Instruction/ maintenance manual of the product Intelia HD8753 Philips Saeco
Go to page of 72
USER MANUAL PLEASE READ THIS USER MANUAL CAREFULL Y BEFORE USING THE MACHINE. Register y our product and get suppor t at w w w .philips .com/w elcome English T ype HD8753 EN 02 02.
IMPORT ANT SAFEGU ARDS When using electrical appliances, basic safety precautions should always be followed, including the following: 1. Read all instructions. 2. Do not touch hot surfaces. Use handles or knobs. 3. T o protect against fire, electric shock and injury to persons do not immerse cord, plugs, or appliance in water or other liquid.
CA UTION This appliance is for household use only . Any servicing, other than cleaning and user maintenance, should be performed by an authorized service center . Do not immerse machine in water . T o reduce the risk of fire or electric shock, do not disassemble the machine.
2 ENGLISH Congratulations on y our purchase of a Saeco Intelia One T ouch Cappuccino full automatic espr esso machine! T o fully bene t from the support that Saeco o ers , please register your product at www .philips.com/w elcome . This user manual applies to HD8753.
3 ENGLISH CAPPUCCINO BREWING ...................................................................................27 Adjusting the cappuccino lenght ........................................................................................................
4 ENGLISH IMPORT ANT Safety instructions This machine is equipped with safety featur es. Nevertheless read the safety instructions carefully and only use the machine as described in these instructions to avoid accidental injury or damage. Keep this user manual for future r eference .
5 ENGLISH 5 Caution • The machine is for household use only . I t is not intended f or use in en- vironments such as sta kitchens of shops, o ces , farms or other work environments .
6 INST ALLA TION Product overview 31 32 21 22 20 17 19 23 18 12 3 11 10 12 13 14 4 5 6 7 8 9 24 27 15 25 28 26 29 30 16.
7 ENGLISH 7 General description 1. Grinder adjustment knob 2. Pre-ground co ee compar tment 3. Co ee bean hopper 4. Co ee bean hopper lid 5. Control panel 6. Dispensing spout 7. F ull drip tray indicator 8. Cup holder grill 9. Drip tray 10. W ater dispenser (removable) 11.
8 ENGLISH PREP ARING FOR USE Machine packaging The original packaging has been designed and constructed to protect the machine during transport. W e recommend keeping the pack aging material for possible future transport. Machine installation 1 Remove the drip tray with g rill from the packaging.
9 ENGLISH 9 5 Remove the water tank. 6 Rinse the water tank under fresh water . 7 Fill the wat er tank with fresh water up to the MA X level and reinsert it into the machine.
10 ENGLISH 12 Switch the pow er button to “I” to turn on the machine. The display shows the stand-by icon. Black Y ellow 13 T o turn on the machine, simply press the “ ” button.
11 ENGLISH 11 2 Press the “ ” button to start the cycle. The machine star ts the auto- matic priming of the circuit by dispensing some water thr ough the dispensing spout. Y ellow 3 The bar under the icon shows the operation pr ogress. When the pro- cess is completed, the machine st ops dispensing automatically .
12 ENGLISH Manual rinse cycle During this process you activate the co ee brewing cycle and fresh wat er ows through dispensing spout. This takes a few minutes. 1 Place a container under the dispensing spout. 2 Check that the machine shows this display .
13 ENGLISH 13 8 The following ic on is displayed. Green 9 Press the “ ” button t o star t dispensing hot water . Green 10 This icon is display ed. The machine reminds you to install the water dis- pensing spout. Check that it is correctly installed.
14 ENGLISH Measuring and programming wa ter hardness Measuring water hardness is very impor tant for de ning the frequency in which the machine has to be descaled and to install the “INTENZA+” water lter (for more detail on the water lter see next chapter).
15 ENGLISH 15 7 Press the “ ” button t o exit the programming menu. Green “INTENZA+” water lter installation W e recommend you to install the “INTENZA+” water lter as this prevents lime scale to build up in your machine and preserves a more intense ar oma to your espresso c o ee .
16 ENGLISH 4 Put the lter into the empty water tank. Press it until it cannot mov e further down. 5 Fill the wat er tank with fresh water and reinsert it into the machine. 6 Dispense the entire water tank by using the hot water function (see chapter “Hot water dispensing ” .
17 ENGLISH 17 Y ellow Y ellow Green 2 Press the “ ” button and scr oll the pages by pressing the “ ” but- ton until the following ic on is displayed. 3 Select the “RESET ” option. Press the “ ” button t o con rm. 4 T o exit, press the “ ” button The machine is now prog rammed to manage a new lter .
