Instruction/ maintenance manual of the product FR8302A Pelco
Go to page of 20
INST ALLA TION FR8302A Fiber Receiver T wo-Channel Digitally Encoded Video C1649M (1/06).
.
C1649M (1/06) 3 Contents Important Safe ty Instruct ions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Regulatory Notices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4 C1649M (1/06) Important Safety Instructions 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water . 6. Clean only with dry cloth. 7. Do not block any ventilation openings.
C1649M (1/06) 5 The product and/or manual may bear the following marks: This symbol indicates that dangerous voltage constituting a risk of electric shock is present within this unit. This symbol indicates that there are important operating and maintenance instructions in the literature accompanying this unit.
6 C1649M (1/06) Regulatory Notices This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful in terference, and (2) this device must accept any interference received, including interfer ence that may cause undesired operation.
C1649M (1/06) 7 Product Overview DESCRIPTION The FR8302A fiber receiver provi des the ability to accept two composite video channels over two optical fibers. The FR8302A receiver is compatible with the F T8301A transmitt er and is also backward compatible with the F T8301 transmitter .
8 C1649M (1/06) MODELS The FR8302A fiber receiver consists of the following series of models: Multimode Models:* FR8302AMSTR-2 T wo-channel fiber optic video rece iver; multimode, ST connector; transm.
C1649M (1/06) 9 FRONT PANEL The front panel of the FR8302A receiv er provides LED indicators that allow you to monitor signal status and operating power (refer to Figure 2). Figure 2. Front Panel of FR8302A Rece iver For detailed information about the fr ont-panel indicators, refer to the T roubleshooting section.
10 C1649M (1/06) REAR PANEL Connections to the FR8302A receiver are made to t he rear panel of the modul e (refer to Figure 3). Figure 3. Rear Panel of FR8302A Receiver NOTE: For each channel, the FR8302A re ceiver pr ovides two video output connectors: one UTP connector and one BNC connector .
C1649M (1/06) 11 Installation PACKAGE CONTENTS The following it ems are supplied: 1 FR8302A receiver 1 Regulated switching power suppl y with four plug adapt ers (North American, Australian, U.K., and European configurations); 100-240 VA C, 50-60 Hz input, 12 VDC output 1 Wall clip with two 4-40 x .
12 C1649M (1/06) NOTE: The WM5001 wall mount k its can be used wi th the WM5002 wall mount kits, which are designed for mounting of double-width fiber optic modules.
C1649M (1/06) 13 CONNECTIONS Connections to the FR8302A receiver are made on the rear panel of the module and consist of the following: • Power connection NOTES: – A 12 VDC or 24 VA C power supply can be used to power the receiver when used as a standalone module.
14 C1649M (1/06) T roubleshooting LED indicators on the front panel of the FR8302A rece iver (refer to Figure 2) allow you to monitor signal status and operat ing power . T able A provides informat ion about the front-pan el indicators and associated troubleshooting guidelines.
C1649M (1/06) 15 Optic Fault LED Green The optical signal is being received from the transmitter . – No action required. Red The optical signal is not being received from the transmitter . T ransmitter is not powered on. Check power connections. Replace power supply if necessary .
16 C1649M (1/06) Specifications VIDEO Number of Channels 2 Modulation T ype Pulse code m odulation, 8-bi t resolution Video Outpu t BNC, 1.0 Vp-p, 75 ohms or UTP , 100 ohms; NTSC, P AL, and SECAM Bandwidth 6.
C1649M (1/06) 17 OPTICAL POWER BUDGET , TRANSMISSI ON DIST ANCE, AND LASER CLASS 1 LIMIT FR8302A Recei ver Compatible T ransmitters Wavelength Optical Power Budget Maximum T ransmission Distance Laser Class 1 Limit* Multimode (62.5/125 µm) FR8302AMSTR-2 F T8301AMSTR F T8301AMST F T8301MST 850 nm 20 dB † 2 km (1.
18 C1649M (1/06) This equipment contains electrica l or electronic components that must be recycled properly to comply with Directive 2002/96/EC of the European Union regarding the disposal of waste electrical and electronic equipment (WEEE). Contact your local de aler for procedures for recycling this equipment.
PRODUCT WARRANTY AND RETURN INFORMATION WARRANTY Pelco will repair or replace, without charge, any merc handise pr oved defective in ma terial or wor kmanship for a period of one year after the date of shipment. Exception s to this warrant y are as noted be low: • Five years on F T/FR8000 Series fiber o ptic products.
Worl dwide Headquarters 3500 Pelco W ay Clovis, California 93612 USA USA & Canada T el: 800/289-9100 Fax: 800/289-9150 International T el: 1-559/292-1981 Fax: 1-559/348-1120 www .
An important point after buying a device Pelco FR8302A (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Pelco FR8302A yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Pelco FR8302A - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Pelco FR8302A you will learn all the available features of the product, as well as information on its operation. The information that you get Pelco FR8302A will certainly help you make a decision on the purchase.
If you already are a holder of Pelco FR8302A, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Pelco FR8302A.
However, one of the most important roles played by the user manual is to help in solving problems with Pelco FR8302A. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Pelco FR8302A along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
