Instruction/ maintenance manual of the product Moltio HD8767 Philips Saeco
Go to page of 68
English USER MANU AL Read carefully befor e using the machine. Register your pr oduct and get suppor t at www .philips.com/w elcome T ype HD8766 - HD8767 EN 02 02.
IMPORT ANT SAFEGU ARDS When using electrical appliances, basic safety precautions should always be followed, including the following: 1. Read all instructions. 2. Do not touch hot surfaces. Use handles or knobs. 3. T o protect against fire, electric shock and injury to persons do not immerse cord, plugs, or appliance in water or other liquid.
CA UTION This appliance is for household use only . Any servicing , other than cleaning and user maintenance, should be performed by an authorized service center . Do not immerse machine in water . T o reduce the risk of fire or electric shock, do not disassemble the machine.
2 ENGLISH C ONTENTS IMPORT ANT ..................................................................................................... 4 Safety instruc tions ...............................................................................................
3 ENGLISH ESPRESSO AND C OFFEE BREWING ....................................................................30 Espresso and co ee brewing using co ee beans ..................................................................................... 30 Espresso and co ee brewing using pre-ground co ee .
4 ENGLISH IMPORT ANT Safety instructions This machine is equipped with safety featur es. Nevertheless read the safety instructions carefully and only use the ma- chine as described in these instructions to avoid ac cidental injur y or damage. Keep this user manual for futur e reference .
5 ENGLISH 5 • Remov e the mains plug from the w all socket: - If a disturbance occurs . - If the machine will not be used for a long time. - Before cleaning the machine. Pull on the plug , not on the mains cord . D o not touch the mains plug with wet hands .
6 ENGLISH • Do not place the machine on a hot plate , directly nex t to a hot ov en, heat er or similar sourc e of heat . • Only put co ee beans into the co ee bean hopper . If ground c o ee, instant co ee or any other substance is put in, it may damage the machine .
7 ENGLISH 7 C ompliance with standar ds The machine c omplies with ar t.13 of the Italian L egislative Decree dat ed 25 July 2005, no. 151 “Implemen tation of the directives 2005/95/EC, 2002/96/EC a.
8 INST ALLA TION Product overview 17 21 22 19 23 20 32 18 12 3 11 12 13 14 5 4c 4b 4a 6 7 8 9 24 26 27 29 25 28 16 15 10 30 31.
9 ENGLISH 9 General description 1. Co ee bean hopper lock ing/removal selector 2. Pre-ground co ee compar tment 3. Storage area for cups 4a. Co ee bean hopper 4b . Co ee bean hopper tray 4c. Co ee bean hopper lid 5. Control P anel 6. Co ee dispensing spout 7.
10 ENGLISH PREP ARING FOR USE Machine Packaging The original packaging has been designed and constructed to protect the machine during transport. W e recommend keeping the packaging material for possible future transport. Machine Installation 1 Remove the drip tray with g rill from the packaging.
11 ENGLISH 11 5 Push gently on the edge of the water tank door to r elease the hand- grip. 7 Rinse the water tank with fresh water . 8 Fill the wat er tank with fresh water up to the M AX level and slide it back into the machine. Make sure it is fully inserted.
12 ENGLISH 13 Switch the pow er button to “I” to turn on the machine. The red led next to the “ ” button blinks. Y ellow 14 T o turn on the machine, simply press the “ ” button. T he control panel indicates that the circuit must be primed.
13 ENGLISH 13 USING THE MACHINE FOR THE FIRST TIME When using the machine for the rst time, the follo wing activities need to happen: 1) Y ou need to prime the circuit; 2) The machine will perform an automatic rinse/ self-cleaning cycle; 3) Y ou need to initiate a manual rinse cycle.
14 ENGLISH Automatic rinse/self-cleaning cycle When warm-up is completed, the machine automatically performs a rinse/ self- cleaning cycle of the internal circuit with fresh water . This takes less than a minute. 1 Place a container under the co ee dispensing spout to catch the small amount of water which will be dispensed.
15 ENGLISH 15 2 Check that the machine shows this display . Green 3 Select the pre -ground co ee brewing function by pressing the “ ” button. The machine shows this display . Note: Do not add pre- ground co ee into the compartment. 4 Press the “ ” button.