18 ENGLISH ADJUSTMENTS The machine allows f or certain adjustments so that you can brew the best tasting co ee possible. Saeco Adapting S ystem Co ee is a natural pr oduct and its characteristics may change according to its origin, blend and roast.
19 ENGLISH 19 1 Press and turn the g rinder adjustment knob one notch at a time. Y ou will taste the di erence after brewing 2-3 cups of espr esso. 2 The ref erence marks inside the co ee bean hopper indicate the grind setting.
20 ENGLISH Adjusting the dispensing spout The height of the dispensing spout can be adjusted to better t the dimen- sions of the cups that you wish to use. Move the dispensing spout up or down with your ngers to adjust its height as shown in the image.
21 ENGLISH 21 Adjusting the co ee length The machine allows y ou to adjust the amount of brewed co ee according to your taste and/or the size of y our cups. Each time the “ ” or “ ” button is pr essed, the machine brews a pr e -set amount of co ee.
22 ENGLISH ESPRESSO AND C OFFEE BREWING Before br ewing co ee, make sure that ther e are no warnings shown on the display , and that both, water tank and co ee bean hopper are lled. Espresso and co ee brewing using co ee beans 1 Place 1 or 2 cups under the dispensing spout.
23 ENGLISH 23 Espresso and co ee brewing using pre-ground co ee This function allows to use pre-ground and deca einated co ee. With the pre-ground co ee function you can only brew one co ee at a time. 1 Press the “ ” button t o select the pre -ground co ee function.
24 ENGLISH MILK CARAFE This chapter explains how to use a milk caraf e to prepare a cappuc cino or hot milk. Note: Before using the milk caraf e, clean it thoroughly as described in the “Clean- ing and Maintenance ” chapter . W e recommend to ll it with cold milk (approx.
25 ENGLISH 25 Inserting the milk carafe 1 If installed, remove the wat er dispenser as shown in the gure: - P ress the two buttons on the side to unlock it and lift it slightly; - P ull the water dispenser to remo ve it. 2 Open the milk carafe dispenser by turning it count er-clock wise until it locks into place.
26 ENGLISH Removing the milk caraf e 1 Rotate the carafe upwar ds until it releases from the insert in the drip tray . 2 Pull awa y from the machine until it is completely detached . 3 Close the milk carafe dispenser by turning it clockwise. Emptying the milk carafe 1 Press the r elease buttons to allow the lid remo val.
27 ENGLISH 27 CAPPUCCINO BREWING W arning: Danger of scalding! Dispensing may be prec eded by short sprays of milk and steam. Risk of burning. Wait until the end of the cycle bef ore removing the milk caraf e . 1 Fill the milk caraf e with milk. The level must be between the minimum (MIN) and maximum (MAX) indication on the milk caraf e.
28 ENGLISH 5 The following ic on is displayed during pre-heating time required by the machine. Y ellow 6 When the machine shows the follo wing icon, the machine pours a milk. T he pouring can be stopped by pressing the “ ” button. Green Green 7 Once the milk froth has been poured , the machine brews co ee.
29 ENGLISH 29 3 Press and hold the “ ” button until the ‘MEMO ’ icon appears on the display . Then r elease the button. The machine is now pr ogramming. Y ellow Green 4 The following ic on is displayed during pre-heating time required by the machine.
30 ENGLISH HO T MILK BREWING W arning: Danger of scalding! Dispensing may be prec eded by short sprays of milk and steam. Risk of burning. W ait until the end of the cycle befor e removing the milk caraf e. 1 Fill the milk caraf e with milk. The level must be between the minimum (MIN) and maximum (MAX) indication on the milk caraf e.
31 ENGLISH 31 Y ellow Green 6 The following ic on is displayed during pre-heating time required by the machine. 7 The machine pours a pre-de ned amount of hot milk into the cup. The pouring can be stopped by pressing the “ ” button. Note: After using the milk carafe, clean it as described in the ‘Cleaning and Main- tenance ’ chapter .
32 ENGLISH HO T W A TER DISPENSING W arning: Danger of scalding! Dispensing may be prec eded by short sprays of hot water and steam. Risk of burning. Wait un til the end of the cycle before remo ving the water dispenser . 1 Slightly tilt the water dispenser and then insert it all the way in into the guides in the machine.
33 ENGLISH 33 3 Place a container under the hot water dispenser . Green 4 Press the “ ” button. The following icon is display ed. 5 Press the “ ” button t o start dispensing process. 6 This icon is display ed. The machine reminds you to install the water dispenser .
34 ENGLISH Green 8 Pour the desir ed amount of hot water . T o stop the hot wat er dispens- ing process press the “ ” button. CLEANING AND MAINTENANCE Daily cleaning of the machine Caution: Timely cleaning and maintenanc e of your machine is v ery impor tant as it prolongs the life of y our machine.
