EN
Phase Technology logo
Official user manual

Phase Technology IW500B

4 pages·779 KB·Speaker·PDF·ENDEFRITNLJA
Phase Technology IW500B
Table of Contents 22 sections Specifications: IW500b · System Type · Impedance (nominal) 1 · Sensitivity dB @ 2.83V/1M Sensitivity dB @ 1W/1M 2 · … ShowHide
Page 1 of the Phase Technology IW500B user manual — Applications
Page 1 · click to enlarge
Page 1
  • Key Features
  • BroadBeam® waveguide technology delivers a consistent dispersion pattern up to 10 kHz for maximum coverage area per speaker (EASE™ documented).
  • One 133 mm (5.25 in) polypropylene woofer and one 25 mm (1 in) convex aluminum tweeter with FerroFluid cooling mounted to an M5 Motorboard.
  • 106.5 dB Max. SPL offers high output capabilities and reduced amplification costs.
  • Rapid installation blind-mount system for quick and secure installation.
  • Easy-access 6-position tap switch for 25, 70.7 & 100 Volt applications with voice coil/8 Ohm direct simplifies ordering & inventory tracking.
  • Integrated UL-listed steel enclosure with conduit connections.
  • Included accessories: Mounting hardware, paint mask, hole template and conduit connector.
  • Optional accessory: Pre-construction bracket (AC-IW5-PCB).
  • High-quality white paint finish. Custom paint colors optional.
Phase Technology IW500B — Specifications: IW500b diagram (page 1)
Fig. 1 · Specifications: IW500b

Specifications: IW500b

System Type

5.25" Coax, in wall, sealed (32 Watt transformer for 25/70.7/100 Volt or 8 Ohm direct) 8 ohm 87.5 dB 87.5 dB 140 Hz - 22 kHz 69 Hz - 22 kHz 150w 75w 106.5 dB 90º horizontal / 100º vertical 70º horizontal / 85º vertical 115º horizontal / 115º vertical 4.9 (Avg. 100 Hz - 10 kHz) / 8.3 ( 2 kHz) 6.0dB (Avg. 100 Hz - 10kHz) /9.2dB (2 kHz) 6-Position rotary switch with 8 ohm direct

Impedance (nominal) 1

Sensitivity dB @ 2.83V/1M Sensitivity dB @ 1W/1M 2

Frequency Response (- 3 dB) 3

Frequency Response (-10 dB) 3

Max. Program Power 4

Max. Continuous Power RMS 5

Max. Power SPL @ 1 M 6

Coverage Angle (-6 dB @ 2 kHz) Coverage Angle (-6 dB @ 10 kHz)

Coverage Angle (Avg. from 2 to 10 kHz) Directivity Factor (Q) Directivity Index (DI) dB Tap Selector Transducer - Low Frequency Driver Transducer - High Frequency Driver Low Frequency Voice Coil Crossover Frequency Network Type: Low Pass Network Type: High Pass Motor-board Grille Inputs Colors Height Width Depth Weight Shipping Weight Included Accessories Optional Accessories Packaging Regulatory - UL Regulatory - CE

1 x 133 mm (5.25 in) Polypropylene cone, butyl rubber surround 25mm (1in) Convex aluminum tweeter with waveguide 25.4 mm / 1.00 in 3.0 kHz 12 dB per octave, 2nd order 12 dB per octave, 2nd order Cast aluminum Iridite-plated steel with powder-coat finish Wire leads White (only), Paintable 11.84 in / 300.7 mm 8.64 in / 219.5 mm 3.90 in / 99.1 mm 8.9 lb / 4.0 kg 11.0 lb / 5.0 kg 1 UL listed 1/2" conduit connector, 2 wire nuts, paint mask, hole template Preconstruction bracket (AC-IW-PCB) 1 per box Backcan listed to UL1480 Approved Transformers

Description

The IW500b is a 5.25” coax in-wall loud- speaker that delivers effective low-end response (69 Hz, -10 dB) and optimal off- axis performance (up to 10 kHz, EASE™ documented). SoundTube’s proprietary BroadBeam® waveguide tweeter system delivers consistent high-performance audio across the operating bandwidth. The IW500b speaker design incorporates a low-profile grille and 6-position tap switch with an 8 Ohm bypass. Mounting hardware is included and features a fast and secure optimally engineered constant- tension mounting system and an inte- grated backcan for maximum efficiency and applications where UL approval is required. A pre-construction bracket is offered as an optional accessory.

Impedance listed per IEC 60268-5 with a minimum less than 80% the nominal impedance

70.7 V Output 100 V Output 25 V Output

1w1m sensitivity determined using nominal impedance

33 w 102.5 dB 17 w 100.0 dB 9 w 97.0 dB 6 w 95.5 dB 3 w 92.5 dB

33 w 102.5 dB 17 w 100.0 dB 9 w 97.0 dB 6 w 95.5 dB

5 w 94.5 dB 2.5 w 91.5 dB 1.3 w 88.5 dB 0.63 w 85.5 dB

Frequency response measured in half or full space as dictated by speaker mounting configuration

Applications

Max program power is 3 dB above max continuous power

Designed for in-wall applications, the IW500b is ideal for music and messaging in boardroom, church, corporate A/V and education applications. For additional bass response down to 41 Hz (-10 dB), the CM1001d subwoofer may be used.

Continuous power rating, EIA-426-B test Max output based on max continuous power Max useable SPL based on testing by NWAA Labs

© 2008 SoundTube Entertainment. All rights reserved. PN-TS-CMEZ REV 11.04.08

Page 2 of the Phase Technology IW500B user manual — Graphs and Plots
Page 2 · click to enlarge
Page 2

com) using their proprietary MACH testing system. All data is collected and analysed according to ASTM, ISO and AES standards using EASERA, TEF and MLSSA. Full balloon data including both phase and magnitude is compiled into a variety of formats including EASE 4.x, GLL and CLF.

