Instruction/ maintenance manual of the product FR8304 Pelco
Go to page of 24
INST ALLA TION FT8304/FR8304 Fiber T ransmitter and Receiver Four -Channel Digitally Encoded V ideo C1644M-B (6/06).
.
C1644M-B (6/06) 3 Contents Important Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Regulatory Notices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4 C1644M-B (6/06) Important Safety Instructions 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings.
C1644M-B (6/06) 5 The product and/or manual may bear the following marks: This symbol indicates that dangerous voltage constituting a risk of electric shock is present within this unit. This symbol indicates that there are important operating and maintenance instructions in the literature accompanying this unit.
6 C1644M-B (6/06) Regulatory Notices This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
C1644M-B (6/06) 7 Product Overview DESCRIPTION The FT8304/FR8304 fi ber transmitter and receiver provide the ability to transmit up to four composite video channels over one optical fi ber (refer to Figure 1).
8 C1644M-B (6/06) MODELS The FT8304/FR8304 fi ber transmitter and receiver consist of the following series of models: Multimode Models: * FT8304MSTR Four -channel fi ber optic video transmitter; mul.
C1644M-B (6/06) 9 FRONT PANEL The front panel of the FT8304 transmitter and the FR8304 receiver provides LED indicators that allow you to monitor signal status, laser status (transmitter only), and operating power . The following sections provide a view of the front panel of the FT8304 transmitter and the FR8304 receiver .
10 C1644M-B (6/06) FRONT PANEL - FR8304 RECEIVER Figure 3 illustrates the front panel of the FR8304 receiver. Figure 3. Front Panel of FR8304 Receiver For detailed information about the front-panel indicators, refer to the T roubleshooting section.
C1644M-B (6/06) 11 REAR PANEL All connections to the FT8304 transmitter and the FR8304 receiver are made to the rear panel of the modules (refer to Figure 4). Figure 4. Rear Panel of FT8304 T ransmitter and FR8304 Receiver For additional information about rear-panel connections, refer to the Installation section.
12 C1644M-B (6/06) Installation PACKAGE CONTENTS The following items are supplied: 1 FT8304 transmitter or FR8304 receiver 1 Regulated switching power supply with four plug adapters (North American, Australian, U.K., and European configurations); 100-240 VAC, 50-60 Hz input, 12 VDC output 1W all clip with two 4-40 x 0.
C1644M-B (6/06) 13 MOUNTING THE T RANSMITTER/RECEIVER TO A W ALL The FT8304 transmitter/FR8304 receiver can be mounted to a wall in the following ways: • Using the supplied wall clip for attachment of a single module to a wall. For installation instructions, refer to the Mounting the T ransmitter/Receiver Using the W all Clip section.
14 C1644M-B (6/06) Figure 5. Mounting the FT8304 T ransmitter/FR8304 Receiver Using the Wall Clip WA LL CLIP LOWER FLANGE SCREW , PHILLIPS P AN HEAD WITH LOCK W ASHER (2) HORIZONT AL MOUNTING HOLE (2).
C1644M-B (6/06) 15 CONNECTIONS Connections to the FT8304 transmitter and the FR8304 receiver are made on the rear panel of the modules and consist of the following: • Power connection NOTES: – A 12 VDC or 24 VAC power supply can be used to power the transmitter/receiver when used as a stand-alone module.
16 C1644M-B (6/06) T roubleshooting LED indicators on the front panel of the FT8304 transmitter/FR8304 receiver (refer to Figure 2 and to Figure 3, respectively) allow you to monitor signal status , laser status (transmitter only), a nd operating power .
C1644M-B (6/06) 17 Video Present LED (Continued) Red on receiver Incoming video signal is not present on the channel. Optical signal is not being received from the trans- mitter . Optic Fault LED is also red. Refer to the Optic Fault LED - Receiver section in this table.
18 C1644M-B (6/06) Optic Fault LED - Receiver Green The optical signal is being received from the transmitter . — No action required. Red The optical signal is not being received from the transmitter . T ransmitter is not powered on. Check power connections.
C1644M-B (6/06) 19 Specifications VIDEO Number of Channels 4 Modulation T ype Pulse code modulation, 8-bit resolution Video Input (FT8304)/ 1.0 Vp-p, 75 ohms; NTSC, PAL, and SECAM Video Output (FR8304) Bandwidth 6.5 MHz Gain Unity Crosstalk -50 dB typical at 3.
20 C1644M-B (6/06) OPTICAL POWER BUDGET , TRANSMISSION DISTANCE, AND LASER CLASS 1 LIMIT Model No. Wavelength Optical Power Budget Maximum T ransmission Distance Laser Class 1 Limit* T ransmitter Compatible Receiver Multimode (62.5/125 µm) FT8304MSTR FR8304MSTR 1310 nm 20 dB † 2 km (1.
C1644M-B (6/06) 21 This equipment contains electrical or electronic components that must be recycled properly to comply with Directive 2002/96/EC of the European Union regarding the disposal of waste electrical and electronic equipment (WEEE). Contact your local dealer for procedures for recycling this equipment.
.
PRODUCT WARRANTY AND RETURN INFORMATION WARRANTY Pelco will repair or replace, without charge, any merchandise proved defective in material or workmanship for a period of one year after the date of shipment.
Worldwide Headquarters 3500 Pelco Way Clovis, California 93612 USA USA & Canada T el: 800/289-9100 Fax: 800/289-9150 International T el: 1-559/292-1981 Fax: 1-559/348-1120 www.
An important point after buying a device Pelco FR8304 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Pelco FR8304 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Pelco FR8304 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Pelco FR8304 you will learn all the available features of the product, as well as information on its operation. The information that you get Pelco FR8304 will certainly help you make a decision on the purchase.
If you already are a holder of Pelco FR8304, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Pelco FR8304.
However, one of the most important roles played by the user manual is to help in solving problems with Pelco FR8304. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Pelco FR8304 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