16 ENGLISH Red 9 Once the water has been dispensed, r emove and empty the container . 11 At the end, ll the water tank again up to the MAX level . Now the ma- chine is ready for br ewing co ee.
17 ENGLISH 17 Measuring and Progr amming W ater Hardness Measuring water hardness is very impor tant for de ning the frequency in which the machine has to be descaled and to install the “INTENZA+” water lter (for more detail on the wat er lter see next chapter).
18 ENGLISH 7 Press the “ ” button to exit the programming menu. Now the ma- chine is ready to brew . “INTENZA+” water lter installation W e recommend you t o install the “INTENZA+” water lter as this prevents limescale to build up in your machine and preserves a more intense ar oma to your co ee .
19 ENGLISH 19 2 Remove the “INTENZA+” water lter from its packaging, immerse it ver- tically (with the opening positioned upwards) in cold water and gently press the sides so as to let the air bubbles out.
20 ENGLISH 9 Press the “ ” button to select “ON” and press the “ ” MENU button to con rm. Y ellow Replacing the “INTENZ A+” water lter When the “INTENZA+” water lter needs to be replaced with a new one , the following icon is displa yed.
21 ENGLISH 21 Y ellow Green 4 T o exit, press the “ ” button. Now the machine is ready t o brew . The machine is now prog rammed to manage a new lter . Note: If the “INTENZA+” water lter is already installed and you want to remo ve but not replace -it, select the “OFF” option instead.
22 ENGLISH 2 Lift the sides of the co ee bean hopper with both hands as shown in the image. Caution: Do not remov e the bean hopper in a di erent wa y to av oid spilling co ee beans . 3 After removal put the prot ection cover on the machine to prev ent dust.
23 ENGLISH 23 3 Remove an y beans from the co ee bean hopper compar tment. 4 Inser t the co ee bean hopper into the compar tment as shown on the image.
24 ENGLISH Co ee bean selection This function allows you to optimiz e the grinding for selected type of cof- fee beans. Y ellow Green Green Green 2 Press the “ ” button or the “ ” button to select the t ype of co ee beans in the co ee bean hopper.
25 ENGLISH 25 Green Co ee emptying cycle If you want to change co ee beans, we recommend that you empty the co ee duct and grinder. In this way y ou will taste the full aroma of the new co ee beans. For this f ollow the steps below . 1 Inser t the co ee bean hopper with the new co ee beans.
26 ENGLISH ADJUSTMENTS The machine allows f or certain adjustments so that you can brew the best possible co ee tasting. Saeco Adapting S ystem Co ee is a natural product and its charac teristics may change accor ding to its origin, blend and roast.
27 ENGLISH 27 1 2 2 Press and turn the g rinder adjustment knob under the co ee bean hopper one notch at a time. Use the co ee grinder adjustment key provided with the machine. Y ou will taste the di erence after brewing 2-3 cups of co ee.
28 ENGLISH Adjusting the co ee dispensing spout The height of the dispensing spout can be adjusted to better t the dimen- sions of the cups that you wish to use. Move the dispensing spout up or down with your ngers to adjust its height as shown in the image.
29 ENGLISH 29 Adjusting the C o ee L ength The machine allows y ou to adjust the amount of brewed c o ee according to your taste and/or the size of y our cups. Each time the “ ” or “ ” button is pressed , the machine brews a pre-set amount of co ee.
30 ENGLISH ESPRESSO AND C OFFEE BREWING Before br ewing the co ee, make sure that there are no warnings shown on the control panel, and that the wat er tank and co ee bean hopper are lled. Espresso and co ee brewing using co ee beans 1 Place 1 or 2 cups under the dispensing spout.
31 ENGLISH 31 Espresso and co ee brewing using pre-ground co ee This function allows you to use pr e- ground and deca einated co ee. With the pre-ground co ee func tion you can only brew one co ee at a time. 1 Press the “ ” button to select the pre -ground co ee func tion.
32 ENGLISH STEAM DISPENSING/ CAPPUCCINO BREWING W arning: Danger of scalding! Dispensing may be prec eded by small jets of hot water . The Classic Milk F rother may r each high temperatures: Ne ver touch it with bare hands. U se the appropriate protective handle only .
