Instruction/ maintenance manual of the product AVIC-N3 Pioneer
Go to page of 61
ENG/MASTER COVER 98 INST A VIC-N3 This product conforms to CEMA cord colors. Le code de couleur des câbles utilisé pour ce produit est conforme à CEMA.
1 IMPOR T ANT INFORMA TION ABOUT YOUR NEW NA VIGA TION SYSTEM AND THIS MANUAL • The navigation features of this product (and rear view camera option if pur- chased) is intended solely as an aid to you in the operation of your vehicle. It is not a substitute for your attentiveness, judgment and care when driving.
<CRD4069A/U> 3 English Español Deutsch Français Italiano Nederlands IMPORTANT INFORMATION .................... 1 ABOUT YOUR NEW NAVIGATION SYSTEM AND THIS MANUAL .............. 1 IMPORTANT SAFEGUARDS .................... 3 PLEASE READ ALL OF THESE INSTRUCTIONS REGARDING YOUR NAVIGATION SYSTEM AND RETAIN THEM FOR FUTURE REFERENCE .
<CRD4069A/U> 4 ENG/MASTER 96 IMPOR T ANT SAFEGU ARDS 3 PLEASE READ ALL OF THESE INSTRUCTIONS REGARDING YOUR NA VIGA TION SYSTEM AND RET AIN THEM FOR FUTURE REFERENCE 1. Read this manual fully and carefully before installing your navigation system.
<CRD4069A/U> 5 English Español Deutsch Français Italiano Nederlands 4 ENG/MASTER 96 Connecting the System • Pioneer does not recommend that you install your navigation system yourself.
5 Connecting the System Before installing this product • This product is for vehicles with a 12-volt battery and negative grounding. Check the battery voltage of your vehicle before installation. T o prevent damage • When disconnecting a connector, pull the connector itself.
<CRD4069A/U> 7 English Español Deutsch Français Italiano Nederlands 6 ENG/MASTER 96 • Never connect speakers with an output rating of less than 50 W channel or impedance outside of the 4 ohms to 8 ohms specifications to your navigation system.
<CRD4069A/U> 8 7 Connecting the System ENG/MASTER 96 Connecting the system Multi-CD player Y ellow Hide-a way unit Light gray Blue Blue A V -BUS cable (supplied with TV tuner) Extension antenna cable (supplied) 3 m (9 ft. 10 in.) 5 m (16 ft. 5 in.
8 ENG/MASTER 96 English Español Deutsch Français Italiano Nederlands <CRD4069A/U> 9 IP-BUS cable (supplied with iPod adapter) Y ellow DIGIT AL OUT This is used when connecting to the Pioneer multi-channel processor (sold separately), that is compatible with this product.
9 Connecting the System ENG/MASTER 96 <CRD4069A/U> 10 Connecting the power cord (1) Fuse (10 A) Y ellow T o terminal always supplied with power re gardless of ignition switch position. Red T o electric terminal controlled by ignition switch (12 V DC) ON/OFF .
<CRD4069A/U> 11 10 ENG/MASTER 96 English Español Deutsch Français Italiano Nederlands GUIDE ON SYSTEM REMOTE CONTROL Blue To Auto-antenna relay control terminal. If the vehicle has a glass antenna, connect to the antenna booster power supply terminal (max.
Pink (CAR SPEED SIGNAL INPUT) The mobile navigation system is connected here to detect the distance the vehicle tra vels. Always connect the v ehicle ’ s speed detection circuit or the ND-PG1 speed pulse generator , sold separately . Failure to make this connection will increase errors in the location display .
<CRD4069A/U> 13 Be sure to use only the supplied extension lead. Use of another lead could cause fir e, smoke and/or damage this product. 12 ENG/MASTER 96 English Español Deutsch Français Italiano Nederlands Note: Cords for this product and those for other products may be different colors even if they have the same function.
<CRD4069A/U> 14 13 Connecting the System ENG/MASTER 96 When connecting to separately sold power amp Display unit Front output (FR ONT OUTPUT) Subwoofer output or non-fading output (SUBWOOFER OUTPUT or NON-F ADING OUTPUT) Rear output (REAR OUTPUT) 15 cm (5 – 7/8 in.
14 ENG/MASTER 96 English Español Deutsch Français Italiano Nederlands <CRD4069A/U> 15 Power amp (sold separately) Power amp (sold separately) Power amp (sold separately) + ≠ + ≠ + ≠ + .
