Instruction/ maintenance manual of the product E2662B AT&T
Go to page of 8
User Manual (P ar t 2) 2.4 GHz Expansion Handset E262 F or use with A T&T model E2562 / E2662B 91-5676-10-00_E262Manual_R0FEB2704.qxd 2/27/2004 12:41 PM Page 1.
T able of contents Copyright © 2004 Advanced American Telephones. All Rights Reserved. AT&T and the Globe Design are trademarks of AT&T Corp., licensed to Advanced American Telephones. STOP! See pages 2-3 for easy instructions. You must charge the battery and register the handset before use.
1 Befor e y ou begin This cordless telephone operates with the maximum power allowed by the Federal Communications Commission (FCC). Even so, this handset and E2562 / E2662B base can communicate over only a certain distance — which can vary with the locations of the base and handset, the weather, and the con- struction of your home or office.
2 Light remains on while battery is charging. LOW BATTERY RDL MEM MENU Batter y & charg er installation After installation, place the handset in the charger and allow the battery to charge for 12 hours before use. You can keep the battery charged by returning the handset to the charger after each use.
3 Registering the handset Before using your new handset, you must register it with the E2562 / E2662B base. During registration, you must enter the 15-digit ID number of the telephone base. To find this number, go to the base , press MENU , scroll down to select DISPLAY BASE ID , then press OK .
4 Belt clip & optional headset Install belt clip as shown below if desired. For hands-free telephone conversations, you can use any industry standard 2.5 mm headset (purchased separately). For best results use an AT&T 2.5 mm headset. Plug 2.5 mm headset into jack on side of handset (beneath small rubber cap).
5 Quick r eference guide For complete instructions, please refer to the manual provided with your E2562 / E2662B telephone. Off/Clear During a call, press to hang up. While using menus, press to cancel an operation, back up to the previous menu, or exit the menu display.
Copyright © 2004 Advanced American Telephones. All Rights Reserved. AT&T and the Globe Design are trademarks of AT&T Corp., licensed to Advanced American Telephones. Printed in China. Issue 1 AT&T 02/04. 91-5676-10-00 www .telephones.att.
An important point after buying a device AT&T E2662B (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought AT&T E2662B yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data AT&T E2662B - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, AT&T E2662B you will learn all the available features of the product, as well as information on its operation. The information that you get AT&T E2662B will certainly help you make a decision on the purchase.
If you already are a holder of AT&T E2662B, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime AT&T E2662B.
However, one of the most important roles played by the user manual is to help in solving problems with AT&T E2662B. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device AT&T E2662B along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
