Instruction/ maintenance manual of the product PL-673 Pelican
Go to page of 22
PL-673 Race ‘N Play W ireless Rev#100303 For PlayStation ® 2 PL-000 Race N Play Manual.qxd 10/3/03 2:37 PM Page 1.
T able of Contents Console Protection Guarantee .................. 1 Product Layout .......................................... 2 Overview ................................................... 5 Instructions For ..........................................
1. Console Protection Guarantee Pelican’s Console Protection Guarantee assures you of Pelican’s com- mitment to quality and customer satisfaction. The Protection Guarantee warrants the connection (the plug port of the video game console and the plug of the Pelican controller) between the controller and your video game console system.
2. Product Layout Race N Play Wireless Controller Directional Buttons SELECT Button Left Analog Stick/ L3 Button Fire Buttons START Button Right Analog Stick/ R3 Button ANALOG Mode Button Power LED PL-000 Race N Play Manual.
3. Race N Play W ireless Receiver Unit CHANNEL Switch SIGNALLED L2 Button R2 Button R1 Button L1 Button ANALOG LED CHANNEL Switch Antenna Slot PL-000 Race N Play Manual.
4. Race N Play Car Race N Play Car Charger Antenna PL-000 Race N Play Manual.qxd 10/3/03 2:37 PM Page 6.
5. Product Overview Race N Play Wireless Controller uses advanced RF technology which gives you the ability to play without the limitations of typical corded controllers while still giving you lightning fast control over your favorite game or even control the included RF car .
6. Mode LED / Analog Button: Press the Analog Button to switch modes. When the LED is red the controller is in analog mode, and when the LED is off the controller is in digital mode.
7. Battery Compartment: Race N Play Wireless requires the use of two AA batteries. There are two battery compartments on the Race N Play Wireless. One battery will go in each handle. Because of the battery location the vibration motors have been removed from Race N Play Wireless, meaning there is no vibra- tion function.
8. Race N Play Car: Race N Play Wireless comes standard with a Micro RF Car that can be controlled using your Race N Play Controller . Race N Play Car Charger: A quick charger is also included to charge the Race N Play car . The charge time is approximat- ly 2 minutes and will last for 5 minutes of racing.
9. Instructions For Race N Play Wireless Controller 1. Make sure your PlayStation® 2 is turned off. 2. Remove the battery lids using the supplied screw driver and place 2 AA batteries (not includ- ed) into the Race N Play Wireless Controller . Make sure the batteries are inserted as shown in the battery compartment.
10. 4. Make sure the Receiver channel is set to the same channel as the controller . This is important, if the channels don’t match on both the controller and the receiver there will be no communication and the product will not function.
11. 5. Plug your new Race N Play Receiver Unit into controller port one. If you already have a con- troller and want to use Race N Play Wireless as a second controller, make sure you have a con- troller plugged into controller port one and plug the Receiver Unit into controller port two.
12. Instructions For Race N Play Car & Charger 1. Make sure your PlayStation® 2 is turned off. 2. Remove the battery lids using the supplied screw driver and place 2 AA batteries (not includ - ed) into the Race N Play Wireless controller . Make sure the batteries are inserted as shown in the battery compartment.
13. 3. Set the Channel Switch to the Car position. The switch should be all the way to the right most position. 4. Connect the supplied High Performance Antenna to the Race N Play controller . The antenna will screw in clock wise. 5. Remove the battery lid for the Race N Play Car Charger and properly insert the batteries.
14. 6. Place the Race N Play Car on the Charger and let it charge for approximately two minutes. 7. Remove the Race N Play Car from the charg- er . Y ou are now ready to let the racing begin. Once the battery on the Race N Play Car gets low you can just simply place it back on the charger and let it charge for another two minutes.
15. T rouble Shooting For Race N Play Wireless Controller If you are having difficulties with your new Race N Play Wireless Controller please refer below: The Vibration function is not working on my new Race N Play W ireless controller.
16. My Race N Play Wireless does not seem to operate properly and is losing connection with the Receiver . 1. It is quite normal to have interference from other devices in your home such as cell phones, cordless phones, wireless networks, or even microwaves.
17. T rouble Shooting For Race N Play Car My Race N Play Car does not seem to operate properly or does not respond to the Race N Play Wireless Controller . 1. Check to verify the the Race N Play Wireless Controller is set to the “Car” position on the channel switch.
18. W arranty Card Pelican warrants to the original consumer purchaser that the product will be free from defects in materials and / or workmanship for a period of 5 years from the date of purchase.
Changes or modifications not expressly approved by the manufacturer could void the user's author - ity to operate the equipment. This device com- plies with Part 15 of the FCC Rules.
1840 East 27th Street V ernon, CA 90058 USA http://www .pelicanperformance.com ® ® PL-000 Race N Play Manual.qxd 10/3/03 2:37 PM Page 22.
An important point after buying a device Pelican PL-673 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Pelican PL-673 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Pelican PL-673 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Pelican PL-673 you will learn all the available features of the product, as well as information on its operation. The information that you get Pelican PL-673 will certainly help you make a decision on the purchase.
If you already are a holder of Pelican PL-673, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Pelican PL-673.
However, one of the most important roles played by the user manual is to help in solving problems with Pelican PL-673. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Pelican PL-673 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