<CRD4069A/U> 16 When connecting a Rear view camera When using this product with a rear view camera, automatic switching to video from a rear view camera is possible when the gear shift is moved to REVERSE (R) position. Rear view mode also allows you to check what is behind you while driving.
When connecting the external video component and the display • It is necessary to set to “ A V INPUT ” or “ REAR DISP ” in “ SET UP ” when connecting the external video component.
17 Installation • Pioneer does not recommend that you install or service your navigation sys- tem yourself. Installing or servicing the product may expose you to risk of electric shock or other hazards. Refer all installation and servicing of your navigation system to authorized Pioneer service personnel.
• Install the display unit between the driver ’ s seat and front passenger seat so that it will not be hit by the driver or passenger if the vehicle stops quickly. • Never install the display unit in front of or next to the place in the dash, door, or pillar from which one of your vehicle ’ s airbags would deploy.
19 Installation Installing the display unit and Hide-away unit Installation notes • Do not install the display unit or Hide-away unit in places where it may become subject to high temperatures or humidity, such as: * Places close to a heater, vent or air conditioner.
• The cords must not cover up the area shown in the figure below. This is necessary to allow the amplifiers and navigation mechanism to heat dissipate freely. • The semiconductor laser will be damaged if it overheats, so don ’ t install the product anywhere hot — for instance, near a heater outlet.
<CRD4069A/U> 22 Parts supplied 21 Installation ENG/MASTER 96 Holder Side bracket (2 pcs.) Screw Display unit Rubber bushing Binding screw (5 × 6 mm) (4 pcs.) Flush surface screw (5 × 6 mm) (4 pcs.) Frame Screw (4 × 3 mm) (4 pcs.) Fixing screw (2 pcs.
• Install with the left and right sides of the Hide-away unit perpendicular or par- allel to your vehicle ’ s direction of travel. Do not install diagonally to your vehi- cle ’ s direction of travel or the current location will be displayed incorrectly.
23 Installation ENG/MASTER 96 <CRD4069A/U> 24 When the Hide-away unit is installed under the passenger seat, etc., use the installation board. 2. Decide on the installation position, and drill the holes. 3. Secure it f irmly using the self-tapping screws.
DIN Front /Rear -mount The display unit can be properly installed either from “ Front ” (conven- tional DIN Front-mount) or “ Rear ” (DIN Rear-mount installation, using threaded screw holes at the sides of the unit chassis). For details, refer to the following illustrated installation meth- ods.
25 Installation ENG/MASTER 96 <CRD4069A/U> 26 DIN Rear -mount Installation using the screw holes on the side of the display unit • Fastening the display unit to the factory radio-mounting bracket.
Installing the GPS antenna • Do not cut the GPS antenna lead to shorten it or use an extension to make it longer. Altering the antenna cable could result in a short circuit or malfunc- tion and permanent damage to the product.
27 Installation Parts supplied When installing the antenna inside the vehicle (on the rear shelf) Affix the metal sheet on as level a surface as possible where the GPS antenna faces the window. Place the GPS antenna on the metal sheet. (The GPS antenna is fastened with its magnet.
When installing the antenna outside the vehicle (on the body) Put the GPS antenna in a position as level as possible, such as on the roof or trunk lid. (The GPS antenna is fastened with a magnet.) Clamps Use clamps to secure the lead where necessary inside the vehicle.
29 After Installing this Product 1. Reconnecting the battery. First, double-check that all connections are correct and that this product is installed cor- rectly. Reassemble all vehicle components that you previously removed. Then reconnect the negative ( – ) cable to the negative ( – ) terminal of the battery.
<CRD4069A/U> 31 30 ENG/MASTER 96 English Español Deutsch Français Italiano Nederlands CRD4069-A_U_inst_001_031_US 10/25/05 10:58 Page 31.
1 INFORMA TION IMPOR T ANTE A PROPOS DE VOTRE NOUVEAU SYSTEME DE NA VIGA TION ET DE CE MANUEL • La fonction de navigation de ce produit (et la caméra de rétrovisée en option le cas échéant) est uniquement destinée à vous assister lors de la conduite de votre véhicule.
