Instruction/ maintenance manual of the product RPS1630H Perle Systems
Go to page of 8
5500192-12 RPS Series Remote Power Switches Models Covered: RPS820 RPS830 RPS1620H RPS1630H Quick Start Guide.
Warnings and Cautions: Installation Instructions SECURE RACKING If Secure Racked units are installed in a closed or multi-unit rack assembly , they may require further evaluation by Certication Agencies. The following items must be considered. 1. The ambient within the rack may be greater than room ambient.
Page 3 1. Introduction This Quick Start Guide describes how to set up the Perle Remote Power Switch (RPS) with your IOLAN Device Server . If you are using the RPS as a stand- alone, see the RPS User ’ s Guide. Y ou can securely manage the power going to any electronic device through the IOLAN Device Server .
Page 4 RPS Series - Remote Power Switches; Quick Start Guide 2. Hardware Installation This Quick Start Guide assumes that you have already powered up your IOLAN Device Server according to the Device Server's Quick Start Guide.
Page 5 RPS Series - Remote Power Switches; Quick Start Guide 3. Connecting the Device Server to the RPS T o securely manage the RPS, congure the Device Server as follows: 1. Set the Line Service to Power Management for the line that is connected to the RPS serial port.
Page 6 RPS Series - Remote Power Switches; Quick Start Guide 5. T echnical Support T echnical support information can be found at the following link: www .
FCC Part 15 R egulation This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
13719-C.
An important point after buying a device Perle Systems RPS1630H (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Perle Systems RPS1630H yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Perle Systems RPS1630H - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Perle Systems RPS1630H you will learn all the available features of the product, as well as information on its operation. The information that you get Perle Systems RPS1630H will certainly help you make a decision on the purchase.
If you already are a holder of Perle Systems RPS1630H, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Perle Systems RPS1630H.
However, one of the most important roles played by the user manual is to help in solving problems with Perle Systems RPS1630H. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Perle Systems RPS1630H along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
