Instruction/ maintenance manual of the product CS-72A ATEN Technology
Go to page of 16
User Manual CS-72A Read this guide thoroughly and follow the installation and operation procedures carefully in order to prevent any damage to the unit and/or any devices that connect to it.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protec tion against harmful interference in a residential installation.
Overview The CS-72A KVM (Keyboard, Video, Mouse), Switch is a control unit that allows the control of two comput ers from a single console (keyboard, monitor, and mouse).
Features M Compact Vertical-Standing Design M Custom Connector Layout Requires Only 3 Ports - 2 SPDB-15 Female Connectors for Connecting to the Computers - Plus A Single, Integrated, SPDB-15 Male Conn.
System Requirements Console M A VGA, SVGA, or Mult isync monit or capable of the highest resolution that you will be using on any computer in the installation M A PS/2 style keyboard M A PS/2 style mouse Computers The following equipment must be installed on each computer that is to be connected to the system: M A VGA, SVGA or Multisync port .
Cables Only CS Custom cable sets specifically designed to work with this switch may be used. One Console Connector Cable and two 1.2m KVM cable sets are provided with this package. KVM cable sets are also available in 1.8 and 3 m lengths. If you need additional cables, contact your dealer.
Components Front View: 1. Port Selection Switch es M Press a switch to give the KVM focus to the system attached to its corresponding port. M Pressing Buttons 1 and 2 simultaneously for 3 seconds starts Auto Scan Mode (see p.
Rear / Bottom View 1. CPU Port Connectors* The KVM cables that connect the unit to the mouse, keyboard, and video ports on the computers you are connecting up can plug into any available port. 2. Console Port Connecto r* The Console Adapter Cable plugs in here.
Installation The CS-72A can either lay flat on the desktop or stand upright. To have it stand upright, unsnap its mounting st and from the bottom of the unit; turn it 90 o ; and snap it back int o place. See the photo on the front page for an example.
Note: 1. In order to fit into the jack, the power adapter cable should have an L shaped plug. 2. The power adapter should be DC9V with the inside positive and the outside negative: - 8 - 1 2 3 4 2003-.
Operation Controlling the computers in your CS-72A installation from a single console could not be easier. Two port selection methods that provide instant access to the computers are available: M Manu.
Auto Scan Mode: The CS-72A ’ s Auto Scan feature automatically swit ches between the two ports at regular 5 seconds intervals so that you can monitor the computer activity without having to take the trouble of switching yourself. To invoke Auto Scan Mode hold down both Port Selection buttons for 3 seconds (see p.
Specifications Function Specification CPU Ports 2 Port Selection Push Button Switches; Hotkeys Connectors CPU 2 x SPDB-15 F (Yellow) Console 1 x SPDB-15 M (Yellow) LEDs 2 Selected Port (Green) Emulation Keyboard PS/2 Mouse PS/2 Scan Interval 5 secs.
Troubleshooting Symptom Cause Action Keyboard 1 and/or Mouse 2 Not Responding Loose cables. Check all cable connections to make sure they are completely seated in their sockets. Master View is in Auto Scan Mode. Press either Port Selection switch or the Spacebar to exit Auto Scan Mode.
Troubleshooting Notes: 1. The unit is designed to work with AT and PS/2 keyboards. Older XT (84 key) and some older AT keyboards (those with the function keys on the side), will not work. 2. Some Notebooks, notably the IBM Thinkpad and Toshiba Tecra, have trouble when their mouse and keyboard ports are used simultaneously.
Limited Warranty IN NO EVENT SHA LL THE DIRECT VENDOR ’ S LIABILITY E XCEED THE PRICE PA ID FOR THE PRODUCT FROM DIRECT, INDIRECT, SPECIAL, INCIDE NTAL, OR CONSEQUENTIA L DAMAGES RESULTING FROM THE USE OF THE P RODUCT, DISK, OR ITS DOCUMENTATION.
An important point after buying a device ATEN Technology CS-72A (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought ATEN Technology CS-72A yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data ATEN Technology CS-72A - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, ATEN Technology CS-72A you will learn all the available features of the product, as well as information on its operation. The information that you get ATEN Technology CS-72A will certainly help you make a decision on the purchase.
If you already are a holder of ATEN Technology CS-72A, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime ATEN Technology CS-72A.
However, one of the most important roles played by the user manual is to help in solving problems with ATEN Technology CS-72A. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device ATEN Technology CS-72A along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
