Instruction/ maintenance manual of the product Quasar Pentair
Go to page of 12
REV. F 1-6-05 1 P/N 98748000 Quasar ™ Light and Return W ater Flow for Above Ground Pools Owners Manual Pentair Water Pool and Spa, Inc. 1620 Hawkins Ave., Sanford, NC 27330 • (919) 566-8000 10951 West Los Angeles Ave., Moorpark, CA 93021 • (805) 523-2400 Visit us on the Internet at: www.
P/N 98748000 2 REV. F 1-6-05 SECTION I. IMPORTANT SAFETY INSTRUCTIONS When installing and using this electrical equipment, basic safety precautions should always be followed, including the following. 1. This light can be installed on storable above ground or permanent above ground pools.
REV. F 1-6-05 3 P/N 98748000 NOTE Retain the gaskets supplied and keep them accessible. 3. Use the Teflon™ tape provided. Snugly wrap the threaded wall flange in a clockwise direction (as viewed from the back) starting at the edge of the threads; see Figure 2.
P/N 98748000 4 REV. F 1-6-05 NOTE For narrow, interlocking, extruded aluminum wall panels, center flange between the ridges while viewed from the inside of the pool. Add the spacer and additional gasket to the flange before inserting the flange through the wall panel.
REV. F 1-6-05 5 P/N 98748000 1 6 . Now, from inside the pool, push the bulb assembly and flow director with the red cap/plug in place into the fitting body until the bulb assembly/flow director are nearly flush against the inside pool wall. 1 7 . Thread the bulb assembly nut until it just touches the fitting body, then finger tighten.
P/N 98748000 6 REV. F 1-6-05 ¿¿¿WHAT IS A GFCI??? A ‘Ground Fault Circuit Interrupter’ is an electrical safety device designed to measure electrical leakage in a circuit.
REV. F 1-6-05 7 P/N 98748000 W ARNING Do not attach or hang anything but this cord from the cord cap through the hole in the body to the transformer housing. Attaching or hanging items from this location can result in failure to the body or the pool wall which can result in serious personal injury and/or property damage.
P/N 98748000 8 REV. F 1-6-05 1 1 . Place the junction box cover on the junction box bottom so that the junction box can more easily snap into the transformer box; see Figure 15.
REV. F 1-6-05 9 P/N 98748000 SECTION V. RELAMPING INSTRUCTIONS W ARNING Risk of electric shock. Disconnect power before servicing this unit. Failure to disconnect power can result in death or severe personal injury. 1 . It is desirable to reduce the water level to the lower edge of the flow director.
P/N 98748000 10 REV. F 1-6-05 8 . Thread the bulb assembly nut until it just touches the fitting body, then finger tighten. CAUTION Do not over tighten as adjustability of flow director may be impaired and/or damage to parts causing leakage may occur.
REV. F 1-6-05 11 P/N 98748000 7 . Remove the bulb assembly by pulling on the flow director while pushing the bulb assembly from the outside of the pool. NOTE The fitting body, threaded wall flange and gaskets may remain attached to the pool wall when winterizing, but should be removed if pool is to be stored.
P/N 98748000 12 REV. F 1-6-05 SA VE THESE INSTRUCTIONS. Pentair Water Pool and Spa, Inc. 1620 Hawkins Ave., Sanford, NC 27330 • (919) 566-8000 10951 West Los Angeles Ave., Moorpark, CA 93021 • (805) 523-2400 Visit us on the Internet at: www.pentairpool.
An important point after buying a device Pentair Quasar (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Pentair Quasar yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Pentair Quasar - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Pentair Quasar you will learn all the available features of the product, as well as information on its operation. The information that you get Pentair Quasar will certainly help you make a decision on the purchase.
If you already are a holder of Pentair Quasar, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Pentair Quasar.
However, one of the most important roles played by the user manual is to help in solving problems with Pentair Quasar. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Pentair Quasar along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
