Instruction/ maintenance manual of the product SPIRIT Attendant AT&T
Go to page of 17
AT&T SPlRIT ® Communications System SPIRIT Attendant ConnecT/R Owner’s Manual.
IMPORTANT SAFETY INSTRUCTIONS To reduce risk of injury from fire or electric shock, always follow bask safety precautions when using this product. The safety symbol (exclamation point inside a triangle) on the Attendant ConnecT/R alerts you to the Important operat- ing and maintenance instructions below.
manual. If you cannot resolve the problem, or if the product is damaged, Call the AT&T Helpline at 1-800-628-2888. Do not open the product. Opening the product may expose you to dangerous voltages or other risks. 10. During thunderstorms, avoid using tele- phones except cordless models.
Table of Contents Introduction 1 Installation 3 Step 1— Mount the SPIRIT ® Attendant ConnecT/R 4 Step 2—Connect the SPIRIT Attendant ConnecT/R 5 Step 3—Test the Equipment 7 Troubleshooting 8 Ap.
Introduction The following descriptions define important terms used in this manual. ● The SPIRIT Attendant is a device which provides automated call-handling capabili- ties for the SPIRIT Communications System.
2 Figure 2. SPIRIT Attendant ConnectT/R Applications.
Installation 1. 2. INSTALLATION INSTRUCTIONS 3. Never touch uninsulated telephone wires or terminals unless the telephone line has been Never install telephone wiring during a disconnected at the network interface. Iightning storm. 4. Use caution when installing or modifying Never install telephone jacks in wet loca- telephone lines.
4 Step 1 — Mount the SPIRIT Attendant ConnecT/R (optional). The SPIRIT Attendant ConnecT/R is designed to be placed on your desk or mounted on any vertical surface. Do not place it on the floor. Hardware has been included to mount the SPIRIT Attendant ConnecT/R on the wall: two plastic wall-mount tabs, two anchors, and two #6 screws.
studs or cross members), partially screw the two screws into the wall at the marks, remove them, hang the tabs on the screws, and then tighten the screws. For plaster, plasterboard, cinder block, or brick surfaces, drill a 3/16" hole at each mark and insert an anchor into each of the holes.
6 1. Connect the SPIRIT Attendant ConnecT/R to the Controller. Using 4-wire cord, plug one end into the CTRLR jack on the back of the SPIRIT Attendant ConnecT/R and connect the other end into the STATION jack on the controller. 2. Connect the SPIRIT Attendant to the SPIRIT Attendant ConnecT/R.
NOTE: Use only a UL Listed wall plug-in power transformer that has Class 2 outputs and the following characteristics: Input rating: 99-127 V AC rms 60 llz 150 mA maximum 0utput rating: 27-35 V DC at 200 mA 14-18 V DC at 200 mA The power transformer supplied with the ConntecT/R has these characteristics.
8 Troubleshooting This section should help you determine the device operates. Call the AT&T Helpline at cause of problems you might encounter and 1-800-628-2888 if you need assistance.
Appendix A — Wiring Requirements Note the following cabling requirements before 104386545). In addition, you will need a connecting the equipment. If these limits (which Building Entrance Protector, which can are the same ones that apply to our current house up to six 4C1S Block Protectors.
Appendix B — Limited Product Warranty and Limitation of Liability AT&T warrants that the product will be free from defects in material and workmanship for one year from the date of purchase.
Index AT&T Helpline 8 Controller 1 CTRLR jack 6 Installation 3 Connect the ConnecT/R 5 Connect the SPIRIT Attendant 6 Mount the ConnecT/R 4 Test the equipment 7 POWER jack 6 Power Transformer 6 Sa.
FCC Warning Statement This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful Interference when the equipment is operated in a commercial environment.
518-453-71 2.
An important point after buying a device AT&T SPIRIT Attendant (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought AT&T SPIRIT Attendant yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data AT&T SPIRIT Attendant - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, AT&T SPIRIT Attendant you will learn all the available features of the product, as well as information on its operation. The information that you get AT&T SPIRIT Attendant will certainly help you make a decision on the purchase.
If you already are a holder of AT&T SPIRIT Attendant, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime AT&T SPIRIT Attendant.
However, one of the most important roles played by the user manual is to help in solving problems with AT&T SPIRIT Attendant. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device AT&T SPIRIT Attendant along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