<CRD4069A/U> 33 English Français Deutsch Français Italiano Nederlands INFORMATION IMPORTANTE ................ 1 A PROPOS DE VOTRE NOUVEAU SYSTEME DE NAVIGATION ET DE CE MANUEL .................................... 1 IMPORTANTES MESURES DE SECURITE .
<CRD4069A/U> 34 ENG/MASTER 96 IMPOR T ANTES MESURES DE SECURITE 3 VEUILLEZ LIRE TOUTES LES EXPLICA TIONS RELA TIVES A VOTRE SYSTEME DE NA VIGA TION ET LES CONSERVER POUR VOUS Y REFERER EVENTUELLEMENT P AR LA SUITE 1. Lisez attentivement le contenu du présent manuel avant d’installer votre système de navigation.
<CRD4069A/U> 35 English Français Deutsch Français Italiano Nederlands 4 ENG/MASTER 96 Branchement du système • Pioneer vous déconseille d’installer vous-mêre votre système de navigation.
5 Branchement du système Avant de raccorder ce produit • Ce produit est destiné aux véhicules avec une batterie de 12 V, avec pôle négatif à la masse.
<CRD4069A/U> 37 English Français Deutsch Français Italiano Nederlands 6 ENG/MASTER 96 • Ne raccordez jamais les haut-parleurs à un canal d’une puissance de sortie inférieure à 50 W ou d’une impédance non comprise dans la plage de 4 à 8 ohms caractéristique de votre système de navigation.
<CRD4069A/U> 38 7 Branchement du système ENG/MASTER 96 Branchement du système Lecteur de CD à chargeur (vendu s é par é ment) Port de connecteur dock Connecteur dock (fourni avec adaptateur iPod) iPod avec connecteur dock Adaptateur iPod (par ex.
8 ENG/MASTER 96 English Français Deutsch Français Italiano Nederlands <CRD4069A/U> 39 *1 C â ble XM D A T A (fourni av ec le tuner XM) • Quand on combine ce c â ble a vec le GEX- P10XMT (vendu s é par é ment), cette connexion est n é cessaire.
9 Branchement du système ENG/MASTER 96 <CRD4069A/U> 40 Branchement du cordon d’alimentation (1) Fusible (10 A) Jaune A la borne toujours sous tension, quelle que soit la position du contacteur d ’ allumage. Rouge A la borne é lectrique, contr ô l é e par la position ON/OFF du contacteur d ’ allumage (12 V c.
10 ENG/MASTER 96 English Français Deutsch Français Italiano Nederlands <CRD4069A/U> 41 GUIDE ON SYSTEM REMOTE CONTROL Bleu Jaune/noir Si vous utilisez un appareil poss é dant une fonction de mise en sourdine (t é l é phone portable p. ex.), connectez le fil de mise en sourdine audio de cet appareil.
<CRD4069A/U> 42 V d Rose (CAR SPEED SIGNAL INPUT) Le syst è me de navigation est raccord é ici af in de d é tecter la distance parcourue par le v é hicule. Raccordez toujours le circuit de d é tection de vitesse du v é hicule ou le g é n é rateur d ’ impulsions de vitesse ND- PG1, vendu s é par é ment.
<CRD4069A/U> 43 V eillez à utiliser le cordon-rallonge four ni. L ’ utilisation d ’ un cordon diff é rent peut donner lieu à un incendie, à un é chauffement et/ou à un endommagement de ce produit.
<CRD4069A/U> 44 13 Branchement du système ENG/MASTER 96 Unit é d ’ affichage Sortie avant (FRONT OUTPUT) Sortie pour haut-parleur d ’ extr ê mes graves ou sortie sans att é nuation (SUBW.
14 ENG/MASTER 96 English Français Deutsch Français Italiano Nederlands <CRD4069A/U> 45 Amplificateur de puissance (vendu s é par é ment) Amplificateur de puissance (vendu s é par é ment) A.
15 Branchement du système Pour relier ce produit avec une cam é ra de r é trovis é e Lorsque ce produit est utilis é avec une cam é ra de r é trovis é e, cette derni è re peut passer automatiquement en vid é o lorsque le levier de vitesse est plac é en position REVERSE (R) .
Pour relier l ’ appareil vid é o externe et l ’ affichage •“ AV INPUT ” ou “ REAR DISP ” doit ê tre r é gl é en mode “ SET UP ” pour relier l ’ ap- pareil vid é o externe.