Patented SoundTube Technologies

coil/8 Ohm direct. The frequency- dividing network shall have a cross- over frequency of 3 kHz with slopes of 12 dB per octave (second order) for both low and high-pass filters. Rated power capacity shall be at least 75 Watts continuous power (RMS) and conform to EIA-426-B testing. Maxi- mum continuous output at 1 meter shall be 106.5 dB.

SoundTube Entertainment and the MSE Audio Group constantly develop new technologies which enhance audio product performance. SoundTube Enter- tainment innovations are protected by multiple U.S. & international patents, which explicitly cover SoundTube dome, enclosure and dispersion technologies. The MSE Audio Group actively defends its patents in order to protect SoundTube resellers and end-users.

Architectural Specifications

Installation for the IW500b shall be by 4-screw, constant-tension optimally engineered mounting assembly. The external wiring input connector shall be by hard wired leads for 8 Ohm or distributed systems.

The loudspeaker shall consist of a 133 mm (5.25 in) low-frequency transducer and a 25 mm (1 in) high- frequency transducer with a frequency- dividing network installed in a sealed enclosure. The low-frequency trans- ducer shall have a polypropylene cone with a butyl rubber surround. The high-frequency transducer shall be constructed of aluminum with a pro- prietary BroadBeam® waveguide.

Technical Data and Specification Tools

The grille shall be constructed of powder-coated steel for lasting per- formance and attach via pressure fit directly to the ABS bezel. The backcan shall be constructed of drawn steel.

Technical Data

SoundTube Entertainment strives to provide complete and effective techni- cal information and data to dealers, engineers and designers. All data are available from SoundTube Entertain- ment or at www.soundtube.com and includes EASE™ Data – 3-D polar plots and SoundTubeSPEC™ – Proprietary SoundTube speaker placement software.

The system shall be the SoundTube IW500b with mounting hardware for both low & high impedance applica- tions. SoundTube Entertainment

The low-frequency voice coil diameter shall be 25.4 mm (1 in).

Performance specifications of a typical production unit shall be as follows: Useable frequency response shall extend from 69 Hz – 22 kHz (-10 dB, half space, no external equaliza- tion). Measured sensitivity (2.83 Volt, 1 meter) shall be at least 87.5 dB. The speaker shall have a nominal imped- ance of 8 Ohms and shall be available for 25/70.7/100 Volt modes with voice

6430 North Business Park Loop Park City, Utah 84098 Phone 435.647.9555 Fax 435.647.9666 Toll Free 800.647.TUBE www.soundtube.com

Independent Data Acquisition and Verification All data for SoundTube speakers are independently collected from and veri- fied by NWAA Labs (www.nwaalabs.

Graphs and Plots

Phase/Impedance Reponse Frequency Response

Phase Technology IW500B — Graphs and Plots diagram (page 2)
Fig. 2 · Graphs and Plots
Phase Technology IW500B — Graphs and Plots diagram (page 2)
Fig. 3 · Graphs and Plots
Show 5 more labels / short text on this page
Phase(Degrees) · dBSPL · Ohms · Hertz · Hertz
Page 3 of the Phase Technology IW500B user manual — Directivity Index (DI)
Page 3 · click to enlarge
Page 3

Horizontal Beamwidth

Phase Technology IW500B — Horizontal Beamwidth diagram (page 3)
Fig. 4 · Horizontal Beamwidth

Vertical Beamwidth

Phase Technology IW500B — Vertical Beamwidth diagram (page 3)
Fig. 5 · Vertical Beamwidth

Directivity Index (DI)

Phase Technology IW500B — Directivity Index (DI) diagram (page 3)
Fig. 6 · Directivity Index (DI)
Show 6 more labels / short text on this page
Degrees · Hertz · Degrees · Hertz · dB · Hertz
Page 4 of the Phase Technology IW500B user manual — 1,000 Hz 500 Hz 250 Hz 125 Hz 0
Page 4 · click to enlarge
Page 4
Phase Technology IW500B — 1,000 Hz 500 Hz 250 Hz 125 Hz 0 diagram (page 4)
Fig. 7 · 1,000 Hz 500 Hz 250 Hz 125 Hz 0

1,000 Hz 500 Hz 250 Hz 125 Hz 0

Technical data, EASE™ plots, SoundTubeSPEC™ software & product downloads available at www.soundtube.com

Phase Technology IW500B — 1,000 Hz 500 Hz 250 Hz 125 Hz 0 diagram (page 4)
Fig. 8 · 1,000 Hz 500 Hz 250 Hz 125 Hz 0
Phase Technology IW500B — 1,000 Hz 500 Hz 250 Hz 125 Hz 0 diagram (page 4)
Fig. 9 · 1,000 Hz 500 Hz 250 Hz 125 Hz 0
  • SoundTube Entertainment manufactures a complete line of speakers for: Open-Ceiling
  • In-Ceiling
  • Surface-Mount
  • Outdoor
  • Sound-Focusing

All SoundTube products are designed and engineered in the USA.

Sources

References & links

Pages referenced in this manual — manufacturer, support and downloads.

Ask about the Phase Technology IW500B

Owners and our team usually reply within a day — and your question helps the next person too.

Add your email to get notified when it’s answered — no spam, ever.

0 questions
No questions yet about the Phase Technology IW500B

Be the first to ask — other owners or our team will answer.

Original document

Phase Technology IW500B manual PDF

4 pages·779 KB·Speaker·PDF
Click any page above to open it here
Page 1 / …
100%
Loading pages…