Instruction/ maintenance manual of the product PRO III Atech Flash Technology
Go to page of 6
AtechFlash T echnology , Inc. www .atechflash.com Table of Content 1. Introduction...........................................1 2. Key Features........................................2 3. System Requirement............................3 4. Cable Description.
Introduction Features System Requirements Operating System Requirement Windows 98* Windows 98SE* Windows ME Windows 2000* Windows XP * A CD ROM Drive is also required to access PRO III Setup CD when setting up PRO III on Windows 98 / 98SE / 2000 For External Setup IBM PC compatible computer with USB port (USB 1.
Cable Description Cable Description Before Installation Depending on which version you have purchased, following cables may be included in your PRO III multiple card reader / writer package. Before attempting to connect, please read this manual carefully and determine if software driver setup is required first.
Hardware Setup Hardware Setup Windows 98, Windows 98SE or Windows 2000 users Please perform software setup first before proceeding to hardware setup. External Setup T o set up PRO III reader externally, simply use External USB cable to connect PRO III reader to the USB 1.
Hardware Setup Hardware Setup Hardware Setup 1 1 10 12 Depending on the pin layout on your motherboard USB header , it may be necessary rearrange the color wires of Internal USB cable to match the USB pin assignment. Please refer to your motherboard manual for USB header pin assignment information.
1394 MS CF/MD PRO III SM SD/MMC Using PRO III Specifications 13 14 Once PRO III reader is setup successfully , you shall have 4 Removable Disk icons created in My Computer . Each of the icons allows you to access the flash media card in the card slot it represents.
An important point after buying a device Atech Flash Technology PRO III (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Atech Flash Technology PRO III yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Atech Flash Technology PRO III - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Atech Flash Technology PRO III you will learn all the available features of the product, as well as information on its operation. The information that you get Atech Flash Technology PRO III will certainly help you make a decision on the purchase.
If you already are a holder of Atech Flash Technology PRO III, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Atech Flash Technology PRO III.
However, one of the most important roles played by the user manual is to help in solving problems with Atech Flash Technology PRO III. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Atech Flash Technology PRO III along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center