Instruction/ maintenance manual of the product RK5000PS-5U Pelco
Go to page of 16
INSTALLATION Rack Mount Chassis RK5000PS-5U For Endura Modules C1615M-A (9/05).
2 C1615M-A (9/05) Contents Regulatory Notices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Before You Begin .
C1615M-A (9/05) 3 Regulatory Notices This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
4 C1615M-A (9/05) Before Y ou Begin Please familiarize yourself with the parts list before installing the unit. PARTS LIST Qty Description 1 RK5000PS-5U rack mount chassis with fan baffle for thermal.
C1615M-A (9/05) 5 Description The RK5000PS-5U rack mount chassis supports Endura IP system modules. The chassis has 12 slots for single-width modules and 2 slots for an internal, double-width power supply . Y ou can fill the empty slots with single-width blank modules (RK5001B-4U).
6 C1615M-A (9/05) BACK V IEW Thumbscrew for Fastening Modules (12) Fan (10) 10-Pin Power Connector Relay Output Connector AC Power Cord Connector Power Switch Spare Fuse Figure 3.
C1615M-A (9/05) 7 Installation MOUNTING A CHASSIS The RK5000PS-5U chassis can be mounted into an EIA-standard, 19-inch rack. T o mount the chassis into a rack, follow these steps and refer to Figure 4. 1. Insert the chassis into the rack. 2. Secure the chassis to the rack with the supplied screws and washers.
8 C1615M-A (9/05) INSTALLING A MODULE Y ou can install up to 12 single-width modules into the RK5000PS-5U. T o install a module, follow these steps and refer to Figure 6. 1. Insert the module into an empty slot of the chassis. The two slots on the right are for the power supply .
C1615M-A (9/05) 9 INSTALLING A BLANK MODULE Single-width blank modules can be used to fill the empty module slots on the chassis. T o install a blank module, follow these steps and refer to Figure 7. 1. Insert the blank module into the empty slot on the chassis.
10 C1615M-A (9/05) INSTALLING AN INTERNAL POWER SUPPLY The double-width internal power supply must be installed into the RK5000PS-5U chassis. T o install the internal power supply , follow these steps and refer to Figure 8. 1. Insert the power supply into the rack.
C1615M-A (9/05) 11 Service REPLACING AN INTERNAL POWER SUPPLY Y ou can easily replace the internal power supply in the RK5000PS-5U with a replacement (RK5PWR-300). Y ou will know if there is a problem with the power supply because the blue Pelco badge on the front panel will turn off.
12 C1615M-A (9/05) REPLACING A FAN The fan baffle on the RK5000PS-5U has 10 fans. These fans can be replaced easily in case of failure. T o replace a fan, follow these steps and refer to Figures 9-12. 1. Unscrew the two thumbscrews on the back of the fan baffle.
C1615M-A (9/05) 13 Figure 11. Fan Screws Figure 12. Fan Connector.
14 C1615M-A (9/05) Specifications ELECTRICAL Input V oltage 100-240 V AC, 50-60 Hz, autoranging Output V oltage 12 VDC Power Consumption 300 watts, 154 BTU/H (non-inclusive of components within the r.
This equipment contains electrical or electronic components that must be recycled properly to comply with Directive 2002/96/EC of the European Union regarding the disposal of waste electrical and electronic equipment (WEEE). Contact your local dealer for procedures for recycling this equipment.
W orldwide Headquarters 3500 Pelco W ay Clovis, California 93612 USA USA & Canada T el: 800/289-9100 Fax: 800/289-9150 International T el: 1-559/292-1981 Fax: 1-559/348-1120 www .
An important point after buying a device Pelco RK5000PS-5U (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Pelco RK5000PS-5U yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Pelco RK5000PS-5U - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Pelco RK5000PS-5U you will learn all the available features of the product, as well as information on its operation. The information that you get Pelco RK5000PS-5U will certainly help you make a decision on the purchase.
If you already are a holder of Pelco RK5000PS-5U, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Pelco RK5000PS-5U.
However, one of the most important roles played by the user manual is to help in solving problems with Pelco RK5000PS-5U. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Pelco RK5000PS-5U along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center