Instruction/ maintenance manual of the product QT4 Pentair
Go to page of 8
Rev. A 7-25-03 1 P/N 520209 QuickT ouch (QT4) Owner ’ s Manual 4-Function Hand-Held Wireless Remote Control Important Notice Attention Installer. This manual contains important information about the installation, operation and safe use of this product.
P/N 520209 2 Rev. A 7-25-03 SECTION I. APPLICA TION Used in conjunction with the IntelliT ouch Pool/Spa Control System. Provides switching of four remote control circuits from a wireless Hand-held Remote.
Rev. A 7-25-03 3 P/N 520209 Configuring the Buttons of the 4-Function Quic kT ouch Wireless Hand-held Remote to contr ol y our desired functions Getting There MENU SETUP AD V ANCED REMO TES CONFIGURE QT WIRELESS Hint: Before configuring the wireless remote, assign names to the A UX circuits and / or FEA TURE circuits.
P/N 520209 4 Rev. A 7-25-03 SECTION V . INST ALLA TION Receiver The functional range of the wireless remote (from Hand-held Remote to Receiver) is approximately 150 ft. line-of-sight. The receiver should be mounted at a convenient location (on a flat vertical surface) a minimum of 5 ft.
Rev. A 7-25-03 5 P/N 520209 SECTION VI. CUSTOMIZING THE COMMUNICA TION LINK The communication link between the Receiver and Hand-held Remote can be customized to prevent electrical interference. T o accomplish this, there is a 10-position configuration switch located on the Receiver circuit board, and inside the Hand-held Remote.
P/N 520209 6 Rev. A 7-25-03 TROUBLE-SHOOTING Symptom Possible Cause Solution POWER LED does not light. Load Center does not Insure power is being supplied have power . and that the Load Center operates correctly without the receiver installed. Defective cable or conne ction V erify the function of the board to the Load Center .
Rev. A 7-25-03 7 P/N 520209 For questions, repairs, replacement parts, or information on possible Authorized Service Centers within your vicinity call: Pentair Pool Products ~ 800-831-7133 Or visit us on the Internet at www .
P/N 520209 8 Rev. A 7-25-03 Pentair Pool Products 1620 Hawkins Ave., Sanford, NC 27330 • (919) 774-4151 10951 West Los Angeles Ave., Moorpark, CA 93021 • (805) 523-2400.
An important point after buying a device Pentair QT4 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Pentair QT4 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Pentair QT4 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Pentair QT4 you will learn all the available features of the product, as well as information on its operation. The information that you get Pentair QT4 will certainly help you make a decision on the purchase.
If you already are a holder of Pentair QT4, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Pentair QT4.
However, one of the most important roles played by the user manual is to help in solving problems with Pentair QT4. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Pentair QT4 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