33 ENGLISH 33 4 Press the “ ” button to star t dispensing steam. 5 The following ic on is displayed during pr e-heating time required by the machine. 6 Fr oth the milk by gently swirling the container and moving it up and down. 7 When the milk froth has the desired consist ency, pr ess the “ ” button to stop dispensing steam.
34 ENGLISH HO T W A TER DISPENSING W arning: Danger of scalding! Dispensing may be prec eded by small jets of hot water . The Classic Milk F rother may r each high temperatur es: never touch it with bare hands. U se the appropriate protective handle only .
35 ENGLISH 35 4 The following ic on is displayed during pr e-heating time required by the machine. 5 Pour the desir ed amount of hot water . T o stop the hot water dispens- ing, press the “ ” button.
36 ENGLISH 1 Empty and clean the co ee grounds draw er daily with the machine turned on. - Push gently on the edge of the door of the co ee grounds drawer to release the handgrip . - Remove the co ee grounds drawer by pulling the handg rip. Other maintenance operations can only be carried out when the machine is turned o and unplugged.
37 ENGLISH 37 Daily cleaning of the water tank 1 Remove the small white lter or the INTENZA+ water lter (if installed) from the water tank and wash it with fresh wat er . 2 Put the small white lter back or the INTENZA+ water lter (if installed) in its housing by gently pressing and turning it at the same time.
38 ENGLISH W eek ly Cleaning of the Classic Milk Frother The weekly cleaning is more thorough, since y ou need to disassemble all the Classic Milk Frother c omponents. The following cleaning operations ar e required: 1 Remove the external part of the Classic Milk Frother .
39 ENGLISH 39 2 Remove the co ee grounds draw er . Open the ser vice door . 3 Remove and clean the co ee residues drawer . 4 T o remov e the brew group , press the «PUSH» button and pull it by the handle. 5 Thoroughly wash the brew g roup with fresh, lukewarm water and car e- fully clean the upper lter .
40 ENGLISH 8 Make sure the brew gr oup is in the rest position; the two ref erence signs must match. If they do no match, proceed as described in step (9). 9 Gently pull down the lever until it touches the br ew group base and the two refer ence signs on the side of the brew g roup do match.
41 ENGLISH 41 12 Inser t the co ee residues drawer and close the service door . 13 Inser t the co ee grounds drawer . W eek ly cleaning of the co ee bean hopper , the tray and the com- partme.
42 ENGLISH 2 Lubricate the shaft too . Monthly Lubrication of the Br ew Group Lubricate the br ew group after appro ximately 500 cups of co ee or once a month. Y ou can purchase separately the Saec o grease to lubricate the br ew group . F or further details, please refer to the maintenance pr oducts page in this manual.
43 ENGLISH 43 3 Inser t the brew group in its seat until it locks int o place (see “ Weekly Cleaning of the Brew Group ” chapter). Insert the co ee residues drawer .
44 ENGLISH 8 Let the solution take e ect for approximately 15 minutes . Make sure you discard the dispensed water . 9 Switch the pow er button on the back of the machine to “I” . T o turn on the machine press the “ ” button. W ait until the automatic rinse cycle has been completed.
45 ENGLISH 45 11 W ash the brew group thor oughly with fresh water . 12 After rinsing the brew group , inser t it again in its seat until it locks into place (see the “ Weekly Cleaning of the Brew Group ” chapter). I nsert the co ee residues drawer and the co ee grounds drawer .
46 ENGLISH 2 Remove the Classic Milk F rother from the steam/hot wat er wand. 3 Remove the “INTENZA+” water lter from the water tank if it was in- stalled and replace it with the small white original one . Place the water tank back into the machine.
47 ENGLISH 47 Note: If you press the “ ” button by mistake, press the “ ” button to quit. 6 Remove the water tank and pour the entir e content of the descal- ing solution. Then ll the water tank with fresh water up to the C ALC CLEAN l ev el .
