
Pepper Wireless Pad




The new Pepper wireless pad is a portable device that you can use to connect to the Internet anywhere a Wi-Fi® network with broadband access is available.

*Microphone/Microphone jack: not active; functionality will be added in a future update.

Because everything is stored on the Pepper pad, you can also use your pad offline to write e-mail to send later, to listen to music you have downloaded, and to view clippings from Web pages.

Color LCD with touch screen

Web Browser Directly access the Web with the Mozilla™ based browser. Keep and organize your bookmarks and Web page clippings. Shop. Read newspapers. Do research.
E-Mail Send and receive e-mail using the POP3- and IMAP4-compatible Mail application. Mail downloads all your messages to your pad from your broadband provider or corporate e-mail server, remembers every address you have sent mail to, and automatically completes known addresses.
Instant Messaging Stay in touch with your AOL® IM buddies.
Internet Radio Listen to streaming radio while you’re doing other things like writing and reading e-mail or writing in your journal.
Journal Explore your thoughts, plans, and ideas. Use the rich text editor and add Web clippings to journal pages to create a look that is uniquely your own.
TV Remote Control Control your TV, DVD, VCR, and CD players, and free yourself from a multitude of separate remote control devices.
Music, Video, and Photo Libraries Collect your digital media in the libraries, and let the libraries organize them for you. Listen to MP3s, watch MPEGs, and look at your digital photos (and slide shows, too).
Introduction 4

The first time you turn on your Pepper pad, the Pepper Setup Helper guides you through the few steps necessary to get your pad ready to use.
When you take your pad other places—to work, the airport, the library, a distant city—you’ll have to connect to new Wi-Fi networks, but this will be quick and easy.
The following sections briefly describe the setting up process and some of the features of your pad.
To charge the battery:
Charging takes less than two hours if the pad is in sleep mode or turned off. It may take up to six hours if there is a great deal of activity. The small light next to the jack is yellow while the battery is charging and green when the battery is charged and the pad is plugged in. When the pad is using the battery for power, this light is off.
Once the battery is charged, it holds the charge for approximately four hours of use or up to a week if the pad is in sleep mode or turned off. If you are using your pad for things that require little power, such as listening to music with the screen dimmed, the charge will last longer than if you are using it for activities like watching movies or browsing the Web that require more power.
You can plug your Pepper pad in at night and charge the battery while you sleep. The pad will be ready to use wherever you go the next day. The battery cannot be overcharged, so you don’t need to check on your pad while it is plugged in.

The power button is on the top right of the Pepper pad. When your pad is on, this button is lit.
You always use this button to turn the pad on.
You can also use this button to put the pad to sleep or to turn it off completely.
When you haven’t used your Pepper pad for a period of time (the default is 10 minutes), the pad goes to sleep in order to conserve the battery charge. When the pad is sleeping, the power light pulses slowly.
When you turn your pad on after it has been sleeping, everything starts up instantly exactly where it was when the pad went to sleep. After the pad has been in sleep mode, it may take up to 15 seconds to establish a connection to a wireless network.
If you know you won’t be using your pad for a half an hour or so, you may want to put it to sleep manually. To put your pad to sleep manually, press the power button briefly.

If you do turn your Pepper pad off completely, the icons for the applications you were using are still displayed at the bottom of the screen when you turn the pad on again. You can display the last page you accessed in one of these applications by just tapping its icon.
To turn your pad off, press the power button for at least three seconds.
When the pad is off, the power light is off as well.
The Pepper pad has a touch screen, and the stylus provides an easy way to make a selection or to choose a place to enter text.
Use the stylus with the touch screen as you would use a mouse. A tap is like the click of the left mouse button. A tap does things like select an item, open a Web page, move the cursor from one part of the screen to another, or put a check in a box. When you press the function button and then touch the stylus to the screen, the stylus acts like the right mouse button and displays a menu if one is available.
There are several other ways to move around in your Pepper pad:

The Pepper pad uses the standard QWERTY arrangement with the keys split between the left and right keypads.

