Instruction/ maintenance manual of the product MLZ6DT Pelco
Go to page of 8
® 1.0 W ARNINGS Prior to installation and use of this product, the following WARNINGS should be observed. 1. Installation and servicing should only be done by Qualified Service Personnel and conform to all Local codes.
2 Pelco Manual C517M Rev C (6/92) 2.0 SCOPE The information contained within this manual covers the MLZ6DT Motorized Zoom Lens Control with the 24 V AC wall mount transformer power supply .
Pelco Manual C517M Rev C (6/92) 3 4.0 INST ALLA TION 4.1 CONNECTOR ASSEMBL Y Installation and/or testing will require you to assemble the connector parts provided. Fabricate the intercon- necting cable according to the following steps (refer- ence Figure 1).
4 Pelco Manual C517M Rev C (6/92) Figure 2. Wiring Diagram for Output Pin Assignments *NO CONNECTION REQUIRED EXCEPT WHEN USED WITH A1700. ALLO WS MANU AL IRIS CONTROL.
Pelco Manual C517M Rev C (6/92) 5 5.0 OPERA TION AND SYSTEM TEST 1. Hook up the control cable between the output con- nector on MLZ6DT and the input connector on the lens (see Figure 3). 2. Check that the video is connected from the camera to the monitor .
6 Pelco Manual C517M Rev C (6/92) 7.0 SCHEMA TIC Figure 5. MLZ6DT Schematic.
Pelco Manual C517M Rev C (6/92) 7 8.0 SPECIFICA TIONS CONTROLS Zoom: Paddle switch TELE/WIDE Focus: Paddle switch NEAR/FAR Manual Iris: Paddle switch OPEN/CLOSE Auto-Iris: Paddle switch AUTO/MANUAL Vi.
8 Pelco Manual C517M Rev C (6/92) 9.0 W ARRANTY AND RETURN INFORMATION WARRANTY Pelco will repair or replace, without charge, any merchandise proved defective in material or workmanship for a period of one year after the date of shipment. Exceptions to this warranty are as noted below: • Five years on FT/FR8000 Series fiber optic products.
An important point after buying a device Pelco MLZ6DT (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Pelco MLZ6DT yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Pelco MLZ6DT - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Pelco MLZ6DT you will learn all the available features of the product, as well as information on its operation. The information that you get Pelco MLZ6DT will certainly help you make a decision on the purchase.
If you already are a holder of Pelco MLZ6DT, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Pelco MLZ6DT.
However, one of the most important roles played by the user manual is to help in solving problems with Pelco MLZ6DT. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Pelco MLZ6DT along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center