48 ENGLISH 17 When this icon is displayed , the water tank is empty . Repeat steps 12 to 16. Then go to step 18. 16 Press the “ ” button to star t the rinsing cycle. 14 Remove the water tank, rinse it and ll it up to the MAX lev el with fresh water .
49 ENGLISH 49 Y ellow 20 When the amount of water needed for the rinse cycle has been completely dispensed, this icon on the side is displa yed. P ress the " " MENU button to quit the descaling cycle. 21 Press the“ ” button to prime the circuit.
50 ENGLISH PROGRAMMING Y ou can adjust the machine functions to your personal pref erence by ac- cessing the program menu. The follo wing parameters can be adjusted Co ee temperatur e This function allows you to adjust the co ee brewing temperature.
51 ENGLISH 51 How to program y our machine In this example, it is shown how to pr ogram the co ee temperature. Pr o- ceed in the same way to prog ram the other functions. The programming menu can only be acc essed when the machine is on and shows this display .
52 ENGLISH Y ellow 5 When the display value is changed, the “OK” message appears. Press the “ ” MENU button to con rm the change. 6 Press the “ ” button to exit the programming menu. Note: The machine will automatically exit the programming menu if y ou do not push any button f or 3 minutes.
53 ENGLISH 53 MEANING OF THE DISPLA Y SYMBOLS This machine is equipped with a colour-coded system to make the user’ s understanding of the display signals easier .
54 ENGLISH Ready Signals (Green C olour) The machine is brewing two cups of co ee. Co ee brewing using pre -ground co ee in progress. The machine is programming the amount of co ee to brew.
55 ENGLISH 55 W arning Signals ( Y ellow Colour) The machine is heating up to brew bev erages or dispense hot water . The machine is performing the rinse cycle. W ait until the machine has com- pleted the cycle. The machine needs the “INTENZA+” water lter to be replaced .
56 ENGLISH W arning Signals (Red Colour) Close the service door . Fill the c o ee bean hopper . The brew gr oup must be inserted into the machine. Inser t the co ee grounds drawer . Empty the co ee grounds drawer and the c o ee residues drawer .
57 ENGLISH 57 TROUBLESHOOTING This chapter summarizes the most common pr oblems you could encoun- ter with your machine. If you are unable to solve the pr oblem with the information below , visit ww w .philips.com/support for a list of frequently asked questions or contact the Philips Saeco hotline in your country.
58 ENGLISH Note: These problems can be consider ed normal if the co ee blend has been changed or if the machine has just been installed. In this case wait until the machine per forms a self-adjusting operation as described in section "Saeco Adapting Syst em" .
59 ENGLISH 59 ENERGY SA VING Stand-by The Saeco full automatic espresso machine is desig ned for energy sa ving, as stated by the Class A energy label . After 30 minutes of inactivity, the machine turns o automatically. If a product has been brewed, the machine performs a rinse cycle.
60 ENGLISH TECHNICAL SPECIFICA TION The manufacturer reserves the right to make changes to the technical speci cations of the product. Nominal V oltage - Power Rating - Po wer Supply See label on the inside of the service door Housing Material ABS - T hermoplastic Size (w x h x d) 256 x 350 x 470 mm W eight 8.
61 ENGLISH 61 ORDERING MAINTENANCE PRODUCTS F or cleaning and descaling, use Saeco maintenanc e products only . Y ou can purchase these at the Philips online shop at www.
62 ENGLISH MACHINE A C CESSORIES - Removable co ee bean hopper CA6803 - Maintenance Kit CA 6706.
.
.
.
www.philips.com/saeco The manufacturer reserves the right to make changes without prior notice. Rev.00 del 05-02-13 02 EN 02.
An important point after buying a device Philips Saeco Moltio HD8767 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Philips Saeco Moltio HD8767 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Philips Saeco Moltio HD8767 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Philips Saeco Moltio HD8767 you will learn all the available features of the product, as well as information on its operation. The information that you get Philips Saeco Moltio HD8767 will certainly help you make a decision on the purchase.
If you already are a holder of Philips Saeco Moltio HD8767, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Philips Saeco Moltio HD8767.
However, one of the most important roles played by the user manual is to help in solving problems with Philips Saeco Moltio HD8767. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Philips Saeco Moltio HD8767 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center