Volume control for media players
Function (light blue key) + any key with a blue character on it inserts the blue character. The Function key makes it possible for some alphabetical keys to provide three characters (for example, r, R with the Shift key, and + with the Function key). Press and release the Function key and then press the second key.
Control + key provides many control sequences (for example, ctrl-c copies selected text, and ctrl-v pastes it). Press and release the Control key and then press the second key.
Shift key for capital letters. Press and release the Shift key; then, press and release the second key.

Power button for turning pad on, putting it to sleep, and turning it off.
Media control keys for use with music, videos, and streaming radio broadcasts (from the top left, the keys are Rewind, Forward, Play/Pause, and Stop).
Backspace key for deleting text.
Enter for a new line of text or for choosing the primary action on a page (for example, if you select a song and press Enter, the song plays).
Shift key for capital letters. Press and release the Shift key; then, press and release the second key.
Space bar

Setting up your Pepper pad takes only a few minutes. The Pepper Setup Helper will present you with a series of simple screens in which you will enter information and perform setup tasks.
The Setup Helper takes you through
If you ever need to re-calibrate the screen or change your network, time zone, or IM settings, open the Settings tab in the Keeper, and select the appropriate icon. To change your e-mail information, open the Settings tab in the Mail application.

The Pepper Desktop program runs on a Windows computer (with a Macintosh version in development) and contains the same applications as the Pepper pad. You can use the Pepper Desktop program the same way you use your pad, but its two primary functions are as a backup for your pad and as one source of music, videos, and photos for your pad.
To download and set up a Pepper Desktop program:
See “Getting media onto your pad” in the next section for instructions on getting media from your Pepper Desktop onto your pad.
See the Help tab in the Keeper on your pad for instructions on backing up your pad to your Pepper Desktop.

The software on the Pepper pad is intuitive to use. You’ll be surfing the Web, reading your e-mail, watching videos, and downloading music in no time. This brief tour is designed to familiarize you with the interface.
Web address Tabs Page toolbar

Status icons IM window

The software on your Pepper pad is contained in a number of individual applications, such as the Web browser application, the Mail application, and the Video Library application. The Keeper is the application in which you keep track of all of the other applications and the cross-application settings. When your pad is turned on, the Keeper icon is displayed on the bottom left of the screen.
The global toolbar is always displayed at the top of the screen. The buttons in this toolbar provide a consistent way to perform actions that are common to Pepper applications. For example, use the Back button to display the previous page in an application and the IM button to open the instant messaging window.
Below the buttons in the global toolbar, there is a place to enter a Web address and a place to initiate a search.
The page toolbar changes depending on the application and what part of the application is being displayed. For example, there is a Get Mail button in the page toolbar on the Messages tab page in the Mail application but not in the page toolbar on the Drafts tab page.
Each application in the Pepper software is comprised of a set of pages or digital media organized into tabs. An application is something like a loose-leaf binder with tabs and pages within the tabs. The tabs in a Pepper application are displayed across the top of the application area below the global toolbar.
Most tabs display a list of the contents in the tab. For example, the Applications tab in the Keeper displays the icons for the other applications on your pad, and the Search Site tab in the Web browser application displays a list of familiar Web sites. To see the contents of a tab, tap the tab.
Tabs are one of the most powerful features of the Pepper software. For more information about tabs, see Help in the Keeper.

