Instruction/ maintenance manual of the product MRD1400HZ16 Pelco
Go to page of 12
MRD1400HZ16 Camera Contr ol Inter face for the CC1400HZ16 Installation/ Operation Manual C1973M-B (8/03) ® P elco • 3500 P elco Wa y • Clovis, CA 93612-5699 USA • www .
2 Pelco Manual C1973M-B (8/03) LIST OF T ABLES T able Page A Baud Rate Switch Settings ................................................................................ 4 B MRD DIP Switch Settings .......................................................
Pelco Manual C1973M-B (8/03) 3 IMPORT ANT SAFEGUARDS AND W ARNINGS Prior to installation and use of this product, the following W ARNINGS should be observed. 1. Installation and servicing should only be done by qualified service personnel and con- form to all local codes.
4 Pelco Manual C1973M-B (8/03) DESCRIPTION The MRD1400HZ16 is a camera interface control for Pelco’s CC1400HZ16 Series digital color camera. The unit can be mounted directly to a wall or installed in a DF5 Series dome, DF8A Series dome, EH2512 Series enclosure, or EH3512 Series enclosure.
Pelco Manual C1973M-B (8/03) 5 MRD ADDRESS SETTINGS A camera address setting is required for the controller/switcher to communicate with the MRD1400HZ16. The default setting for the MRD is Receiver Address 1. If you are using more than one MRD, each unit must have a different Receiver Address.
6 Pelco Manual C1973M-B (8/03) MRD1400HZ16 INST ALLA TION METHODS There are three methods of installation for the MRD1400HZ16. The unit can be mounted directly to a wall, or installed inside a dome or enclosure using the supplied mount adapters. Refer to the following sections and select the correct installation method for your application.
Pelco Manual C1973M-B (8/03) 7 Figure 3. DF5/DF8 Installation Figure 4. Removing the MRD Board CAMERA BRACKET DOME MRD1400HZ16 AND MOUNT ADAPTER 01212 POWER LED RESET BUTTON DA T A LED 01216.
8 Pelco Manual C1973M-B (8/03) EH3512 SERIES ENCLOSURE INST ALLA TION Do the following to install the MRD1400HZ16 in an EH3512 Series enclosure: 1. Remove the camera sled from the EH3512 Series enclosure. If the camera is attached to the sled remove the camera.
Pelco Manual C1973M-B (8/03) 9 EH2512 SERIES ENCLOSURE INST ALLA TION T o install the MRD1400HZ16 in an EH2512 Series enclosure: 1. Remove the PC board from the MRD1400HZ16. T o remove the board: a. Unscrew the two Phillips button head screws from the unit (refer to Figure 2), and remove the cover .
10 Pelco Manual C1973M-B (8/03) CONTROL, POWER, AND CAMERA CONNECTIONS 1. Refer to Figure 8 and T able C. Connect the control wires from the controller to the MRD DA T A IN connector . Use the supplied four-pin connector . T o connect multiple units with parallel connections refer to Figure 9.
Pelco Manual C1973M-B (8/03) 11 OPERA TION CAMERA OPERA TION PELCO CONTROLLER COMMAND Zoom In T ilt joystick up Zoom Out T ilt joystick down Quickly Zoom In Press the Zoom T ele button or turn the joy.
12 Pelco Manual C1973M-B (8/03) REVISION HISTOR Y Manual # Date Comments C1973M 10/01 Original version. C1973M-A 8/02 Revised instructions. C1973M-B 8/03 Revised supplied parts list and installation instructions for DF5/DF8 and EH2512 enclosures. TROUBLESHOOTING Problem Possible Cause and Solutions Unit does not operate.
An important point after buying a device Pelco MRD1400HZ16 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Pelco MRD1400HZ16 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Pelco MRD1400HZ16 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Pelco MRD1400HZ16 you will learn all the available features of the product, as well as information on its operation. The information that you get Pelco MRD1400HZ16 will certainly help you make a decision on the purchase.
If you already are a holder of Pelco MRD1400HZ16, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Pelco MRD1400HZ16.
However, one of the most important roles played by the user manual is to help in solving problems with Pelco MRD1400HZ16. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Pelco MRD1400HZ16 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
