Instruction/ maintenance manual of the product 7610 AT&T
Go to page of 14
Part 2 © 1998 Philips Consumer Communications L.P . All rights reserved. Printed in Mexico. 848233037 Issue 1A T&T User's Manual for Cordless Answering System T elephone 7610 Fold open this manual for information about this telephone's installation and operation.
INST ALLA TION AC Adapter Modular W all Jack Standar d AC Outlet Power Cor d T elephone Line Cor d Plug the other end of the line cord into a modular phone jack.
INST ALLA TION CHARGING HANDSET IN USE MEMO/REWIND FAST FWD SAVE CLOCK PLAY/ST OP VOLUME Use with other buttons to change settings. Base Antenna (extended) Recor d or play outgoing announcement. Cover T urn system on or off. Lift panel door to access featur es (see figur e at right).
BA TTERIES 3 Charging the Handset Battery Pack The batteries need charging when: • The phone beeps four times when you press P . • The LOW BA TTER Y light on the handset flashes on and off. • The phone does not respond when you press P , and no lights go on.
IN CASE OF DIFFICUL TY • Place the handset in the base, and check to make sure the CHARGING light is on. Unplug the AC adapter from the outlet, wait 15 seconds, then plug it in again. The CHARGING light should go on. W ait another 15 seconds, then pick up the handset and press P .
IN CASE OF DIFFICUL TY If you have difficulty hearing messages • If messages are garbled, the recording heads may be soiled and should be cleaned. • Unplug the system from the electrical outlet.
OPERA TION Making A Call 1 Press P , and wait for the PHONE light to go on steadily . 2 When you hear a dial tone, dial the number . NOTE: Y ou might experience a slight delay befor e you hear a dial tone, as the AutoSelect featur e sear ches for a clear channel.
MEMOR Y This cordless phone can store 10 telephone numbers that you can dial just by pressing p and one of the number buttons. Additionally , the phone of fers a memory location accessed by pressing m . Storing Speed-Dial Numbers 1 Make sure the PHONE light is off.
8 OPERA TING RANGE This cordless telephone operates at the maximum power allowed by the Federal Communications Commission (FCC). Even so, the handset and base can communicate over only a certain distance — which can vary with the locations of the base and handset, the weather , and the construction of your home or office.
9 V olume Control Use the volume control on the side of the base to adjust the answering system volume. Slide the control up toward the back of the base to increase volume while listening to your announcement or messages, or down toward the bottom of the base to decrease volume.
ANSWERING SYSTEM OPERA TION Ring Select Use the Ring Select switch on the back side of the base unit to select how many times the line will ring before the system answers a call.
FROM A REMOTE TOUCH TONE PHONE Remote Access Code The Remote Access Code is a 3-digit code which lets you access your answering system away from your home or of fice. The factory setting is 123 (printed under the microcassette lid on the base). Y ou can change this code to any 3-digit number between 100 and 999, except 323 and 523.
© 1998 Philips Consumer Communications, L. P . All rights reserved. Printed in Mexico. 848233052 Issue 1 A TT Answering System 7610 Operation From a Remote T ouch T one Phone T o access you r answering system: 1 Dial your telephone numbe r . 2 When the system answers, enter your 3-digit Remot e Access Code .
COMMAND PRESS Play all messages 1 Play only new messages 2 Replay messages 1 after playing messages Rewind Hold down 4 ; release to pla y . Fast Forward Hol d down 6 ; release to pla y . Clear messages 3 , 3 . Stop 5 ; press 1 to pla y . Record announcement 7 , , speak after long beep, press 5 to stop.
An important point after buying a device AT&T 7610 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought AT&T 7610 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data AT&T 7610 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, AT&T 7610 you will learn all the available features of the product, as well as information on its operation. The information that you get AT&T 7610 will certainly help you make a decision on the purchase.
If you already are a holder of AT&T 7610, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime AT&T 7610.
However, one of the most important roles played by the user manual is to help in solving problems with AT&T 7610. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device AT&T 7610 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
