Instruction/ maintenance manual of the product FR8301A Pelco
Go to page of 24
INST ALLA TION F T8301A/FR8301A Fiber T ransmitter and Receiver Single-Channel Digitally Encoded Video C1679M (1/06).
.
C1679M (1/06) 3 Contents Important Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Regulatory Not ices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4 C1679M (1/06) Important Safety Instructions 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water . 6. Clean only with dry cloth. 7. Do not block any ventilation openings.
C1679M (1/06) 5 The product and/or manual may bear the following marks: This symbol indicates that dangerous voltage constituting a risk of electric shock is present within this unit. This symbol indicates that there are important operating and maintenance instructions in the literature accompanying this unit.
6 C1679M (1/06) Regulatory Notices This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful in terference, and (2) this device must accept any interference received, including interfer ence that may cause undesired operation.
C1679M (1/06) 7 Product Overview DESCRIPTION The F T8301A/FR8301A fiber transmitter and receiver provide the ability to transmit one composite video channel over one optical fi ber (refer to Figure 1).
8 C1679M (1/06) MODELS The F T8301A/FR8301A fiber transmitter and receiver consist of the following series of models: Multimode Models:* F T8301AMSTR Single-channel fiber optic video tr ansmitter; mul.
C1679M (1/06) 9 FRONT PANEL The front panel of the F T830 1A trans mitter and the FR8301A receiver provides LE D indicators that allow you to monitor signal st atus, laser status, and operating power (refer to Figure 2).
10 C1679M (1/06) REAR PANEL Connections to the F T8301A transmitter and FR8301A receiver are made to the rear panel of the modules (refer to Figure 3). Figure 3. Rear Panel of F T8301A T ran smitter and FR8301A Receiver NOTE: The F T8301A transmitter/FR8301A receiv er provides two video connectors: one UTP connector and one BNC connector .
C1679M (1/06) 11 Installation PACKAGE CONTENTS The following it ems are supplied: 1 F T8301A transmitter or FR8301A receiver 1 Regulated switching power suppl y with four plug adapt ers (North American, Australian, U.K., and European configurations); 100-240 VA C, 50-60 Hz input, 12 VDC output 1 Wall clip with two 4-40 x .
12 C1679M (1/06) MOUNTING THE T RANSMITTER/RECEIVER TO A W ALL The F T8301A transmitter/FR8301A receiver can be mounted to a wall in the following ways: • Using the supplied wall clip fo r attachment of a single module to a wa ll. For installation instructions, refer to the Mounting the T ransmitter/Rece iver Using the Wall Clip section.
C1679M (1/06) 13 Figure 4. Mounting the F T8301A T ransmitter/FR 8301A Receiver Using the W all Clip W ALL CLIP LOWER FLANGE SCREW , PHILLIPS P AN HEAD WITH LOCK W ASHER (2) HORIZONT AL MOUNTING HOLE .
14 C1679M (1/06) CONNECTIONS Connections to the F T8301A transmitter and the FR8302A receiver are made on t he rear panel of the modules and consist of the following: • Power connection NOTES: – A 12 VDC or 24 VA C power supply can be used to power the transmi tter/receiver when used as a standalone modul e.
C1679M (1/06) 15 Figure 6. FR8301A Receiver Conn ections POWER CONNECTION FOR ST ANDALONE MODULE FIBER OPTIC CABLE COAXIAL CABLE UTP WIRES OR POWER/ALARM CONNECTION FOR RACK-MOUNTED MODULE + - 1.
16 C1679M (1/06) T roubleshooting LED indicators on the front panel of the F T8301A tr ansmitter/FR8301A receiver (refer to Figure 2) allow you to monitor signal stat us, laser status, and operating power . T able A provides information about the front-panel indicators a nd associated troublesho oting guidelines.
C1679M (1/06) 17 Optic Fault LED - T ransmitter Green Laser is operating properly . – No action required. Flashing red Laser has shut down. T ransmitter is operating in extreme conditions, for example, operating temperature is below or above recommended range as stated in the the Specifications section.
18 C1679M (1/06) Specifications VIDEO Number of Channels 1 Modulation T ype Pulse code m odulation, 8-bi t resolution Video Input (F T8301A)/ BNC, 1.0 Vp-p, 75 ohms or UTP , 100 ohms; Video Outpu t (FR8301A) NTSC, P AL, and SECAM Bandwidth 6.
C1679M (1/06) 19 OPTICAL POWER BUDGET , TRANSMISSION DIS T ANCE, AND LASER CLASS 1 LIMIT - F T8301A TRANSMITTER AND COMP A TIBLE RECEIVERS F T8301A T ransmitter Compatible Receivers Wavelength Optical Power Budget Maximum T ransmission Distance Laser Class 1 Limit* Multimode (62.
20 C1679M (1/06) OPTICAL POWER BUDGET , TRANSMISSION DIS T ANCE, AND LASER CLASS 1 LIMIT - FR8301A RECEIVER AND COMP A TIBLE TRANSMITTERS FR8301A Receiver Compatible T ransmitters Wavelength Optical Power Budget Maximum T ransmission Distance Laser Class 1 Limit* Multimode (62.
C1679M (1/06) 21 This equipment contains electrica l or electronic components that must be recycled properly to comply with Directive 2002/96/EC of the E ur opean Union rega rding the disposal of waste electrical and electronic equipment (WEEE). Contact your local dealer for procedures for recycling this equi pment.
.
PRODUCT WARRANTY AND RETURN INFORMATION WARRANTY Pelco will repair or replace, without charge, any merc handise pr oved defective in mate rial or work manship for a period of one year after the date of shipment. Exception s to this warrant y are as noted be low: • Five years on F T/FR8000 Series fiber o ptic products.
Worl dwide Headquarters 3500 Pelco W ay Clovis, California 93612 USA USA & Canada T el: 800/289-9100 Fax: 800/289-9150 International T el: 1-559/292-1981 Fax: 1-559/348-1120 www .
An important point after buying a device Pelco FR8301A (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Pelco FR8301A yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Pelco FR8301A - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Pelco FR8301A you will learn all the available features of the product, as well as information on its operation. The information that you get Pelco FR8301A will certainly help you make a decision on the purchase.
If you already are a holder of Pelco FR8301A, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Pelco FR8301A.
However, one of the most important roles played by the user manual is to help in solving problems with Pelco FR8301A. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Pelco FR8301A along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
