Instruction/ maintenance manual of the product ICI3008 Pelco
Go to page of 8
® Pelco • 3500 Pelco Way, Clovis, CA 93612-5699 • (559) 292-1981 • (800) 289-9100 FAX (800) 289-9150 or (559) 292-3827 ICI3016/ICI3008 16- and 8-Position Inter-Check ® Switchers Installation and Operation Manual C1007M-B (2/96) 1.0 WARNINGS Prior to installation and use of this product, the following WARNINGS should be observed.
2 Pelco Manual C1007M-B (2/96) 3.0 INST ALLA TION 1. Connect the 9-pin interface cable (supplied with the ICI3008/ICI3016 switcher) into the port labeled “RS 232” of the ICI3000P (refer to Fig.1). 2. Connect the modular phone plug of the interface cable into the port labeled “DA T A IN” on the ICI3008/ICI3016 switcher (refer to Fig.
Pelco Manual C1007M-B (2/96) 3 Figure 1 . Data Cable Connection Between ICI3000P and ICI3008 RS-232 Alarm Data in Video Out Video In Power In 1 2 3 4 5 6 7 8 Alarm Out Data In Power 2 C 1 2 1.
4 Pelco Manual C1007M-B (2/96) Following is an explanation of the prompts: REG: This is the electronic cash register (ECR) number . If using an ICI3000P , an ECR’ s number is determined by the address assigned to it on the ICI1000PIM installed at the register .
Pelco Manual C1007M-B (2/96) 5 6.0 ALARM OUTPUTS Both the ICI3008 and ICI3016 “shadow switchers” pro- vide alarm outputs for alarming other peripheral equip- ment. The ICI3008 provides eight (8) alarm outputs and the ICI3016 provides sixteen (16) alarm outputs.
6 Pelco Manual C1007M-B (2/96) Figure 2 . Cascading the ICI30008 or ICI3016 DI P S W I T CH DES CRI P T I ON- - Sw i t c h # F unc t i on 1 2 3 4 B ank addr es s B ank addr es s B ank addr es s B ank .
Pelco Manual C1007M-B (2/96) 7 Notes:.
8 Pelco Manual C1007M-B (2/96) 7.0 WARRANTY AND RETURN INFORMATION PELCO 3500 Pelco Way Clovis, CA 93612-5699 USA (559) 292-1981 • (800) 289-9100 FAX (800) 289-9150 or (559) 292-3827 International customers call 1-559-292-1981 or FAX 1-559-348-1120 (Product specifications subject to change without notice.
An important point after buying a device Pelco ICI3008 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Pelco ICI3008 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Pelco ICI3008 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Pelco ICI3008 you will learn all the available features of the product, as well as information on its operation. The information that you get Pelco ICI3008 will certainly help you make a decision on the purchase.
If you already are a holder of Pelco ICI3008, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Pelco ICI3008.
However, one of the most important roles played by the user manual is to help in solving problems with Pelco ICI3008. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Pelco ICI3008 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
