Instruction/ maintenance manual of the product CP-2000 Pentair
Go to page of 8
ONE YEAR LIMITED WARRANTY Compool Corporation warrants to the purchaser of this electronic control system, for the period of one year from the date of original purchase for use, that any defective pro.
IMPORTANT SAFETY INSTRUCTIONS MAINTENANCE READ AND FOLLOW ALL INSTRUCTIONS. Basic safety precautions should always be followed when operating and servicing this electrical equipment. WARNING : To reduce the risk of injury, do not permit children to use this product unless they are closely supervised at all times.
TEMPERATURE CONTROL : Separate electronic controls are provided for POOL and SPA heating. Each control incorporates the following : THERMOSTAT Dial : Used to preset your desired water temperature.
FILTER PUMP DOES NOT OPERATE : 1. At the CP-2000, check that FILTER Status Light is ON 2. At the LX-10, turn SYSTEM CONTROL Switch to the "SERVICE" position, and FILTER Switch at MANUAL CONTROL to the "ON' position. 3. If filter pump operates, there is a possible malfunction at the LX-10 circuit board.
REMOTE CONTROLS SPA-SIDE REMOTE : One or more 4-button waterproof Remote Controls (called SUPERSWITCH) may be located at your spa. This will enable you to override the CP-2000 Controller, and act~vate your spa equipment from the convenience of the sDa.
CUSTOM CLOCK OPTIONS SERVICE CENTER The standard CP-2000 Controller is provided with the appropr~ate equipment interlock and safety delays, and enables you to enter a total of six program steps.
PROGRAMMING INSTRUCTIONS The CP-2000 Controller houses a 24 hour Clock with a digital display, which can be used to program daily pool filtration, cleaning, and other auxiliary functions such as pool and spa lights. It can also be used to program and preheat your spa.
"PROG 3 will now appear on the r~ght of the Display. This indicates that the third program step is ready to be entered. Enter the third program time (12:OO pm) by pushing the HOURS and MINUTES Buttons Pay special attention to the AM/PM indicator.
An important point after buying a device Pentair CP-2000 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Pentair CP-2000 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Pentair CP-2000 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Pentair CP-2000 you will learn all the available features of the product, as well as information on its operation. The information that you get Pentair CP-2000 will certainly help you make a decision on the purchase.
If you already are a holder of Pentair CP-2000, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Pentair CP-2000.
However, one of the most important roles played by the user manual is to help in solving problems with Pentair CP-2000. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Pentair CP-2000 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