35 ENGLISH 35 2 Empty and clean the co ee residues drawer located inside of the ma- chine. Open the service door , remove the drawer and empty the co ee residues.
36 ENGLISH Daily cleaning of the water tank 1 Remove the small white lter or the INTENZA+ water lter (if installed) from the water tank and wash it with fresh wat er . 2 Put the small white lter back or the INTENZA+ water lter (if installed) in its housing by gently pressing and turning it at the same time.
37 ENGLISH 37 W eek ly cleaning of the milk carafe The weekly cleaning is more thorough as it r emoves any milk r esidues from the milk carafe dispenser . 1 Press the r elease buttons to remo ve the lid. W eek ly cleaning of the machine 1 Clean the seat of the drip tray .
38 ENGLISH 4 Remove the top and ll the milk carafe up to the M AX level with fr esh water . 5 Put the top back into the milk caraf e. Green 6 Open the milk carafe dispenser and insert the carafe into the machine. 7 Place a container under the dispensing spout.
39 ENGLISH 39 Y ellow Green 9 The following ic on is displayed during pre-heating time required by the machine. 10 Once the machine stops dispensing water , the cleaning is nished. Remove the milk caraf e and empty it. 11 Press the r elease buttons to remo ve the lid.
40 ENGLISH 14 Remove the dispenser ring (A ) from the milk carafe dispenser . 15 Press the butt on indicated with the arrow to unlock the lid . 16 Detach the lid (B) from the milk carafe dispenser b y pulling it down while slightly pressing on the sides.
41 ENGLISH 41 19 Remove the suction tube (E). 20 Clean thoroughly all the parts with lukewarm water . Note: Y ou can also clean these parts in the dishwasher . 21 Reassemble the parts following the reverse order . Note: As explained at step 13, the dispenser can only be inserted into the lid, when it is in the refer ence ( ) position.
42 ENGLISH W eek ly cleaning of the brew group The brew gr oup should be cleaned every time the co ee bean hopper is lled or at least once a week. 1 T urn o the machine by pressing the “ ” button and r emove the plug from the socket. 2 Remove the co ee gr ounds drawer .
43 ENGLISH 43 6 Let the brew g roup air-dr y thoroughly . 7 Thoroughly clean the inside of the machine using a soft, dampened cloth. 8 Make sure the brew gr oup is in the rest position; the two refer ence signs must match. If they do not match, proceed as described in step (9).
44 ENGLISH Monthly cleaning of the milk caraf e In the monthly cleaning cycle we use the “Saeco Milk Circuit Cleaner”to keep the entire circuit clean of milk residues . Y ou can purchase separately the “Saeco Milk Circuit Cleaner” . Please ref er to the maintenance products page for further details.
45 ENGLISH 45 Green Y ellow 5 Press the “ ” button. The following icon is display ed. Pr ess the “ ” button to select hot milk. 6 The following ic on is displayed during pre-heating time required by the machine. 7 Once the machine stops dispensing water , repeat steps 5 - 8 until the carafe is emptied.
46 ENGLISH 13 Once the machine stops dispensing water , repeat steps 12 -15 until carafe is emptied. 14 Remove the milk caraf e and the container from the machine. Repeat steps 10 - 16 one more time. 15 Disassemble and wash the milk carafe as described in the “Weekly cleaning of the milk carafe ” chapter .
47 ENGLISH 47 2 Lubricate the shaft too . 3 Inser t the brew gr oup in its seat until it locks into place. (see “ Weekly cleaning of the brew group ” chapter). Insert the co ee residues drawer . 4 Close the service door . Inser t the co ee grounds dra wer .
48 ENGLISH Monthly cleaning of the brew gr oup with “ Co ee Oil Remover” Besides weekly cleaning, we rec ommend running this cleaning cycle with the “Co ee Oil Remov er” after approximately 500 cups of co ee or once a month. This operation completes the maintenanc e process of the brew group .
49 ENGLISH 49 5 Press the “ ” button to start a co ee brewing cycle. 6 W ait until the machine automatically ends the dispensing process . 7 Press the “ ” button t o turn o the machine, and let the solution take e ect for approximately 15 minut es.
50 ENGLISH Y ellow Monthly cleaning of the co ee bean hopper Clean the co ee bean hopper once a month when it is empty with a damp cloth to remov e co ee oil. Thereafter re ll it with co ee beans. DESCALING The descaling process takes appr ox.
51 ENGLISH 51 2 Inser t the milk carafe empty . 3 Remove the “INTENZA+” water lter from the water tank if it was installed. 4 Press the “ ” button. P ress the “ ” button until the following display is shown. 5 Press the “ ” button to ent er the descaling menu.
