Instruction/ maintenance manual of the product MPTV1510 Pelco
Go to page of 12
MPT1510DT and MPTV1510 Series Controllers Installation/ Operation Manual C565M-B (7/98) Pelco • 3500 Pelco Way, Clovis • CA 93612-5699 USA • www.
2 Pelco Manual C565M-B (7/98) REVISION HISTOR Y Manual # Date Comments C565M 1/85 Original version (schematics only). C565M-A 6/90 Added text. C565M-B 7/98 Reformatted and added Model MPTV1510PZ. Removed schematics. LIST OF ILLUSTRA TIONS Figur e Page 1 Output Connector Assembly Diagram .
Pelco Manual C565M-B (7/98) 3 Please thoroughly familiarize yourself with the information in this manual prior to installation and operation. 1.0 GENERAL 1.1 IMPORT ANT SAFEGUARDS AND W ARNINGS Prior to installation and use of this product, the following WARNINGS should be observed.
4 Pelco Manual C565M-B (7/98) 1.2 UNP ACKING INSTRUCTIONS Unpack and inspect all parts carefully . The following items are supplied: 1 MPT1510DT or MPTV1510 Series Controller 1 Installation/Operation Manual (C565M-B) Be sure to save the shipping carton, boxes and inserts.
Pelco Manual C565M-B (7/98) 5 2.0 DESCRIPTION The MPT1510DT or MPTV1510 Series Controllers provide all the necessary elec- tronics to implement the features below for Pelco's PT1250DC heavy duty and PT550P medium duty 1 15 VDC pan and tilt units.
6 Pelco Manual C565M-B (7/98) 3.0 INST ALLA TION 3.1 OUTPUT CONNECTOR ASSEMBL Y Assemble the connector parts according to the instructions below . Refer to Figure 1 during assembly . For best results use an AMP style crimper when making the wire- to-pin connection.
Pelco Manual C565M-B (7/98) 7 T able A. Output Connector Pin Assignments Pin No. Function 1 Pan/tilt common 2 No connection 3 Pan left 4 Field supply 5 T ilt down 6 T ilt up 7 Pan right 8 Ground 9 No connection 10 Iris 1 1 Focus 12 Zoom 13 Lens common 14 No connection Figure 1.
8 Pelco Manual C565M-B (7/98) 4.0 OPERA TION Refer to Figure 2. 1. Set the power switch to the ON position to activate the controller . The pilot lamp will light when power is applied. 2. If your model has a P AN switch, set it in either the AUTO position to select auto scan (pan) or the MANUAL position to use the joystick.
Pelco Manual C565M-B (7/98) 9 5.0 TROUBLESHOOTING If operating problems are experienced with the controller , check the fuses and the power supply cord. Next, check the condition of the output cable and its two con- nections. There is nothing else that can be done without the aid of proper test equipment.
10 Pelco Manual C565M-B (7/98) 6.0 SPECIFICA TIONS ELECTRICAL Input Voltage: 120 VAC, 50/60 Hz Maximum Power Requirements: 250 vA Power Cord: 3-wire grounded, #18 AWG Fuse Protection: Model F1 F2 F3 MPT1510DT 1 A N/A N/A MPTV1510DT 2 A N/A N/A MPTV1510CAZ 3 A 2 A 0.
Pelco Manual C565M-B (7/98) 11 NOTES.
12 Pelco Manual C565M-B (7/98) 7.0 WARRANTY AND RETURN INFORMA TION Pelco, the Pelco logo, Camclosure, Esprit, Genex, Legacy, and Spectra are registered trademarks of Pelco. Endura and ExSite are trademarks of Pelco. © Copyright 1998, Pelco. All rights reserved.
An important point after buying a device Pelco MPTV1510 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Pelco MPTV1510 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Pelco MPTV1510 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Pelco MPTV1510 you will learn all the available features of the product, as well as information on its operation. The information that you get Pelco MPTV1510 will certainly help you make a decision on the purchase.
If you already are a holder of Pelco MPTV1510, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Pelco MPTV1510.
However, one of the most important roles played by the user manual is to help in solving problems with Pelco MPTV1510. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Pelco MPTV1510 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
