EN
Phase Technology logo
Official user manual

Phase Technology SPF-15

2 pages·201 KB·Speaker·PDF·ENDEFRITNLJA
Phase Technology SPF-15
Page 1 of the Phase Technology SPF-15 user manual
Page 1 · click to enlarge
Page 1
Phase Technology SPF-15 diagram (page 1)
Fig. 1

T E C H N O L O G Y SPF-15 Install instructions for SPF Outdoor models:

Phase Technology SPF-15 diagram (page 1)
Fig. 2

Thank you for choosing Phase Technology speakers. We know there are a wide variety of choices available today, and we sincerely appreciate your purchase of our product. Phase Technology speakers are built to exacting standards and will provide many years of listening enjoyment.

Regardless of application, serious audiophile listening or home theater, we recommend that you take the time to read this manual thoroughly before connecting speakers to your amplifier or receiver. In the highly unlikely event that you should experience a problem with set-up or operation, please contact one of our authorized dealers for assistance, or contact us directly.

Our speakers are the result of over five decades of designing and manufacturing. We hold many key patents in loudspeaker technology including the soft-dome tweeter. Our mission, our passion is to constantly advance the art and science of accurate audio reproduction. Our dedication insures your new speakers will accurately reproduce all the impact, detail and delicacy of today’s digital technology.

We trust that your new Phase Technology speakers will enrich your enjoyment of music and movies beyond your expectations.

Box contents · 1 Speaker

Page 2 of the Phase Technology SPF-15 user manual
Page 2 · click to enlarge
Page 2
Phase Technology SPF-15 diagram (page 2)
Fig. 3
2. Connect speaker wire leads to the terminal screws on the back of the base plate. Polarity is indicated.

3a. If mounting the speaker directly over the wire, ensure the base plate covers the hole in wall.

3b. If mounting speaker offset from wiring point, run wire out hole in wall and behind base plate through 2 mm standoff gap between base plate and wall. The standoff gap accepts up to 18 gauge flat signal wire.

Phase Technology SPF-15 diagram (page 2)
Fig. 4
4. Choose a secure mounting surface with sufficient strength to reliably hold the speaker.
5. Attach speaker to surface using installer-supplied fasteners.
6. Aim speaker by pointing it up or down and/or rotating it.
7. Done!

8650 College Boulevard / Overland Park, KS 66215 / (888)PHASE TK / www.phasetech.com / www.mseaudio.com

Sources

References & links

Pages referenced in this manual — manufacturer, support and downloads.

Ask about the Phase Technology SPF-15

Owners and our team usually reply within a day — and your question helps the next person too.

Add your email to get notified when it’s answered — no spam, ever.

0 questions
No questions yet about the Phase Technology SPF-15

Be the first to ask — other owners or our team will answer.

Original document

Phase Technology SPF-15 manual PDF

2 pages·201 KB·Speaker·PDF
Click any page above to open it here
Page 1 / …
100%
Loading pages…