At the bottom of the Pepper pad screen is an area that displays icons for all of the applications that you currently have open. The left-most open application icon is always the icon for the Keeper. Tapping one of these icons displays the application. You can switch between open applications simply by tapping different application icons.
The IM window is the place where you send and receive AOL IM and local network IM messages. The illustration of the Pepper interface shows the IM window open, but it will be closed when you display the Keeper for the first time. See “Using instant messaging” on page 17 for more information about instant messaging.
Status icons are displayed on the bottom right of the screen. You will always see a battery icon here. When the battery is charging, this icon displays a lightning bolt. Otherwise, the icon shows the amount of charge left in the battery.
You will also always see the Wi-Fi connection icon. When your pad is not connected to a Wi-Fi network, this icon will be displayed with a red X through it.
An instant messaging icon will be displayed when you are logged on to AOL IM or local network IM.
While you are downloading something from the Web, a download icon will be displayed.
The navigation pad below the left keypad gives you a convenient way to select an icon or an entry on a tab page. Then, you can open your selection (if it is an application or something like an e-mail message) or play it (if it is something like a video).
To select an icon or table entry, use one of the arrow keys to highlight the icon or entry.
To open the icon or play the entry, press the center of the navigation pad or the Enter key on the right keypad.
You can also play music or a video by pressing the Play media control key on the right keypad (see page 9 for an illustration of the symbols on media control keys) or by tapping the icon or the entry with the stylus or your finger.

There are several ways to get your photos, music, and other content onto your pad:
To use a USB device or an SD card to put content on your pad:
1. Plug a storage drive or digital camera into the USB port on the left side of your pad, or insert a memory card in the SD/MMC card slot on the right side. 2. In the Applications tab in the Keeper, tap the icon for one of the libraries. 3. In the library, tap the Add button in the page toolbar (for example, tap the Add Photos button in Photo Library). 4. On the menu, select one of the USB or memory card options.
To use Sync to put content on your pad:
1. On your Pepper pad, tap the Settings tab in the Keeper, tap the Sync icon, and set the Sync password. 2. Log on to the Local Network IM from both your pad and your Pepper Desktop. 3. In one of the libraries in your Pepper Desktop, tap the Add button in the page toolbar (for example, the Add Photos button in Photo Library). 4. On the menu, select either Select files from disk or All files from a folder. 5. Select files or a folder to put in the library. 6. On the Pepper Desktop, click the Share button in the global toolbar. Then select Sync with computer. 7. In the dialog box, select your pc, enter the password for your pad, and click Sync.
The Pepper pad is designed to make doing things on the Internet easy and fun. To this end, it has some features that will be new to you. Soon you’ll wonder how you ever lived without them.
The Keep and Share buttons in the global toolbar represent features that are unique to the Pepper pad and the Pepper Desktop.
The Keep button makes saving something from the Web simple. With Keep, you can save whole Web pages or selected text and images from a Web page for viewing later. Because these clippings are available when you are offline, as well as online, you can stock up on interesting news articles and catalog information for those times when you can’t reach the Internet.

The Share button gives you a great way to share what you create on your Pepper pad with other Pepper pad and Pepper Desktop users. For example, you might create a journal about your vacation in a foreign country, add images from the Web, and share your journal with friends.
When you are collaborating with someone with a Pepper pad or a Pepper Desktop, the other person can add pages and images and share your application back to you. Your travel journal might be such a collaboration.
The sharable applications installed on your pad initially are Journal, Web, Internet Radio, and Remote Control. You can purchase other sharable applications from the Pepper Store by selecting the Get Applications button in the Applications page toolbar in the Keeper.
The Pepper pad provides flexible and convenient Web browsing that you can tailor to your habits and interests.
Surf the Web by
Details about the various ways to browse are in the Help tab of the Web application.
With the Mail application, you can
To launch the Mail application and download e-mail:

Because the Mail application remains instantly available when its icon is displayed at the bottom of the screen, you can get new messages by tapping the Mail icon and then tapping the Get Mail button in the page toolbar in the Messages tab.
The Pepper pad provides two kinds of instant messaging; AOL IM and Local Network IM. When you are logged onto either IM, its icon is displayed on the lower right of the screen.
To open the IM window:
To close the IM window, either tap the Hide button in the IM window or the IM button in the Global toolbar.
If you had an AOL Instant Messaging account before you got your Pepper pad, your buddy lists are imported to the pad when you enter your AOL Screen Name and password and sign on.
If you are new to AOL IM, once you have a Screen Name and Password and sign on, you can set up buddy lists, send instant messages, and invite people for chats.
You can have only one AOL IM session running at a time using the same Screen Name. Therefore, if you are logged on from your pad and you log onto AOL IM from a computer with the same Screen Name, you will be logged out of the AOL IM session on your pad. Conversely, if you are logged onto AOL IM from a computer and log on from your pad, you will be logged out of the other AOL IM session. Local Network Instant Messaging