17 Installation • Pioneer d é conseille d ’ installer ou d ’ entretenir vous-m ê me votre syst è me de navigation car ces travaux comportent des risques d ’é lectrocution et d ’ autres dangers. Confiez l ’ installation et l ’ entretien à un personnel de ser- vice Pioneer qualifi é .
• N ’ installez pas l ’ unit é d ’ affichage ou l ’ unit é d é port é e à un endroit o ù elle risque (i) d ’ entraver la visibilit é du conducteur, (ii) de r é duire l ’ efficaci.
19 Installation Installation de l ’ unit é d ’ affichage et de l ’ unit é d é port é e Remarques sur l ’ installation • N ’ installez pas l ’ unit é d ’ affichage ou l ’ unit é.
• Les c â bles ne doivent pas traverser la zone indiqu é e dans la figure ci-dessous, afin que les amplificateurs et le m é canisme de navigation puissent transmettre librement.
<CRD4069A/U> 52 Pi è ces fournies 21 Installation ENG/MASTER 96 Support Support lat é ral (2 pi è ces) Vis Unit é d ’ affichage Bague en caoutchouc Vis de pression (5 × 6 mm) (4 pi è ces.
• Effectuez l ’ installation avec les c ô t é s gauche et droit de l ’ unit é d é port é e perpen- diculairement ou parall è lement au sens de d é placement du v é hicule.
23 Installation ENG/MASTER 96 <CRD4069A/U> 54 Lorsque l ’ unit é d é port é e est install é e sous le si è ge passager, etc., utilisez le panneau d ’ ins- tallation. 2. Choisissez la position d ’ installation, et percez les trous. 3. Assurez le maintien solidement à l ’ aide des vis auto-taraudeuses.
Montage DIN avant/arri è re Cette unit é d ’ affichage peut ê tre con- venablement install é e en choisissant soit la m é thode habituelle de montage par “ l ’ avant ” (montage DIN avant).
25 Installation ENG/MASTER 96 <CRD4069A/U> 56 Montage DIN arri è re Installation en utilisant les trous de vis sur les c ô t é s de unit é • Fixation de unit é au support pour le montage d ’ autoradio usine.
Installation de l ’ antenne GPS • Ne coupez pas le c â ble d ’ antenne GPS pour le raccourcir et n ’ utilisez pas d ’ extension pour le rallonger. Le fait d ’ intervenir sur le c â ble d ’ antenne risque d ’ entra î ner un court-circuit ou un dysfonctionnement et d ’ endom- mager d é finitivement le produit.
27 Installation Pi è ces fournies Installation de l ’ antenne dans le v é hicule (sur la tablette arri è re) Fixez la plaque m é tallique sur une surface aussi plate que possible o ù l ’ antenne GPS sera dirig é e vers une vitre. Posez l ’ antenne GPS sur la plaque m é tallique.
Installation de l ’ antenne à l ’ ext é rieur du v é hicule (sur la carrosserie) Posez l ’ antenne GPS sur une surface aussi plate que possible, telle que le toit ou le capot du coffre. (L ’ antenne GPS est immobilis é e par son propre aimant.
29 Après installation de ce produit 1. Branchement de la batterie. V é rifiez une nouvelle fois que toutes les connexions ont é t é bien faites et que ce produit est correctement install é e.
ENG/MASTER COVER 98 PIONEER CORPORATION 4-1, MEGURO 1-CHOME, MEGURO-KU, TOKYO 153-8654, JAPAN PIONEER ELECTRONICS (USA) INC. P.O. Box 1540, Long Beach, California 90801-1540, U.S.A. TEL: (800) 421-1404 PIONEER EUROPE NV Haven 1087, Keetberglaan 1, B-9120 Melsele, Belgium TEL: (0) 3/570.
An important point after buying a device Pioneer AVIC-N3 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Pioneer AVIC-N3 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Pioneer AVIC-N3 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Pioneer AVIC-N3 you will learn all the available features of the product, as well as information on its operation. The information that you get Pioneer AVIC-N3 will certainly help you make a decision on the purchase.
If you already are a holder of Pioneer AVIC-N3, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Pioneer AVIC-N3.
However, one of the most important roles played by the user manual is to help in solving problems with Pioneer AVIC-N3. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Pioneer AVIC-N3 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
