Instruction/ maintenance manual of the product CS-72M ATEN Technology
Go to page of 16
User Manual CS-72M Read this guide thoroughly and follow the installation and operation procedures carefully in order to prevent any damage to the unit and/or any devices that connect to it.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protec tion against harmful interference in a residential installation.
Overview The CS-72M KVM (Keyboard, Video, Mouse), Switch is a control unit that allows the control of two comput ers from a single console (keyboard, monitor, and mouse). With it s cust om designed SCSI-20 CPU port connectors, the CS-72M significantly reduces the number of ports required for a 2 Port KVM switch.
Features M Compact vertical-standing design M Custom SCSI-20 connector layout reduces the number of ports and makes for a streamlined installation M Easy to install - no software required - connecting.
System Requirements Console M A VGA, SVGA, or Mult isync monit or capable of the highest resolution that you will be using on any computer in the installation. M A PS/2 style keyboard. M A PS/2 style mouse. Note: The CS-72M only supports PS/2 style mice - it does not support serial mice.
Components Front View: 1. Port Selection Switch es M Press a switch to give the KVM focus to the system attached to its corresponding port. M Pressing Buttons 1 and 2 simultaneously for 3 seconds starts Auto Scan Mode (see p.
Rear View: 1. CPU Port Connectors The KVM cables that connect the unit to the keyboard, video, mouse, and audio ports on the computers you are connecting up can plug into any available port. Note: Only cables designed to work with this switch can be used.
Installation Preparation The CS-72M can either lay flat on the desktop or stand upright. To have it stand upright, place it in the mounting stand. Make sure that the long end of the stand is to the rear.
Connecting Up To connect up the unit, refer to the diagrams on pages 8 and 9 as you do the following: 1. Plug your keyboard and mouse into their respective connectors on the CS-72M’s front panel. 2. Plug your monitor, microphone, and speakers into their respective connectors on the CS-72M’s rear panel.
- 8 - 2 3 4 1 2003-08-01.
Operation Controlling the computers in your CS-72M installation from a single console could not be easier. Two port selection methods that provide instant access to the computers are available: M Manu.
To hotkey toggle the ports: 1. Press and hold down the Num Lock key 2. Press and release the asterisk key or the minus key 3. Release the Num Lock key: [Num Lock] + [*] or: [Num Lock] + [-] Note: The asterisk or minus key must be released within one half second, otherwise the hotkey operation is canceled.
Auto Scan Mode The CS-72M’s Auto Scan feature automatically switches between the two ports at regular 5 seconds intervals so that you can monitor the computer activity without having to take the trouble of switching yourself. To invoke Auto Scan Mode hold down both Port Selection buttons for 3 seconds (see p.
Selected LED Display Activity Meaning Off Port is not selected. On (Steady) Port is connected to an active computer. Flashing (On and Off equal) Port is connected to an active computer and is being accessed in Auto Scan mode.
Troubleshooting Symptom Cause Action Keyboard 1 and/or Mouse 2 Not Responding Loose cables. Check all c able connections to make sure they are completely seated in their sockets. Switch is in Auto Scan Mode. Press either Port Selection switch or the Spacebar to exit Auto Scan Mode.
Troubleshooting Notes: 1. The unit is designed to work with PS/2 keyboards. Older XT (84 key) and AT keyboards will not work. 2. Some Notebooks have trouble when their mouse and keyboard ports are used simultaneously. To avoid this, only connect the mouse port or the keyboard port.
An important point after buying a device ATEN Technology CS-72M (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought ATEN Technology CS-72M yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data ATEN Technology CS-72M - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, ATEN Technology CS-72M you will learn all the available features of the product, as well as information on its operation. The information that you get ATEN Technology CS-72M will certainly help you make a decision on the purchase.
If you already are a holder of ATEN Technology CS-72M, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime ATEN Technology CS-72M.
However, one of the most important roles played by the user manual is to help in solving problems with ATEN Technology CS-72M. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device ATEN Technology CS-72M along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
