Instruction/ maintenance manual of the product 63134-2 Perlick
Go to page of 8
INST ALLA TION AND OPERA TION INSTRUCTIONS BEER PUMP P ANELS T able of Contents Installing the Panel ..............................................2 Panel Diagram .....................................................3 How to Operate the Beer Panel....
2 Perlick is committed to continuous improvement. Therefore, we reserve the right to change specifications without prior notice. Installation – Beer Pump Panels ■ Use panel as a template to mark where holes should be drilled on cooler wall. (Note: Make sure panel is level and pumps are in the vertical position).
3 Perlick is committed to continuous improvement. Therefore, we reserve the right to change specifications without prior notice. Diagram – Beer Pump Panel Diagram.
4 Perlick is committed to continuous improvement. Therefore, we reserve the right to change specifications without prior notice. How to Operate – Beer Pump Panels ■ Adjust primary CO 2 regulator by turning adjusting screw counterclockwise until it turns freely , then turn hand valve counterclockwise on CO 2 cylinder to the fully open position.
5 Perlick is committed to continuous improvement. Therefore, we reserve the right to change specifications without prior notice. Diagram #2 – Beer Pump.
6 Perlick is committed to continuous improvement. Therefore, we reserve the right to change specifications without prior notice. Diagram #3 – Cleaning Diagram.
General Information ■ The cleaning of beer lines with the new integral flow reversal feature incorporated into the Perlick Beer Pump gives the line cleaner numerous configurations for line cleaning.
Form No. Z2149A Rev . 08.24.04 8300 West Good Hope Road • Milwaukee, WI 53223 • Phone 414-353-7060 • Fax 414-353-7069 T oll Free 800-558-5592 • E-Mail: Perlick@Perlick.com • www .Perlick.com Perlick is committed to continuous improvement. Therefore, we reserve the right to change specifications without prior notice.
An important point after buying a device Perlick 63134-2 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Perlick 63134-2 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Perlick 63134-2 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Perlick 63134-2 you will learn all the available features of the product, as well as information on its operation. The information that you get Perlick 63134-2 will certainly help you make a decision on the purchase.
If you already are a holder of Perlick 63134-2, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Perlick 63134-2.
However, one of the most important roles played by the user manual is to help in solving problems with Perlick 63134-2. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Perlick 63134-2 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