Everyone on your network who is using a Pepper pad or a Pepper Desktop program is automatically a member of your local IM group. The members of this group who can receive local messages have an icon next to their names in the IM window on your pad.
When you are logged onto Local Network IM, the Pepper icon is displayed on the lower right of the screen.
For entering large amounts of text, you can use a keyboard with your Pepper pad. For navigation and selection, you can use a mouse.
You can use a wireless Bluetooth® keyboard (and mouse) or connect a keyboard (or mouse) to your pad via the USB port. With a USB hub, you can connect both a keyboard and a mouse at the same time.
To use a Bluetooth keyboard with your pad:
The Pepper pad is easy to use, and you probably won’t need help very often, but you may appreciate your pad more quickly if you take a few minutes to familiarize yourself with what Help has to offer.
There is Help for the Pepper pad itself and for each application. Just look for the Help tabs. This section gives a brief overview of the Help tab in the Keeper.
The Help tab in the Keeper gives you instructions on using your pad and an overview of features that are common to most of the applications. It also contains hints for troubleshooting problems that may occur.
There is a report page in this Help tab that you can send to Pepper Support via the Internet when you have questions, problems, suggestions, or praise. Our users’ experiences are very important to us, and we hope to hear from you.
In Help, you will find your software license, a privacy policy and acknowledge- ments of third-party software used by Pepper products.

If your Pepper pad won’t turn on
If you can’t turn your Pepper pad on, first make sure that the battery is charged or that the pad is plugged in. If you still can’t turn it on and the pad has been at a cold temperature (below 40° F or 5° C), let it warm up and try turning it on again.
If your pad still won’t turn on, contact Customer Service. If you have Web access from a computer, you can send e-mail to support@pepper.com. If you don’t have Web access, call Customer Service at (866) 288-1909, ext. 214.
If you can’t connect to your Wi-Fi network
Make sure that your Wi-Fi Access Point (AP) is set up and running and that you can connect a computer to the AP. If you can't connect a computer to the AP, refer to the documentation for your AP for troubleshooting information about setting up your hardware and network.
Make sure that you are not out of range of the AP.
Make sure that you spelled your network name (essid) correctly and entered the correct key or passphrase on the Wi-Fi Settings page.
Check the security configuration for your AP to make sure that there are no restrictions that may be preventing you from connecting.
If you have set up your network not to broadcast its name, you won't see it in the list of available networks. However, you can enter the network name and key or passphrase on the Wi-Fi Settings page.
Restarting your Pepper pad
In the unlikely event that your Pepper pad is unresponsive, you’ll need to restart it. You won’t lose what you’ve been doing, so restarting is not a big deal.
To restart your pad, turn it off and turn it back on.

Pepper wireless pad specifications 20
Processor • Intel XScale PXA270 (624 MHz)
Wired Peripherals • USB 1.1 Client/Host
Expansion Slots • SD/MMC card
Storage • 20 GB 1.8” disk drive (ATA)
Windows 98, 2000, ME or XP 400MHz Intel Pentium processor or better 128MB or more of RAM Broadband Internet connection (recommended) 65,000-color SVGA display or better



Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
FCC Information 22





© 2005 Pepper Computer, Inc. All Rights Reserved. Pepper, Pepper Computer and the Pepper logo are trademarks of Pepper Computer, Inc.
Pepper Computer, Inc. 10 Maguire Rd., Suite 211 Lexington, MA 02421 www.pepper.com
For Customer Service: send e-mail to support@pepper.com or call toll-free (866) 288-1909, ext. 214. Telephone support is available Monday-Friday, 9 a.m.-5 p.m. Eastern Time. For the latest information, select the Support tab at store.pepper.com.
11-15001
Owners and our team usually reply within a day — and your question helps the next person too.
Be the first to ask — other owners or our team will answer.