Instruction/ maintenance manual of the product CE-250 ATEN Technology
Go to page of 16
User Manual CE-250 Read this guide thoroughly and follow the installation and operation procedures carefully in order to prevent any damage to the units and/or any devices that connect to them.
Note: This equipment has been tested and found to comply wi th the limits for a Class B digital dev ice, pursuant to Part 15 of the FCC Rules. These limits are designed to prov ide reasonable protection against harmful interference in a resid entia l inst alla tion.
Overview Because the CE-250 K VM Extender System allows access to a computer system from a remote consol e (keyboard, monitor, and mouse), it is perfec t for factory and cons truction sites , or any t.
Features M Built-in AS IC for Greater Reliability and Compatibi lity M Category 5 Ethernet Cable to Connec t the Local and Remote Units - Up To 150 m Apart M Dual Console Operati on - Control Your Sys.
Computers The following equipment mus t be installed on each c omputer that is to be connected to the system: M With PS/2 Type Connectors: M A VGA, SVGA or Multisync card. M A 6-pin mini -DIN mouse port M A 6-pin mini-DIN k eyboard port M With AT Type Connectors: M A VGA, SVGA or Multisync card.
Components The Local Unit (CE-250L) Front View: 1. Operating Mode Selection Switch Pressing this button toggles between the operating mode choices: M Local: only the l ocal console c an control the system(s ); M Auto: both consol es can control the s ystem(s).
The Local Unit (CE-250L) Rear View: 1. Monitor Port The HDB-15 Video connec tor of the KVM cable that c onnects to the computer ’ s Video port plugs into this connector. 2. Keyboard Port The Keyboard connector of the K VM cable that c onnects to the computer ’ s Keyboard port plugs into this connector.
The Remote Unit (CE-250R) Front View: 1. LEDs The Remote Unit has two LEDs (Power and On Line) to indicate the operating status of the Loc al and Remote units (see p. 9, for detai ls). 2. Mouse Port The remote PS/2 mouse plugs into this connec tor. 3.
Installation Setting up the KVM E xtender System is si mply a matter of plugging in the cables: 1. Make sure that all the equi pment to be connected up is powered Off. 2. Plug the cables from the local cons ole devices (mous e, keyboard, monitor), into their ports on the Console side of the Loc al Unit (CE-250L).
- 8 - CE-250L Rear View CE-250L F rontVie w CE-250R C O N S O L E R E M O T E I /O AC 9V CPU CONSOLE REMOTE I /O AC 9V 2002-12-16.
Operation The Local and Remote Units each have two LEDs to i ndicate their operating status, as shown in the tables, bel ow: CE-250L (Local Unit): LED Operating Mode Local Auto Local Lights to indicate that the local console is active (the Remote LED is out).
Troubleshooting Symptom Action No Video Make sure that all cables are securely plugged into their sockets. TP Wiring Diagram TP Pin Assignments Pin Assignment 1 V OUT B 2 /V OUT B 3 V OUT G 4 V OUT R .
Specifications Function CE-250L CE-250R Connectors Keyboard 2 x 6 pin mini-DIN female 6 pin mini-DIN female Mouse 2 x 6 pin mini-DIN female 6 pin mini-DIN female Monitor 1 x 15 pin HDB male 1 x 15 pin.
Limited Warranty IN NO EVENT SHA LL THE DIRECT VENDOR ’ S LIABILITY EX CEED THE PRICE PA ID FOR THE PRODUCT FROM DIRECT, INDIRECT, SPECIAL, INCIDE NTAL, OR CONSEQUENTIAL DA MAGES RESULTING FROM THE USE OF THE P RODUCT, DISK, OR ITS DOCUMENTATION.
Notes: - 13 - 2002-12-16.
Notes: - 14 - 2002-12-16.
An important point after buying a device ATEN Technology CE-250 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought ATEN Technology CE-250 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data ATEN Technology CE-250 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, ATEN Technology CE-250 you will learn all the available features of the product, as well as information on its operation. The information that you get ATEN Technology CE-250 will certainly help you make a decision on the purchase.
If you already are a holder of ATEN Technology CE-250, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime ATEN Technology CE-250.
However, one of the most important roles played by the user manual is to help in solving problems with ATEN Technology CE-250. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device ATEN Technology CE-250 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
