIC1 AUX(R) AUX(L) AUX MIC CD CONTROL L R LINE PHONO LINE PHONO CD CONTROL SIGNAL GND 1 3 2 4 5 6 18 9 10 11 12 13 14 15 16 17 7 8 Rear panel Front panel 1.
5 CONNECTIONS CONNECTING INPUTS Pioneer DJ CD players Connect a DJ CD player ’ s audio output connectors to one of the channel 1 to 2 CD input connectors, and connect the player ’ s control cable to the corresponding channel ’ s CONTROL connector.
6 NAMES AND FUNCTIONS OF PARTS.
7 NAMES AND FUNCTIONS OF PARTS Beat effect section 15 BPM display Displays the current track tempo as Beats Per Minute (BPM). ¶ The display flashes during BPM calculation and when BPM cannot be calculated.
8 MIXER OPERATIONS (BASIC OPERATIONS) MIXER OPERATIONS BASIC OPERATIONS.
9 MIXER OPERATIONS (FADER START FUNCTION) FADER START FUNCTION By connecting the optional Pioneer DJ CD Player control cable, the channel fader and cross fader can be used to start CD playback.
10 EFFECT FUNCTIONS (TYPES OF BEAT EFFECTS) EFFECT FUNCTIONS This unit is equipped with a total of 8 basic effects using beat effects and in-loops linked to the BPM. By changing the parameters for each effect, a wide variety of new effects can be produced.
11 EFFECT FUNCTIONS (PRODUCING BEAT EFFECTS/IN-LOOP SAMPLER) PRODUCING BEAT EFFECTS Beat effects allow the instant setting of effect times in synch with the BPM (beats per minute), thus allowing the production of a wide variety of effects in synch with the current rhythm, even during live performances.
12 EFFECT FUNCTIONS (IN-LOOP SAMPLER/EFFECT PARAMETERS) 5. At the point you wish to sample record, press one of the non-lighted BEAT/BANK buttons. ¶ Lighted BEAT/BANK buttons have already been recorded, and cannot be used again unless their recorded contents are erased.
13 TROUBLESHOOTING TROUBLESHOOTING Incorrect operations are often mistaken for trouble and malfunctions. If you think there is something wrong with this component, check the points below . Sometimes the trouble may originate from another component. Thus, also check the other electrical appliances also in use.
14 SPECIFICATIONS 1.General Power source .............................................................. AC 120 V, 60 Hz Power consumption ..................................................................... 13 W Operating temperature ................
15 BLOCK DIAGRAM BLOCK DIAGRAM PHONO /LINE CD DSP DSP CPU [CH-1] RIAA PHONO ADC PHONO1/LINE1 LINE CH-1 Master out H.P out CH-2 MIC 1 MIC 2 CD1 TRIM DAC MUTE DAC MUTE PHONO /LINE MASTER OUT 1 MASTER OU.
Published by Pioneer Corporation. Copyright © 2006 Pioneer Corporation. All rights reserved. PIONEER CORPORATION 4-1, Meguro 1-Chome, Meguro-ku, Tokyo 153-8654, Japan PIONEER ELECTRONICS (USA) INC. Multimedia and Mass Storage Division: 2265 East 220th Street, Long Beach, CA 90810, U.
An important point after buying a device Pioneer DJM-400 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Pioneer DJM-400 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Pioneer DJM-400 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Pioneer DJM-400 you will learn all the available features of the product, as well as information on its operation. The information that you get Pioneer DJM-400 will certainly help you make a decision on the purchase.
If you already are a holder of Pioneer DJM-400, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Pioneer DJM-400.
However, one of the most important roles played by the user manual is to help in solving problems with Pioneer DJM-400. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Pioneer DJM-400 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