52 ENGLISH 9 Press the “ ” button to start the descaling cycle. 10 The machine will start dispensing the descaling solution at inter vals. The bar on the display shows the cycle pr ogress. 11 When this icon is displayed , the water tank is empty .
53 ENGLISH 53 17 When this icon is displayed , the water tank is empty . Repeat steps 13 – 17. Then continue to step 19. Y ellow 20 When the amount of water needed for the rinse cycle has been com- pletely dispensed, this icon on the side is displa yed.
54 ENGLISH 25 Place back the “INTENZA+” water lter int o the water tank if it was installed. Note: At the end of the descaling cycle, wash the brew g roup as described in the “Weekly cleaning of the brew group ” chapter .
55 ENGLISH 55 PROGRAMMING Y ou can change some of the machine operating settings according t o her/ his prefer ences. Adjustable parameters Co ee temperatur e This function allows you to adjust the co ee br ewing temperature.
56 ENGLISH Progr amming mode example In this example, it is shown how to pr ogram the display contrast. Pr oceed in the same way to program the other functions. The programming menu can only be acc essed when the machine is on and shows this display .
57 ENGLISH 57 5 When the display value is changed, the “OK” message appears. Pr ess the “ ” button to c on rm the change. Y ellow 6 Press the “ ” button t o exit the programming mode. Note: The machine will automatically exit the programming mode if y ou do not push any button f or 3 minutes.
58 ENGLISH MEANING OF THE DISPLA Y SYMBOLS This machine is equipped with a colour-coded system to make the user’ s understanding of the display signals easier . The icons are colour-coded accor ding to the tra c light principle. Ready Signals (Green C olour) The machine is ready to br ew products.
59 ENGLISH 59 Ready Signals (Green C olour) The machine is programming the amount of co ee t o be brewed. Co ee br ewing using pre- ground c o ee in progress. The machine is brewing cappuccino . The machine is programming the amount of milk to dispense f or the cappuc- cino.
60 ENGLISH W arning Signals (Y ellow C olour) The machine is heating-up to brew bev erages or dispense hot water . The machine is heating-up during beverages prog ramming. The machine performs the rinsing cycle. Wait until the machine has c om- pleted the cycle.
61 ENGLISH 61 W arning Signals (Red Colour) Close the service door . Fill the c o ee beans hopper . The brew gr oup must be inserted into the machine. Inser t he co ee ground dra wer . Empty the co ee grounds drawer and the co ee r esidues drawer .
62 ENGLISH TROUBLESHOOTING This chapter summarizes the most common pr oblems you could encoun- ter with your machine. If you ar e unable to solve the problem with the information below , visit ww w .philips.com/support for a list of frequently asked questions or contact the Philips Saeco hotline in your country.
63 ENGLISH 63 Note: These problems can be consider ed normal if the co ee blend has been changed or if the machine has just been installed. In this case wait until the machine per forms a self-adjusting operation as described in chapt er “Saeco Adapting Sy stem ” .
64 ENGLISH ENERGY SA VING Stand-by The Saeco full automatic espresso machine is desig ned for energy saving- proven b y the Class A energy label. After 30 minutes of inactivity, the machine turns o automatically . I f a product has been brewed, the machine performs a rinsing cycle.
65 ENGLISH 65 TECHNICAL SPECIFICA TION The manufacturer reserves the right to make changes to the technical speci cations of the product Nominal V oltage - Pow er Rating - Po wer Supply See label on the inside of the service door Housing material ABS - Thermoplastic Size (w x h x d) 256 x 340 x 440 cm W eight 9 kg Po wer Cord L ength 1.
66 ENGLISH ORDERING MAINTENANCE PRODUCTS F or cleaning and descaling, use Saeco maintenance pr oducts only. Y ou can purchase these at the Philips online shop at www.
67 ENGLISH 67 - Maintenance Kit CA 6706 - Milk Circuit Cleaner: CA6705.
.
.
w w w .philips.com/saeco The manufacturer reserves the right to make changes without prior notice. Rev.06 del 15-02-13 EN 02 02.
An important point after buying a device Philips Saeco Intelia HD8753 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Philips Saeco Intelia HD8753 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Philips Saeco Intelia HD8753 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Philips Saeco Intelia HD8753 you will learn all the available features of the product, as well as information on its operation. The information that you get Philips Saeco Intelia HD8753 will certainly help you make a decision on the purchase.
If you already are a holder of Philips Saeco Intelia HD8753, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Philips Saeco Intelia HD8753.
However, one of the most important roles played by the user manual is to help in solving problems with Philips Saeco Intelia HD8753. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Philips Saeco Intelia HD8753 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
