Instruction/ maintenance manual of the product CE-250 ATEN
Go to page of 11
KVM Extender CE-250 User Manual Read this manual thoroughly and follow the installation procedures carefully to prevent any damage to the CE-250 and/or the devices it connects to.
Packing Checklist 1 x CE-250L KVM Extender Local Unit 1 x CE-250R KVM Extender Remote Unit 1 x CS Custom KVM Cable 2 x Power Adapters 1 x User Manual 1 x Quick Start Guide If anything is damaged or missing, contact your dealer .
The CE-250 features a custom ASIC to ensure the utmost in reliability and compatibility, and can also sense the distance to the system, and automatically adjust the gain to compensate. Setup is as easy as can be - simply connect the computer system box and local console to the Local CE-250 Module; run the Cat.
Computers The following equipment must be installed on each computer that is to be connected to the system: With PS/2 Type Connectors: A VGA, SVGA or Multi sync card. A 6-pin mini-DIN mouse port. A 6-pin mini-DIN keyboard port. With AT Type Connectors: A VGA, SVGA or Multi sync card.
1. Operating Mode Selection Switch Pressing this button cycles you through the operating mode choices: Local: only the local console can control the system(s); Auto: both consoles can control the system(s)). 2. LEDs The Local Unit has two LEDs to indicate the Operating Status of the Local and Remote units.
1. Monitor Port The HDB-15 Video connector of the KVM cable that connects to the computer's Video port plugs into this connector. 2. Keyboard Port The keyboard connector of the KVM cable that connects to the computer's Video port plugs into this connector.
1. LEDs The Remote Unit has two LEDs (Power and On Line) to indicate the Operating Status of the Local and Remote units. 2. Mouse Port The remote PS/2 mouse plugs into this connector. 3. Keyboard Port The remote PS/2 keyboard plugs into this connector.
8. Plug the cables from the remote console devices (mouse, keyboard, monitor), into their ports on the Console side of the CE-250R. Each port is marked with an appropriate icon to indicate itself. 9. Plug the second power adapter (supplie d with this package) into an AC source; plug the adapter's power cable into the CE-250R's Power Jack.
Operating Mode LED Local Auto Local Lights to indicate that the local console is active (the Remote LED is out). 1. Lights when the local console is active (the Remote LED is out). 2. Turns off when the remote console is active (the Remote LED turns on) 3.
No Video Make sure that all cables are securely plugged into their sockets. TP Wiring Diagram TP Pin Assignments Pin Assignment 1 V OUT B 2 /V OUT B 3 V OUT G 4 V OUT R 5 /V OUT R 6 /V OUT G 7 /DO 8 D.
Video Resolution 1280 x 1024; DDC; DDC2; DDC2B * Power Consumption AC 9V 2.7W (max.) Operating Temp. 5 to 40° C Storage Temp. -20 to -60° C Humidity 0 - 80% Housing Plastic Weight 300 g 220 g Dimensions (L x W x H) 130 x 100 x 35 mm 100 x 80 x 35 mm * DDC, DDC2, and DDC2B support is for the Local monitor only.
An important point after buying a device ATEN CE-250 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought ATEN CE-250 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data ATEN CE-250 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, ATEN CE-250 you will learn all the available features of the product, as well as information on its operation. The information that you get ATEN CE-250 will certainly help you make a decision on the purchase.
If you already are a holder of ATEN CE-250, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime ATEN CE-250.
However, one of the most important roles played by the user manual is to help in solving problems with ATEN CE-250. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device ATEN CE-250 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
